Professional Documents
Culture Documents
PF PV PDF
PF PV PDF
Piston Pumps
5127.02/EN/0999/A
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pump Model Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Control Model Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hydraulic characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Functional Symbol & Control Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Shaft Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Theoretical Bearing Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Performance characteristics of variable displacement pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
LR controls; characteristics and calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Performance Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Typical drain flow from an open-loop pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installation Dimensions
PF 066 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PF 090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PF 130 – 180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PF 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PV 066 – 250 Rear Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PV 066 – 250 Side Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Thru-Drive Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
SAE 4-Bolt Mounting Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Thru-drive Shaft Output Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installation data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Application Data
Case flushing requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Flushing flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Special fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Fluid Cleanliness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Ordering Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2
Introduction
3
Model Codes
...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Control Description
p PV Displacements
066 090 130 180 250
DF Pressure Compensated & Maximum Flow Adjuster
DP Proportional to Pilot Pressure
DQ Pressure Compensator – Over center – –
ES Displacement Control by Electric Motor
LR Constant Power Control
FE Displacement Control by Adjustment Control
HG Displacement Control by Handwheel Adjuster
SM Displacement Control by Servo Valve
SP Displacement Control by Electro–Hydraulic Proportional Valve
4
Model Codes
...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Example of DF model:
DF 1 F 090 R 1 N 1 10
5
Model Codes
...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
6
Pump Specifications
General
Model PF/PV 066 PF/PV 090 PF/ PV 130 PF/PV 180 PF/PV 250
Design Swash plate – Axial piston pump
Type of mounting Flange or foot-mounted, tandem version foot-mounting only
Pipe connection SAE flange B psi 11/2” - 3000 2” - 3000 21/2” - 3000 21/2” - 3000 31/2” - 500
A 1” - 6000 1” - 6000 1” - 6000 11/4” - 6000 11/4” - 6000
Direction of rotation Clockwise when viewing shaft end of pump.
Counterclockwise available on request.
Speed range nmin r/min 150
1800
nmax
Installation position Optional, see mounting information
Ambient temperature range min C (F) –20 (25)
max +50 (250)
Weight m3) kg (lbs.) 55 (121) 75 (165) 106 (234) 114 (251) 212 (467)
Hydraulic characteristics
Nominal pressure pN bar (psi) 350 (5000)
(100% duty cycle)
Input pressure p1min bar 0.85 abs 1 abs
p1min 50 50
Maximum pressure p2max bar (psi) 420 (6090)
to DIN 24312
Hydraulic fluid Hydraulic oil to DIN 51524 part 2, other fluids on request.
Hydraulic fluid temperature min C (F) –25 (7) (on startup)
range max + 90 (380)
Viscosity range for min cSt 10
continuous operation max 75
Max permissible start ν max cSt 1000
viscosity
Filtering 18/15/13
Drive
Maximum driving torque M1 Nm(lb.ft) 440 (325) 600 (443) 868 (640) 1202 (887) 1685 (1243)
(p2 max.,h = 100%)
Maximum power
consumption P1 kW (hp) 69 (93) 94 (126) 136 (182) 189 (254) 265 (355)
(p2 max. n=1500 rpm,
,h = 100%)
7
Functional Symbols
Electrical controls
PF Type ES electric motor displacement control
Fixed displacement
single pump
(shown with +V
thru-drive option)
A
M
B
L
PV
Open-loop variable Response time from 0 to +V
displacement single maximum displacement
pump (shown with
thru-drive option)
Type SM servo control with feedback
For applications needing moderately fast response.
+V
A
0 to + UE (IE) +
S B electric command signal
L
+V
A
PST
Hysteresis < 1%
+
B 0 to + UE (IE)
L (T) electric command signal
8
Hydraulic controls
Type DF1:
Single-side-of-center
pressure compensators
+Q
P
B L
Type DF2:
Pilot operated, manually
adjustable.
Recommended for +Q
systems having large
pressurized volumes.
A
P
B L
+Q
B L P
9
Functional Symbols
–Q
B L
Type DQA2,
Pilot operated, +Q
manually adjustable
B L –Q
Type DQB2
Without pilot valve (user to +Q
supply separately).
A
P
–Q
B L
PV pump example
10
DQ-2-V
Pressure compensator
with venting valve
+Q
A
P
–Q
B L
Type LR:
constant power control X
Excellent repeatability of set
power envelopes. Override T
pressure limiter available as
an option.
