Professional Documents
Culture Documents
pdf
May 9,2016
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2& -@
F -'12&# 30-.#,'0#!2'4#
|z{{GG -,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*," *#!20-,'! /3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur
5# 1'2#'Mur21A..roc&$o0 -'
H&22.BGG555@+302@!-+G#,-
#3G13..-02G!-+.*',!#G0-&1J@
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
EMIFILr, EMIGUARDr,
"EMIFIL" and "EMIGUARD" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
Product Guide / Effective Frequency Range p2
EMIGUARDr
Disc Type EMIFILr
Part Numbering p11
DSS1 Series p12
Heavy-duty Type DSN9H/DST9H Series p14
!Caution / Notice
!Caution / Notice p27
Soldering and Mounting p28
Packaging p30
BL01/02/03
DSN9H
DSS1
DST9H
EMIGUARDr
(EMI Filters with varistor functions)
VFC2H
VFR3V
VFS6V/9V
PLT09H
2
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
Outline
o Ferrite Bead Inductors are effective for frequencies
Equivalent Circuit
ranging from a few MHz to a few GHz. Ferrite Bead
Inductors are widely used as a low noise countermeasure, R(f)
140
120
Impedance (Ω)
100
Z R
80
60
X
40
20
0
0.5 1 2 5 10 20 50 100 200 500 1000
Frequency (MHz)
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
DSS1 DSp9H
Outline
o This capacitor type EMI suppression filter has a large
noise suppression effect at frequencies ranging from a
few MHz to hundreds of MHz. This type of filter is used
widely as a universal, high performance EMI suppression
component.
o Three-terminal construction reduces residual inductance,
thereby substantially improving noise suppression at
frequencies over 10MHz.
4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
oEMIGUARDr
EMIGUARDr · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · p.17–24
Outline
o EMIGUARDr eliminates both surge noise and EMI noise
Construction of EMIGUARDr (VFS9V)
applying some unique design like the use of dielectric
varistor material to a 3 terminal capacitor.
o Effective when high frequency noise and high voltage Varistor
surge suppression are required, and also in situations Electrode
when surging starts at extremely high speeds. This type
of surging cannot be eliminated with general type Ferrite
varistors.
Lead
4kV
500V
/div
No filter
–1kV
–100ns 50ns/div 400ns
4kV
500V
/div
Three-terminal capacitor is
used to suppress the surge.
–1kV
–100ns 50ns/div 400ns
4kV
500V
EMIGUARDr is used to /div
suppress the surge. (VFS6V)
–1kV
–100ns 50ns/div 400ns
5
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
PLT09H
Outline
o These choke coils reduce common mode noise, which
Construction of Common Mode Choke Coil
causes problems on balanced transmission lines, and are
effective against common mode noise in the several MHz
to several 100MHz frequency range.
They are ideally suited for noise suppression on DC power
supply lines and interface cables.
Equivalent Circuit
6
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
(Part Number) BL 02 RN 2 R1 M 2 B
EMIGUARDr
02 Beads ø3.4 M Bulk, Radial Type, 10.0mm
03 Beads ø2.3 max. N Taping, Radial Type, 16.5mm BL02/BL03
P Taping, Radial Type, 18.5mm
3Beads Core Material Q Taping, Radial Type, 20.0mm
Code Beads Core Material
RN Standard Type 7Lead Diameter
Code Lead Diameter
!Caution / Notice
Axial Crimp Type
R1 Radial Straight Type BL02/BL03
R2 Radial Straight and Wave Formed Leads Type BL02
R3 Radial Incrimp Type BL02
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
Features
ø3.6±0.15
BL01/02/03 series are ferrite beads with lead wires to
ø0.65
produce a high frequency loss for suppression of
Disc Type EMIFILr
*
*
7.5 max.
* *
3.7±1.0
ø0.65
15.0 min.
10±1.0
Common Mode Choke Coils
ø3.6±0.15
ø0.65
5.0±0.8
10.0±1.0
BL01RN1A2A2B BL02RN1R2M2B
5.0±0.3
*Coating extending on leads : 1.5 max. (in mm) *There is excess bond stick on the wire. (in mm)
7.5 max.
* *
12.0 max.
15.0 min.
15.0 min.
