Log firing 24 hours up to kiln o/L hood reaches 250c
250c /hr up to 1050c -> 3days Oil flow rate 40litters /hr -100litters Cooler main door open Cooler oversize chute open All slip seals full open Emergency cap fully open Combustion air 1000-1500 Nm3hr Reg no QRT 6 and 7 avg Kiln position no QRT 6 at 3 0, oclock position Kiln ½ rotation for ever 8hours 1st day 6hours 2nd day 4hours 3rd day Kiln inlet hood should raise 60-700c Complete the drying cycle Raise the temperature 30-400c/hr up to 500-6000c Close over size chute Cooler main door close slowly Close from 3000c on wards Dsc temperature 180-2500c Two days Raise the temperature 600-10000c at 500c/hr Continuously rotation at 7000onwards Start injection coal 0.5 t/h fines and medium 7th 6th 1000- 1050 5th 4th 1000-1050 3rd 2nd 1000-980 Feed start at first zone temperature reaches 6500c
S.N DESCRIPTION SPECIFICIATION QUNTITY
1 S.S.304 -8MM DIA TYPE V 85 3200
2 S.S.304 -8MM DIA TYPE V 125 8100 C 3 S.S.304 -8MM DIA TYPE V150 26600 4 S.S.304 -8MM DIA TYPE V 55 1200 5 S.S.304 -8MM DIA TYPE V 45 6000 6 S.S.304 -8MM DIA TYPE V 100 2500 7 S.S.304 -6X25MM FLATE TYPE FLAT Y - 100 1300 8 S.S.304 -6X25MM FLATE TYPE FLAT Y - 200 2400 KI 9 S.S.304 -5X25MM FLATE TYPE FLAT Y - 230 3150 FLAT 50 50 6 DIA 10 HOLE 10 CENTER TYPE FLAT Y - 175 26600