A
+Q
B L (T) p
Type FE:
Screw adjustment
Type HG:
Handwheel adjustment
0 to + Vmax
displacement
11
Type DF2-***-F-1-N-2 Compensator
The pressure compensator
with flow control maintains a
fixed pressure drop (standard
15 bar (218 psi) over a throttle
valve installed in the pump’s
output line, thereby
maintaining a constant flow to
the system independent of
load changes.
X1 T
X1
D2
+Q
D1
X2
D3
A p
B
L (T)
+Q
PSTA
10 20 30 40 bar
(150) (300) (435) (580) (psi)
B L
12
Performance Characteristics
Typical at 1500 r/min with anti-wear oil at 40 cSt (186 SUS)
Single displacement pumps: PF, PV
hp
Outlet Flow and Input Power kW 350 For calculation: Neff. = Ngeom. η overall
250
Volumetric and Overall Efficiencies
η vol.
300 η overall
l/min 100
% of max. displacement
USgpm 400 200
Swashplate angle as
PF/PV 250
100 250 100%
50%
Efficiency ( % )
Effective Output (Flow Rate)
60 150 50
200 100
PF/PV 130
40 100
PF/PV 90
100 50
20 PF/PV 066 50
0
0 100 200 300 400 bar
0 0 0
0 1000 2000 3000 4000 5000 5800 psi
0 100 200 300 400 bar
Pressure difference, outlet-inlet. Volumetric and
0 1000 3000 5000 5800 psi overall efficiencies vs. pressure difference outlet-inlet.
hp @ hp @
1800 kW @ 1500
r/min 1800 r/min kW @
25 1500
30 r/min r/min PV250
20 20
25 15
PV130/180
Power
20 15
15
10
15 PV066/90
10
10
10
5
5 5
5
0 0 0 0
0 100 200 300 bar
Pressure
0 1000 3000 5000 psi
13
Operating Data
Theoretical Bearing Life
At maximum displacement and various speeds.
1000 r/min
1000 r/min
1500 r/min 1500 r/min
1800 r/min 1800 r/min
104 104
3 x 103 3 x 103
bar 50 100 200 300 400 bar 50 100 200 300 400
psi 725 1450 2900 4350 5800 psi 725 1450 2900 4350 5800
Operating Pressure Operating Pressure
1000 r/min
1500 r/min 1000 r/min 1000 r/min
1500 r/min 1500 r/min
1800 r/min
1800 r/min 1800 r/min
104 104 104
psi 725 1450 2900 4350 5800 psi 725 1450 2900 4350 5800 psi 725 1450 2900 4350 5800
Operating Pressure Operating Pressure Operating Pressure
14
Performance characteristics of
variable displacement pumps
Pressure compensator response times Pressure compensator
100
Tu
Tu Tg Tg 50
Swashplate
yoke angle
0,9 Ss max.
Time 0
0 100 200 300 400 bar
Ss = Swashplate
∆p≤ 1 bar
Tu = Time lag from pressure change (14.5 psi)
to start of swashplate movement
Tg = Swashplate turning time 1000 2000 3000 4000 5000 5800 psi
Pressure
PV130/180
Response Time (ms)
PV066/90
50
100 PV–130/180
PV–066
0
0 100 200 300 400 bar 0
0 100 200 300 400 bar
0 2000 4000 6000 psi
0 2000 4000 6000 psi
15
LR controls; characteristics and calculations
Power/pressure characteristics
hp kW
40 30
35
25
30 22
20
25 18.5 250
Power
∆P
20 15
130/180
15 11
10
066/090
10 7.5
5
5 PV
0 0 Power dissipation at
0 100 200 300 bar
Example 1800 r/min
1000 2000 3000 4000 5000 psi 1500 r/min
Pressure
Performance Calculations
Where Metric Non-metric
Metric Non-metric
