Professional Documents
Culture Documents
DIY Manual PDF
DIY Manual PDF
LASER
PRINT
TRANSFER
TO
T-SHIRT
BY
ANDRES
CARRION
1969:
-Gary Starkweather develop the first
designs for a laser printer. Frist known
as EARS. Later known as Xerox 9700
Laser Printer.
1976:
First commercial model by IBM. The
IBM 3800 replaced line printers and had
a high volume of printing (215 ppm).
1977:
- Release of the Xerox 9700, not spe-
cifically targeted, but best for cutsheet
paper. Gary Starkweather
1981:
- Xerox Star 8010, first
office laser printer.
Revolutionary for admin
jobs around the world.
IBM 3800
1985:
- Laser Writer adopts the
PostScript page-description
language. This meant a super
boost to the technology required
to produce cheap laser printer
for the general consumer.
1990:
- the first laser printer under HP Laserjet IIP
$1000 was released- the HP
Laser Jet IIP
1995:
First color laser printer by
Apple: the Color Laser Writer
12/600PS, with a cost of $7000.
2000:
Xerox introduce Solid Ink
printing to their line, a process
derived from laser printing
technology.
Apple_Color_LaserWriter_12-600_PS
How to:
make your own T-Shirt by transferring a Laser Print in
to fabric.
And….
TWO:
Place the design face down over your T-shirt
THREE:
Pour acetone over the design (or you
can use a brush to spread it, I did it,
it’s not cheating.)
You will notice that you can pretty
much see the design through the pa-
per, so… it’s time to rub (be gentle, no
need to hurry)
Check how the design is transferring
every now and then. Then check
again. :p
work?
[why does it
breaks the
The acetone
e paper and
surface of th
r particles to
allow the lase e
transfer to th
get loose and
fabric.]
Thanks
and
enjoy!!!
Keep tuned for future manuals!!!