You are on page 1of 4

Product Specifications

932QLG65VTEB
DualPol® Directed Dipole™, Quad Antenna, 1710–2170 MHz, 65° horizontal beamwidth, RET compatible variable electrical tilt  

 
l Two DualPol® antennas under one radome  
l Continuous wideband coverage  
l Each antenna is independently capable of field adjustable electrical tilt  
l Fully compatible with Andrew Teletilt® remote control system  

CHARACTERISTICS

  

General Specifications
Antenna Type  DualPol® Directed Dipole™, quad 
Brand  DualPol® 
Operating Frequency Band  1710 – 2170 MHz 

Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2170
Beamwidth, Horizontal, degrees 68 67 69
Gain, dBd 15.0 15.4 14.9
Gain, dBi 17.1 17.5 17.0
Beamwidth, Vertical, degrees 7.3 6.8 6.3
Beam Tilt, degrees 0–8 0–8 0–8
Upper Sidelobe Suppression (USLS), typical, dB 15 18 18
Front­to­Back Ratio at 180°, dB 35 35 35
Isolation, dB 30 30 30
VSWR | Return Loss, db 1.5:1 | 14.0 1.35:1 | 16.5 1.5:1 | 14.0
Intermodulation Products, 3rd Order, 2 x 20 W, dBc ­150 ­150 ­150
Input Power, maximum, watts 250 250 250
Polarization   ±45° ±45° ±45°
Impedance, ohms   50 50 50
Lightning Protection   dc Ground dc Ground dc Ground

©2011 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. page 1 of 4
See www.commscope.com/andrew for the most current information. 3/1/2011
Product Specifications
932QLG65VTEB

  

Mechanical Specifications
Color  Light gray 
Connector Interface  7­16 DIN Female 
Connector Location  Bottom 
Connector Quantity  4 
Radome Material  Polycarbonate, UV resistant 
Wind Loading, maximum  542.7 N @ 100 mph
122.0 lbf @ 100 mph 
Wind Speed, maximum  201.2 km/h   |   125.0 mph 
  

Dimensions
Depth  193.0 mm   |   7.6 in 
Length  1312.0 mm   |   51.7 in 
Width  414.0 mm   |   16.3 in 
Net Weight  16.8 kg   |   37.0 lb 
  

Remote Electrical Tilt (RET) Information


Model with Factory Installed AISG 1.1 Actuator  932QLG65R2EB 
Model with Factory Installed AISG 2.0 Actuator  932QLG65A2EB 
RET System  Teletilt® 

Regulatory Compliance/Certifications
Agency Classification
RoHS 2002/95/EC Compliant by Exemption
China RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

 
 

INCLUDED PRODUCTS
DB380 
Pipe Mounting Kit for 2.4 ­ 4.5 in (60 ­ 115 mm) OD round members 

DB5083 
Downtilt Mounting Kit for 2.4 ­ 4.5 in (60 ­ 115 mm) OD round members 

©2011 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. page 2 of 4
See www.commscope.com/andrew for the most current information. 3/1/2011
Product Specifications
932QLG65VTEB

©2011 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. page 3 of 4
See www.commscope.com/andrew for the most current information. 3/1/2011
Product Specifications
932QLG65VTEB

Horizontal Pattern Vertical Pattern

   

   

   

©2011 CommScope, Inc. All rights reserved.


All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. page 4 of 4
See www.commscope.com/andrew for the most current information. 3/1/2011

You might also like