ø0.65
5.0±0.8 5.0±0.8
10.0±1.0
5.0±1.0
ø0.65
BL02RN1R3J2B BL02RN2R1M2B
Soldering and Mounting
*There is excess bond stick on the wire. (in mm) (in mm)
15.0 min.
15.0 min.
Packaging
5.0±0.8
5.0±0.8 ø0.60
10.0±1.0
5.0±1.0
ø0.65
BL02RN2R3J2B BL03RN2R1M1B
(in mm)
(in mm)
8
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
BL01/BL02/BL03 Series
EMIGUARDr
BL02RN2R3N1A 6 -40 to +85°C
BL03RN2R1M1B 6 -40 to +85°C
BL03RN2R1N1A 6 -40 to +85°C
BL03RN2R1P1A 6 -40 to +85°C
BL03RN2R1Q1A 6 -40 to +85°C
Please refer to p.30, "Packaging" for Dimensions of Part Numbers Except for 'B' for the last code.
!Caution / Notice
(Resistance element becomes dominant
at high frequencies.)
140 140
120 120
Impedance (Ω)
Impedance (Ω)
100 100
80 80
Z Z
60 60
R R
Packaging
40 40
X X
20 20
0 0
0.5 1 2 5 10 20 50 100 200 500 1000 0.5 1 2 5 10 20 50 100 200 500 1000
Frequency (MHz) Frequency (MHz)
Continued on the following page.
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
Continued from the preceding page.
Impedance - Frequency Characteristics
Ferrite Beads Inductors
BL02RN2 BL03RN2
160 160
140 140
120 120
Impedance (Ω)
Impedance (Ω)
100 100
Z R
80 80
Z
60 60
R
X
Disc Type EMIFILr
40 40
X
20 20
0 0
0.5 1 2 5 10 20 50 100 200 500 1000 0.5 1 2 5 10 20 50 100 200 500 1000
Frequency (MHz) Frequency (MHz)
(EMIFILrwith Varistor Function)
EMIGUARDr
Common Mode Choke Coils
!Caution / Notice
Soldering and Mounting
Packaging
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
EMIGUARDr
S Built-in Ferrite Beads Type 2A 100V
T with Ferrite Beads Type 2E 250V
3Style 7Capacitance
Code Style Expressed by three alphanumerics. The unit is in pico-farad (pF).
The first and second figures are significant digits, and the third
1
Expressed by a letter. figure expresses the number of zeros that follow the two figures.
9
8Lead Type/9Packaging
Code Lead Type Lead Length* (mm) Packaging Series
Q55B
!Caution / Notice
25.0 min. All series
Bulk
Q50B 4.0±0.5 DST9H
Q91A Straight 20.0±1.0 DSN9H, DSS1N
Q92A 16.5±1.0 Ammo Pack
DSp9H
Q93A 18.5±1.0
*Lead Distance between Reference and Bottom Planes Except for Bulk.
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
8.5 max.
Features 3.5 max.
7.5 max.
DSS1 series is a compact, high performance
lead type 3 terminal capacitor which can be
Disc Type EMIFILr
25.0 min.
ø0.56
high frequency performance. 5.0+0.8
-0.2
Wide capacitance variation enables flexible
selection for various noise frequencies.
DSS1_Q55B Series
High speed mounting is available with automatic
insertion machine. (in mm)
(EMIFILrwith Varistor Function)
EMIGUARDr
12
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
10.0max
obtain high insertion loss in a wide frequency range.
Disc Type EMIFILr
1.5max
frequency performance. High rated voltage of 250Vdc
and wide operating temperature range from -40 degrees C 2.5±0.5
1.0±0.5
25.0min
to 105 degrees C are suitable for high reliability 5.0±0.5
circuits. ø0.65
DSN9H_Q55B
15.5 max.
Ferrite bead
1.5 max.
2.5±0.5
Common Mode Choke Coils
5.0±0.5
I
1.25±0.5
I1
ø0.65
DST9H_Q55B
GND
Q55 Type: I=25.0 min.
Q50 Type: I1=4.0±0.5
(in mm)
DSN9H Series
!Caution / Notice
40
60
Packaging
80
GND
100
No Polarity.
120
0.1 1 10 100 1000
Frequency (MHz)
14
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
EMIGUARDr
80
GND
100
No Polarity.