600 (P –∆ P) 1714 (P –∆ P)
Q= Q=
p2 p2
Example:
To find Qeff for P1 = 18,5 kW (24.80 hp) at p2 = 225 bar (3263 psi); n = 1500 r/min
Size 250 Pv = 11 kW (14.75 hp) P = 7,5 kW (10.05 hp)
16
Typical drain flow from an open-loop pump
based on 1500 r/min and 35 cSt 175 SUS viscosity
10
2.5 14
9
3.5
3
13
8
2.0 12
7 3.0
6
3 11
2
1.5 10
5 2.5
4
2 9
1.0 8
3 2.0 1
2
1 7
0.5
6
1 1.5
5
0 0
0 100 200 300 bar 4
1.0
3
0 1000 2000 3000 4000 5000 psi
0.5 2
Operating Pressure
1
0 0
0 100 200 300 bar
17
Installation Dimensions
PF 066
Dimensions mm (in)
Port A
154 1”, 6000psi
(6.06) A 27.8 (1.1)
L1
25 (.9)
ø 125h8
(4.9) M12–20deep
L5 57.2 (2.3)
ø 38 (1.5) k6 L2 B
10 ( .4) h9 15 (.6)
56 (2.2)
218 (8.6) Port B
367 (14.4) 1 1/2”, 3000psi
69.8 (2.7)
W40x1.25x 68 (2.7)
10aDIN 5480
M12x25deep
ø 38 (1.5)
35.7 (1.4)
26 (1.0)
94 (3.7)
126 (5.0)
80 ø 18 B
(3.1) L2
(.7)
Center bore
120 DM12 DIN332
(4.7) 4xM10
58 (2.3) –20deep
176 (7.0) 35 (1.4) 150 (5.9)
18
PF 090
Dimensions mm (in)
154 (6.06) Port A
A
L1 1”, 6000psi
27.8 (1.1)
ø 125h8
(4.9) 25 (.9)
L5
M12–20deep
ø 38 (1.5) k6 57.2 (2.3)
L2
10 ( .4) h9 B
15 (.6)
56 (2.2)
218 (8.6) Port B
367 (14.4) 1 1/2”, 3000psi
372 (14.6)
69.8 (2.7)
M12x25deep
ø 38 (1.5)
W40x1.25x 35.7 (1.4)
68 (2.7)
10aDIN 5480
26 (1.0)
94 (3.7)
126 (5.0)
19
PF 130 / 180
Dimensions mm (in)
35 (1.4)
Port B
A 50.8 (2.0)
M12–20deep
ø160 (6.3) h8 L1
B
ø 50 (2.0) k6 120 (4.7) 22 (.8) Port A
271 (10.7)
14 (0.5) h9 27.8 (1.1)
505 (19.9)
ø 25 (0.9)
78 (3.1)
Center
bore
82 (3.2) 4xM12
–20deep 200 (7.9)
150 (5.9)
40 (1.6) 185 (7.3) 265 (10.4)
20
PF 250
Dimensions mm (in)
A MA
L2 L1 L1.1
Port B
69.8 (2.7)
ø 88 (3.5)
ø200 (7.9) h6
164 (6.5) B
ø65 (2.6) k6 22 (.9)
341 (13.4) M16–32deep
18 (.7) h9
644 (24.5) 120.7 (4.8)
Port A
31.8 (1.2)
Center bore
DM20 DIN332 66.7 (2.65) ø 32 (1.3)
90 (3.5)
M14–24deep
W62x1.25x10a 80 (3.1)
DIN5480
21
Rear Ports – Pressure Compensator, DF1
Dimensions mm (in)
MA
L1
D2k6
D1
h8
L1
Pressure compensator,
direct operated L17
B11
B10 L1 D1 orifice B1
L2 inside B2
L9
L7 of the H9
control
L6 L1 D5 valve L1 L1
H1 D6
H8
D4 clock-
H2 +0.2 wise H5 H7
D3 0 H6 MA
B
+V A
max
L16 H3
H4
L10 L15
Center bore L2 M18x1,5
B7h9 DM12 DIN332 L8 D7 B4 B5
L5 –12deep
B3 B9
L4 L3
B6 B8
Pressure compensator,
direct operated
L11
L13
L12 D8
L14 D10
Control valve orifice D1
D9
D11
A B Outlet Port “A” Inlet Port “B”
6000 psi 3000/500 psi
L (T)
Pump SAE Inlet SAE Outlet L1 Two drain ports, one supplied plugged.
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation L2 M18 x 1,5 x 12 deep; supplementary
3000/500 6000 psi drain, or bleed plug. Must be drained in
to +Vmax CW B A
PV 066 11/2” 1” addition to L1 if the pump is installed with the
CCW A B shaft input end pointing up.
PV 090 2” 1”
to –Vmax CW A B MA G1/4” x 12,5 deep gauge port (supplied
PV 130 21/2” 1” plugged).
