Professional Documents
Culture Documents
Install
i. Locate the OVVO connection system install on the Alphacam DVD in the following location:
ExtraAdd-Ins\OVVO\OVVO connection system AddIn.exe
ii. Install the exe.
iii. The files will be located in the following locations:
\LICOMDIR\Styles\OVVO Clips
\LICOMDAT\RTools.Alp\OVVO Tools
\LICOMDIR\VBMacros\Startup
Setup
i. To begin using the OVVO connection system, first you must update the tooling details in Alphacam to suit
the tooling names or numbers within your machine setup.
This tooling has already been created for the fittings and can be accessed in the tooling library however this
must be then changed to suit your tool numbers and your machine feeds and speeds etc.
ii. Once the tooling has been updated the machining style must also be updated with the new tool data.
Open the machine style (OVVO clips) within Alphacam and update all three operations.
iii. Open the OVVO clip drawings, in \LICOMDIR\ Furniture Fittings\OVVO clips. Update all the drawings with the
new machining style.
iv. Under the Add-Ins ribbon in Alphacam, open Add-ins. Enable OVVO Fittings under the free options column.
This then enables a command in the Machine ribbon under Utils.
Application (insertion)
i. Using the Insert tab on the project manager, link to the following folder: \LICOMDIR\Furniture Fittings\OVVO
clips.
ii. Drag and drop the fitting to the desired location.
i. From a 3D model (fittings must first have been drawn in the model), extract the fitting details within Solid
Model Extract\ Automatic Extraction.
ii. Within the Machine ribbon under Utils, you will see a new command called Machine OVVO fittings from 3D.
This will then apply the machining.