120
0.1 1 10 100 1000
Frequency (MHz)
15
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
1 2 3 4 5 6 7 : ;
VF C 2 H R7 1D 105 K 2 T51 B
1 2 3 4 5 6 7 8 9 : ;
Code Structure
S Built-in Ferrite Beads Type 6Rated Voltage
R with Resistance Code Rated Voltage
C Built-in Capacitor 1B 12V
1D 22V
3Style 1E 25V
Code Style
Common Mode Choke Coils
2 7Capacitance
3 Expressed by three alphanumerics. The unit is in pico-farad (pF).
Size is expressed by a digit The first and second figures are significant digits, and the third
6
figure expresses the number of zeros that follow the two figures.
9
8Capacitance
4Features Code Capacitance
Code Features K ±10%
V with Varistor Function
9Varistor Voltage
!Caution / Notice
:Lead Type/;Packaging
Code Lead Type Lead Length* Packaging Series
T51B 25.0mm min. Bulk
Incrimp VFR3/VFS6
U31A 18.5±1.0mm Ammo Pack
Soldering and Mounting
16
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
VFC2H Series
4.0 max.
5.0 max. 3.0 max.
VFC2H series is EMI suppression filters of lead type
that combines the varistor and capacitor.
26.0±1.0
inductive load of motors, relays, etc. 5.2±0.5
EMIGUARDr
(2) (1)
!Caution / Notice
Soldering and Mounting
Packaging
17
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
5.0 max.
of IC. It efficiently absorbs ESD surges rushed into No.1 Pin Indicator
(Surge entrance side)
IC's I/O terminal.
2.5±0.5
25.0 min.
Applications ø0.45±0.1
5.0±0.5
10
20
Insertion Loss (dB)
Common Mode Choke Coils
30
40
50
60
70
5 10 100 1000
Frequency (MHz)
!Caution / Notice
Soldering and Mounting
Packaging
18
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
10.5 max.
*2
VFS6V series is designed for surge protection of
signal line. It protects electric circuit from surges *1
25.0 min.
Built-in ferrite bead gives excellent EMI suppression. 2.5±0.5
5.0±0.5
Applications
ø0.6
communication terminals.
EMIGUARDr
Equivalent Circuit Insertion Loss Characteristics
(50Ω - 50Ω)
0
20
40
GND
No Polarity
60
10.0 100.0 1000.0
Frequency (MHz)
!Caution / Notice
Soldering and Mounting
Packaging
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
10.5 max.
1.5 max.
the power supply. It protects electric circuits from Ferrite bead
*1
surge such as static electricity and suppresses EMI
noise. Its large capacitance value enables high 2.5±0.5
25.0 min.
2.5±0.5
insertion loss for EMI noise. 5.0±0.5
ø0.65
(50Ω - 50Ω)
0
20
Insertion Loss (dB)
40
60
GND
80
!Caution / Notice
No Polarity
100
0.1 0.5 1 5 10 50 100 500 1000
Frequency (MHz)
200
100
Current (mA)
–30 –20
–40 –10 0 10 20 30 40
–100
–200
–300
Packaging
Voltage (V)
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
o Result (Result)
Breakdown level
Varistor VFR3V can protect IC from ESD. [kV]
Without VFR3V With use VFR3V
30 min.
EMIGUARDr
20
15
10
ANT
!Caution / Notice
Signal
F
1MHz Noise Radiation Cable (50cm)
ACO4
Shield
70
Soldering and Mounting
Noise Level (dBμV/m)
60
50
Before Countermeasures
40
(No Filters)
30
20
30 90 150 210 270 330
Frequency (MHz)
70
Noise Level (dBμV/m)
60
Packaging
50
Using VFR3VD31E131T51
40
30
20
30 90 150 210 270 330
Frequency (MHz)
21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
Features (VFS9V)
Items Test methods Rated values
1.4 times the varistor voltage (V1) is applied for 5 minutes at room
Overload
temperature.
High At a temperature of 85±3°C, the varistor voltage V1 is continuously *V1: Voltage when 1mA is applied
Temperature applied to the sample for 1000 to 1024 hours.
Load Then it is left at room temperature, for 4 to 24 hours before measuring.