CCW B A
PV 180 21/2” 11/4”
PV 250 31/2” 11/4”
22
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11
h9
PV 066 210 116 160 40 40 180 10 116 58 147,8 172,8
(8.27) (4.57) (6.30) (1.57) (1.57) (7.09) (.39) (4.57) (2.28) (5.82) (6.80)
Model H1 H2 H3 H4 H5 H6 H7 H8 H9
+0.2
PV 066 227 162 90 41 93 53 88 139 47
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (1.85)
23
Rear Ports –
Pressure Compensator
with Load Sensing
Dimensions mm (in) MA
L1
D1 D2 k6
h8
L1
B11 B1
B10 B2
Pilot valve, second stage L17
Pressure compensator, Orifice
first stage L1 D1, D2
Flow valve L2 and D3 H9
L9
L7 inside X1
control X2
L6 L1 D5 valves L1 L1
H1
D6
clock H8
H2 D4 wise 0 H5 H7
D3 H6 B MA
+V L16
max A
H4 H3
+0.2 L10 L15
Center L8 L2M18x1,5 D7
B7 bore L5 –12deep B4 B5
h9 DM12 L4 L3
B3 B9
DIN332 B8
B6
Pressure X1 T
compensator, X1
first stage
L13 L11
Control valve orifice D2
Control valve orifice D1
X2
L14 D10 L12 D8
Flow valve
D9
Control valve orifice D3 D11
Outlet Port “A” Inlet Port “B”
B 6000 psi 3000/500 psi
A
L (T)
Pump SAE Inlet SAE Outlet X1 G1/4” x 12,5 deep; option for another
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation pilot valve.
3000/500 6000 psi X2 G1/4” x 12,5 deep; load sensing pilot
to +Vmax CW B A
PV 066 11/2” 1” port.
CCW A B L1 Two drain ports, one supplied plugged.
PV 090 2” 1”
to –Vmax CW A B L2 M18 x 1,5 x 12 deep; supplementary
PV 130 21/2” 1” drain, or bleed plug. Must be drained in
CCW B A
PV 180 21/2” 11/4” addition to L1 if the pump is installed with the
shaft input end pointing up.
PV 250 31/2” 11/4”
MA G1/4” x 12,5 deep gauge port (supplied
plugged).
24
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11
h9
PV 066 210 116 160 40 40 180 10 116 58 185 218
(8.27) (4.57) (6.30) (1.57) (1.57) (7.09) (.39) (4.57) (2.28) (7.28) (8.58)
Model H1 H2 H3 H4 H5 H6 H7 H8 H9
+0.2
PV 066 227 162 90 41 93 53 88 139 132
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (5.20)
25
Side Ports – Pressure Compensator, DF1
Dimensions mm (in)
MA
Outlet A
L1
D2k6
D1h8
L1
Inlet B
Orifice D1 and D2
Pressure compensator, inside control valve
direct operated
L1 L17 B4
L2 B2
B11 L18
B10 L9
Center bore H9
L7
DM16
L1
DIN332 L6
L1 L1 D5 L1 L1
H8
D6
MA
CW H4 +0,2 H5 H7
H1 D3 H6
B
H2
D4 D12 H3
L10
L16
B7h9 L8 L2 D7 L15 B9
B3 L5 B8
L4 L3 B5
B6 B12
B1
Pressure compensator,
direct operated L19
D10 L11
L14 L12 D8
Control valve orifice D1
D11
D9
A B L13 Inlet Port “B”
3000/500 psi
Outlet Port “A”
6000 psi
L (T)
Pump SAE Inlet SAE Outlet L1 Two drain ports, one supplied plugged.
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation L2 M18 x 1,5 x 12 deep; supplementary
3000/500 6000 psi drain, or bleed plug. Must be drained in
to +Vmax CW B A
PV 066 11/2” 1” addition to L1 if the pump is installed with the
CCW A B shaft input end pointing up.
PV 090 2” 1”
to –Vmax CW A B MA G1/4” x 12,5 deep gauge port (supplied
PV 130 21/2” 1” plugged).
