Professional Documents
Culture Documents
RhinoGold 4.0 - Level 1 - Tutorial 013P - Pearl Pendant PDF
RhinoGold 4.0 - Level 1 - Tutorial 013P - Pearl Pendant PDF
In this tutorial we will try out some of the most useful com-
mands in RhinoGold. Powerful tools as Pipe, Helix and Pearls.
Circle Helix
1 2 Now, still in the top view, we can define a Helix
Under the Drawing tab with the Circle tool in the
top view we can make a circle to support the next around the circle created before. Under the
step, in this case with 20mm diameter. Drawing tab with the Helix tool, in this case with 7 turns, as
the above image.
Scale 1D Pipe
3 Then, under the Transform tab with the Scale 1D tool
4 Now, under the Modelling tab with the Pipe tool we
in the front view we can adjust the Helix height, in can create a solid around the Helix. Just need to
this case to reduce till 2mm. select the curve who defines the Helix and give the pre-
tended tickness, in this case 1,5mm.
Dynamic Profile
7 At this time we need to define the pendant bail, for
this, under the Jewellery tab with the Dynamic Profi-
le tool we can adjust all the parameters as the pretended
results.