(EMIFILrwith Varistor Function)
EMIGUARDr
VFS9V
100
Capacitance: 0.022μF
with varistor function
Residual Rate (%)
!Caution / Notice
3-terminal capacitor V
50 Capacitance: 0.022μF
with no varistor
800ns
function
Residual ratio
when 1000 pulses
are applied
0
0 500 1000 1500 2000
Pulse Voltage Applied (V)
Soldering and Mounting
Temperature Characteristics of
Varistor Voltage - Insulation Resistance (VFS9V)
Change Rate of Varistor Voltage (%)
104
Insulation Resistance (MΩ)
–10
10
1
–30 0 30 60 90
Temperature (°C)
22
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
: 200V/div
: 10ns/div
Waveform when EMIGUARDr is not
100 used.
90
80 (Surge from a noise simulator.)
without EMIGUARDr
EMIGUARDr
20
10
0%
Without Filters
!Caution / Notice
Noise wave applied
20
10
0%
90
80
most of the lead line inductance. This
allows VFS9V to completely absorb the
rising and falling edges of the applied
20
10 pulses.
0%
23
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
200ns
1300V
Without Filters
Disc Type EMIFILr
20
10
0%
EMIGUARDr
20
10
0%
20
10
!Caution / Notice
0%
Soldering and Mounting
Packaging
24
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
EMIGUARDr
3Applications 8Lead Dimensions
Code Applications Code Lead Dimensions
09H for DC Line High-frequency Type 1 5mm
4Features 9Packaging
Code Features Code Packaging Series
5Inductance
Expressed by three figures. The unit is micro-henry (μH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
!Caution / Notice
Soldering and Mounting
Packaging
25
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
13 max.
PLT09H series is a common mode choke coil for DC
lines. It is effective against the common mode noise
that can cause radiative noise in power supply lines 14 max.
5±1 8 max.
inductance enables high suppression effect to
ø0.6 max.
radiation noise.
5±0.5 Soldered 10±0.5
(1) (2)
Features
PLT09H Series
1. This is a wide frequency range type, applicable in
applications ranging from a few MHz to several (in mm)
(4) (3)
(EMIFILrwith Varistor Function)
100MHz.
2. It features a low-profile design.
EMIGUARDr
Applications
1. Noise suppression of SW power supply, DC-DC converter
2. DC power lines in AC adapter of Portable equipment
Part Number
(A) (Vdc) (Vdc) (µH)
PLT09HN2003R0P1 3 50 125 20 min.
Operating Temperature Range: -40 to +85°C
(1) (2)
Insertion Loss (dB)
10
15
20
(4) (3)
25
Soldering and Mounting
No polarity.
30
0.1 1 10 100 1000
Frequency (MHz)
Packaging
26
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
!Caution/Notice
EMIGUARDr
side.) Smoking and firing maybe caused by incorrect mounting
as in Fig.2. (The center terminal and the other terminals cross
when viewing the product from the side.)
Notice
o Storage and Operating Conditions
!Caution / Notice
Use the products within 12 months after delivery.
Solderability should be checked if this period is n: Times applied
exceeded. C: Charging Capacitance (pF)
2. Storage Conditions V: Testing Voltage (kV)
(1) Storage temperature: -10 to 40 degrees C R: Charging Resistance (Ω)
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity. o Soldering and Mounting
(2) Do not store products in a chemical atmosphere 1. Washing Soldering and Mounting
such as chlorine gas, acid or sulfide gas. Failure and degradation of a product are caused
(3) When restoring taping type (BL01RN1A1F1J), by the washing method. When you wash in conditions
please attach the spacer between the flanges of the that are not in the mounting information, please contact
reel. The spacer is corrugated paper that is attached Murata engineering.
when shipping. 2. Soldering
<Using EMIGUARDr effectively> Reliability decreases with improper soldering
1. Terminal (with mark) should be properly connected to methods. Please solder by the standard soldering
the line of incoming electrostatic surge. (There is conditions shown in the mounting information.
polarity.) Otherwise, no effect in ESD suppression can 3. Other
be expected (VFR3V). Noise suppression levels resulting from Murata's
Packaging
1. Mounting Hole
Mounting holes should be designed as specified below.
