1.Standard Value Chart
1-1. Standard value chart for engine, travel speed and
hydraulic pressure «
2.Inspection & Adjustment
2}. Measurement and adjustment of pressure in propulsion main circuit
2-2. Measurement of propulsion charge pressure .
28, Measurement of parking brake release pressure -
2-4. Measurement of vibrator circuit pressure
25. Measurement and adjustment of vibrator charge pressure
2-6. Measurement and adjustment of steering circuit pressure
Adjustment of throttle linkage -
2-8. Adjustment of F-R lever linkage
Precautions for Use of Standard Value Chart
4) Values*in the chart @ machine leaves the factory. They should be
used for estimation of w operation and for guidance when the machine is
repaired,
2) Values in th
for fault find
the machine.
3) Values in the ci
Dus test results etc. They should be used for a guide
of the past repair frequency and operating record of
rt should not be used for the standard for claim application
>Precautions for Checking, Adjustment and Troubleshooting
For checking, adjustment and troubleshooting, park the machine on level ground and
secure with the safety pins engaged. i
A When working with other workers, use hand signals positively and keep people not
concerned away from the work area,
A Cool off the coolant or hydraulic fluid when remo
tank filler cap. Hot fluids can burn you.
A Do not put your hands close to parts in motion such as fan belts.
1g the radiator cap or the hydraulic