Professional Documents
Culture Documents
Critical Wear Areas & Vacuum Test Locations: Lower Valve Body - 09G Shown
Critical Wear Areas & Vacuum Test Locations: Lower Valve Body - 09G Shown
0
10
5
NOTE: OE valves are shown in rest position and should be tested in rest position unless otherwise indicated. Test locations are pointed to VACUUM
TEST
with an arrow. Springs are not shown for visual clarity. Low vacuum reading indicates wear.
Main Pressure
Regulator Valve
C1/K1 Clutch
• Low line in Drive/Reverse
• High line pressure in Reverse
Control Valve
• Overheated fluid & TCC lining • Coastdown Neutral
• Bushing failure • Delayed Forward
• Gear ratio & solenoid codes
Replace with Sonnax Part No.
15741-01K • K1/C1 Clutch burned
Requires F-15741-TL & VB-FIX • Erratic shift timing
• Flare/Harsh shifts
Replace with Sonnax Part No.
K2 Clutch 15741-25K (sleeve/valve style)
Requires F-15741-TL25 & VB-FIX or
Control Valve 15741-55K (oversized valve style)
Plug hole on
• 3-4 Flare • K2 Clutch burned other side. Requires F-15741-TL55 & VB-FIX
• Gear ratio & solenoid codes
• Erratic shift timing • Harsh shifts
Replace with Sonnax Part No.
15741-05K (Sleeve/valve style)
B1 Clutch
Requires F-15741-TL5 & VB-FIX or Control Valve
15741-57K (Oversized valve style) • 1-2, 5-6 Flare • 2nd, 6th Slip
Requires F-15741-TL57 & VB-FIX • Gear ratio & solenoid codes
• B1 Clutch burned
• Erratic shift timing
O-Ringed End Plugs • Harsh shifts
• Shift concerns associated Replace with Sonnax Part No.
with circuit pressure loss 15741-22K (sleeve/valve style)
Replace with Sonnax Part No. Requires F-15741-TL22 & VB-FIX or
0
10
5
NOTE: OE valves are shown in rest position and should be tested in rest position unless otherwise indicated. Test locations are pointed to VACUUM
TEST
with an arrow. Springs are not shown for visual clarity. Low vacuum reading indicates wear.
Middle Valve Body • 09G Shown Click on Sonnax part numbers to see more information.
K1 Switch Valve
Main Relay Valve • Erratic shift timing • Failsafe mode Use rubber mat
• Harsh shifts • Burnt clutches to seal through
• No 4-5-6
Use rubber mat • Overheated fluid • Ratio codes passages shown
• Gear ratio codes with dotted line.
to seal through • Slipping gears • Soft shifts
passages shown Replace with Sonnax Part No. 15741-70K
with dotted line. Requires F-15741-TL70 & VB-FIX
Replace with Sonnax Part No. 15741-63K
Requires F-15741-TL63
& VB-FIX
0
10
5
NOTE: OE valves are shown in rest position and should be tested in rest position unless otherwise indicated. Test locations are pointed to VACUUM
TEST
with an arrow. Springs are not shown for visual clarity. Low vacuum reading indicates wear.
Upper Valve Body #1 • 09G Shown Click on Sonnax part numbers to see more information.
Solenoid Modulator
Valve 2
• Code 734, 735, 729
Accumulator Piston Kit Check with valve • Kickdown slip/shock
N93 fully stroked. • 4th, 5th & 6th Slip
• Poor shift quality • Burnt clutches Accumulator
• Forward slip • Delayed engagement Connection Replace with Sonnax Part No.
15741-18K Requires F-15741-TL18,
Replace with Sonnax Part No. F-15741-TL29PL & VB-FIX
15741-14K
OE Exploded View
Lower Valve Body • 09G Shown
Steel
Check Valves
101
N92 Solenoid
102
104
N282 Solenoid
105
103
N283 Solenoid
106
108
Steel
Check Valves
OE Exploded View
Middle Valve Body (Bottom Side) • 09G Shown
211 202
210 203
204
Plastic
Check Valve 205
206
209
207
208
OE Exploded View
Upper Valve Body • #1 Exploded View • 09G Shown
304 301
305
308
306
307
OE Exploded View
Upper Valve Body • #2 Exploded View • 09G Shown
401
Steel
Check Valves
402
403