Part Number Bulk Type (in mm) Taping Type (in mm)
VFR3V ø0.8-3
VFS6V
DSS1
2.5±0.2 2.5±0.2
Disc Type EMIFILr
DSN9H
1.0±0.2
ø0.8-3
DST9H
1.25±0.2
ø0.8-3
(EMIFILrwith Varistor Function)
2.5±0.2 2.5±0.2
EMIGUARDr
2.5±0.2 2.5±0.2
VFS9V
2.5±0.2
ø0.8-3
Common Mode Choke Coils
2.5±0.2 2.5±0.2
VFC2H
ø0.8-2 ø1.0-2
5.2±0.4 5.2±0.4
!Caution / Notice
2. Soldering
(1) Use Sn-3.0Ag-0.5Cu solder. Pre-heating Soldering
Gradual cooling
(in air)
300
(2) Use Rosin-based flux. Do not use strong acidic flux with Soldering temperature
Temperature (°C)
250
halide content exceeding 0.2wt% (chlorine conversion
200
value). 150°C
150
(3) Products and the leads should not be subjected to any
100
mechanical stress during the soldering process, or while
50
subjected to the equivalent high temperatures.
Soldering and Mounting
28
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
EMIGUARDr
Common Mode Choke Coils
!Caution / Notice
Soldering and Mounting
Packaging
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
Packaging
Ferrite Beads Inductors
Taping Dimensions
±0.15
Disc Type EMIFILr
5±0.3 ø0.60±0.05
BL01RN_A BL02RN1R2p1A
ø3.6
ΔS
0 max.
7.5 max.
Direction of feed
P2 P 3.4±0.2
7.5 max.
5±0.5
*
1.2 max.
Δh2
W2
P1 F ød Δh1
H1
W1
L
W0
3.2 min.
W
0.8 max. L1 L2 0.8 max.
*L 6.0±1.0 D0
I
| L1 - L2 | <
(EMIFILrwith Varistor Function)
=1.5 P0
t
*L BL01RN1A1F1A : 52+2/-1
*There is excess bond stick on the wire.
EMIGUARDr
BL01RN1A1E1A : 26+1.5/-0
BL02RN1R3N1A BL02RN2R1p1A
ΔS ΔS
7.5 max.
W2
W2
P1 F P1 F ød
H1
H1
W1
W1
L
L
W0
W0
W
W
Common Mode Choke Coils
D0 D0
I
I
P0
t
P0
t
BL02RN2R3N1A BL03RN2R1p1A
ΔS ΔS
P2 P 9.0 max. 3.4±0.2 P2 P 8.3 max. 2.3 max.
6.5 max.
12.0 max.
W2
H1
W1
W1
L
L
W0
W0
W
W
!Caution / Notice
D0 D0
I
I
t
t
P0 P0
30
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. C30E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
May 9,2016
Packaging
Taping Dimensions
EMIGUARDr
7.5 max.
8.0 max. 3.5 max.
DSN9_ : 9.5 max. DSN9_ : 4.0 max.
DSN9_ : 11.0 max.
20.0±1.0
2.5+0.4/-0.2
6.35±1.3 12.7 0±1.0
11.0+0/-1.0
*1
5.0+0.8/-0.2
1.0 max. 1.0 max. 9.0+0/-0.5
3.85±0.7 *2
1.5±1.5
12.0±0.5
3.85±0.7
11.0+0/-1.0 1.5±1.5 ø0.6
H
18.0±0.5
9.0+0/-0.5
18.0±0.5
12.0±0.5
ø0.6
12.7±0.2
1.5 max. 0.7±0.2
H
Q91 Type : 20±1.0 *1 The bottom of the dielectric may be exposed.
Q92 Type : 16.5±1.0 *2 If a hole is on the top of the ferrite bead, the bead should not be exposed.
Q93 Type : 18.5±1.0
DST9H_Q92/Q93 VFS6V_U31
!Caution / Notice
2.5+0.4/-0.2 2.54 max.
5.0+0.8/-0.2 2.5+0.4/-0.2
6.35±1.3 12.7 8.0 max 0±1.0
6.35±1.3 12.7 9.5 max. 0±1.0 1.0 max. 1.0 max. 1.0 max. 1.0 max.
*2
1.5±1.5
15.5 max.
*1
1.5±1.5
3.85±0.7 3.85±0.7
11.0+0/-1.0 11.0+0/-1.0
ø0.6
H
9.0+0/-0.5
ø0.6
9.0+0/-0.5
18.0±0.5
12.0±0.5
18.0±0.5
2.5+0.4/-0.2
12.0±0.5
2.5+0.4/-0.2
H
1.5 max.
0.7±0.2
ø4.0±0.1 ø4.0±0.1
0.7±0.2
VFS9V_Q91/Q92/Q93 VFR3V_U31
7.5 max.
2.5+0.4/-0.2 5.0+0.8/-0.2
12.0 max. 0±1.0 2.5+0.4/-0.2
6.35±1.3 12.7 2.3 max.
1.0 max. 1.0 max. 6.35±1.3 12.7 8.0 max. 0±1.0
*2 H 11.0 max.
5.0 max.
1.5±1.5
AY AY AY
3.85±0.7
3.85±0.7
18.5±1.0
ø0.6
*2 H
5.0+0.8/-0.2 2.5+0.4/-0.2
12.0±0.5
18.0±0.5
9.0+0/-0.5
*1
12.0±0.5
18.0±0.5
Packaging
2.5+0.4/-0.2
Point A
+0.5 to -1.0
0.7±0.2
ø4.0±0.1
12.7±0.2 12.7±0.2 ø4.0±0.1
1.5 max.
0.7±0.2
H *1 Coating extending on leads does not exceed the start of the bend (point A).
Q91 Type : 20±1.0 Exposed electrodes are covered with solder.
Q92 Type : 16.5±1.0 *2 H: to be measured from the forming point A.
Q93 Type : 18.5±1.0 *3 The deviation between two ferrite beads should be less than 1.2mm.
(in mm)
Packaging
Ferrite Beads Inductors
18.0±1.0
1.5±1.5
11.0+0/-1.0
9.0+0/-0.5
ø0.48
3.85±0.7
Disc Type EMIFILr
12.0±0.5
18.0±0.5
+0.5 to -1.0
1 2 ø4.0±0.1
12.7±0.2
1.5 max.
(2) (1)
0.6±0.3
(in mm)
(EMIFILrwith Varistor Function)
EMIGUARDr
Common Mode Choke Coils
!Caution / Notice
Soldering and Mounting
Packaging
32
C30E.pdf
May 9,2016
Cat. No. C30E-5
Global Locations
For details please visit www.murata.com
Note
1 Export Control 2 Please contact our sales representatives or 3 Product specifications in this catalog are as of
product engineers before using the products in January 2016. They are subject to change or
For customers outside Japan: this catalog for the applications listed below, our products in it may be discontinued without
No Murata products should be used or which require especially high reliability for the advance notice. Please check with our sales
sold, through any channels, for use in the prevention of defects which might directly representatives or product engineers before
design, development, production, utilization, damage a third party’s life, body or property, or ordering. If there are any questions, please contact
maintenance or operation of, or otherwise when one of our products is intended for use our sales representatives or product engineers.
contribution to (1) any weapons (Weapons of in applications other than those specified in
Mass Destruction [nuclear, chemical or biological this catalog. 4 Please read rating and CAUTION (for storage,
weapons or missiles] or conventional weapons) operating, rating, soldering, mounting and
1 Aircraft equipment handling) in this catalog to prevent smoking
or (2) goods or systems specially designed or
intended for military end-use or utilization by and/or burning, etc.
2 Aerospace equipment
military end-users.
3 Undersea equipment 5 This catalog has only typical specifications.
For customers in Japan: Therefore, please approve our product
4 Power plant equipment specifications or transact the approval sheet
For products which are controlled items subject for product specifications before ordering.
to the “Foreign Exchange and Foreign Trade Law” 5 Medical equipment
of Japan, the export license specified by the law
6 Please note that unless otherwise specified, we
is required for export. 6 Transportation equipment (vehicles, trains,
shall assume no responsibility whatsoever for any
ships, etc.)
conflict or dispute that may occur in connection
7 Traffic signal equipment with the effect of our and/or a third party’s
intellectual property rights and other related
8 Disaster prevention / crime prevention rights in consideration of your use of our products
equipment and/or information described or contained in our
catalogs. In this connection, no representation
9 Data-processing equipment shall be made to the effect that any third parties
are authorized to use the rights mentioned above
10 Application of similar complexity and/or
under licenses without our consent.
reliability requirements to the applications
listed above
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
www.murata.com