CCW B A
PV 180 21/2” 11/4”
PV 250 31/2” 11/4”
26
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
h9
PV 066 210 116 160 235 130 176 10 116 58 147,8 172,8
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (5.82) (6.80) –
PV 090 210 116 160 235 130 180 10 116 58 147,8 172,8 157,5
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (5.82) (6.80) (6.20)
PV 130 260 140 200 265 224 224 14 140 70 147,8 172,8
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (5.82) (6.80) –
PV 180 260 140 200 265 224 224 14 140 70 147,8 172,8
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (5.82) (6.80) –
PV 250 325 175 250 330 280 280 18 175 87,5 151,3 172,8
(12.8) (6.89) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (5.96) (6.80) –
Model H1 H2 H3 H4 H5 H6 H7 H8 H9
+0.2
PV 066 227 162 90 41 93 53 88 139 47
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (1.85)
PV 180 160 50 M16 22 M10 M26 x 1,5 M12 x 20 62 M12 x 20 32 M14 x 20 M20
(6.30) (1.97) (.87) deep (2.44) deep (1.26) deep
PV 250 200 65 M20 26 M12 M33 x 2 M16 x 32 90 M16 x 32 32 M14 x 24 M24
(7.87) (2.56) (1.02) deep (3.54) deep (1.26) deep
Model L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19
PV 066 342 274 150 35 8 58 16 26 120 28 35,7 69,8 27,8 57,2 50 31 47,5 245,6 245,6
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (1.97) (.22) (1.87) (9.67) (9.67)
PV 090 342 274 150 35 8 58 16 26 120 28 42,9 77,8 27,8 57,2 50 31 47,5 245,6 245,6
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (1.97) (.22) (1.87) (9.67) (9.67)
PV 130 483 391 185 40 9 82 20 32 148 36 50,8 89 27,8 57,2 50 31 47,5 316 306
(19.0) (15.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (1.97) (.22) (1,87) (12.4) (12.0)
PV 180 483 391 185 40 9 82 20 32 148 36 50,8 89 31,8 66,7 50 31 47,5 316 306
(19.0) (15.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (1.97) (.22) (1.87) (12.4) (12.0)
PV 250 622 505 230 50 10 105 25 41 187 42 69,8 120,7 31,8 66,7 56 35 50,5 403 403
(24.5) (19.9) (9.06) (1.97) (.39) (4.13) (.98) (1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (2.20) (.38) (1.99) (15.9) (15.9)
27
Side Ports – Pressure Compensator MA
Outlet A
Dimensions mm (in)
L1
D2k6
D1h8
L1
Inlet B
Orifice D1 and D2
Pilot valve, second stage inside control valve
B11 Pressure compensator,
B10 first stage L1 L17 B4
L2 B2
L18
L9 X1
Center bore L7
DM16 H9
L1
DIN332 L6
L1 L1 D5 L1 L1 X1
H8
D6
MA
CW H4 +0,2 H5 H7
H1 D3 H6
B
H2
D4 D12 H3
L10
L16
B7h9 L8 L2 D7 L15 B9
B3 L5 B8
L4 L3 B5
B6 B12
B1
Pressure X1
compensator, D10 L11
first stage
L14 L12 D8
Control valve orifice D1
D11
D9
A B
L13 Inlet Port “B”
3000/500 psi
Outlet Port “A”
L (T) 6000 psi
Pump SAE Inlet SAE outlet X1 G1/4” x 12,5 deep; option for another
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation pilot valve.
3000/500 6000 psi L1 Two drain ports, one supplied plugged.
to +Vmax CW B A
PV 066 11/2” 1” L2 M18 x 1,5 x 12 deep; supplementary
CCW A B drain, or bleed plug. Must be drained in
PV 090 2” 1”
to –Vmax CW A B addition to L1 if the pump is installed with the
PV 130 21/2” 1” shaft input end pointing up.
CCW B A
PV 180 21/2” 11/4” MA G1/4” x 12,5 deep gauge port (supplied
plugged).
PV 250 31/2” 11/4”
28
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
h9
PV 066 210 116 160 235 130 176 10 116 58 185 218
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (7.28) (8.58) –
PV 090 210 116 160 235 130 180 10 116 58 185 218 157,5
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (7.28) (8.58) (6.20)
PV 130 260 140 200 265 224 224 14 140 70 185 218
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (7.28) (8.58) –
PV 180 260 140 200 265 224 224 14 140 70 185 218
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (7.28) (8.58) –
PV 250 325 175 250 330 280 280 18 175 87,5 185 218
(12.8) (6.89) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (7.28) (8.58) –
Model H1 H2 H3 H4 H5 H6 H7 H8 H9
+0.2
PV 066 227 162 90 41 93 53 88 139 91
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (3.58)
PV 180 160 50 M16 22 M10 M26 x 1,5 M12 x 20 62 M12 x 20 32 M14 x 20 M20
(6.30) (1.97) (.87) deep (2.44) deep (1.26) deep
PV 250 200 65 M20 26 M12 M33 x 2 M16 x 32 90 M16 x 32 32 M14 x 24 M24
(7.87) (2.56) (1.02) deep (3.54) deep (1.26) deep
Model L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19
PV 066 342 274 150 35 8 58 16 26 120 28 35,7 69,8 27,8 57,2 50 31 72,5 245,6 245,6
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (1.97) (.22) (2.85) (9.67) (9.67)
PV 090 342 274 150 35 8 58 16 26 120 28 42,9 77,8 27,8 57,2 50 31 72,5 245,6 245,6
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (1.97) (.22) (2.85) (9.67) (9.67)
PV 130 483 391 185 40 9 82 20 32 148 36 50,8 89 27,8 57,2 50 31 72,5 316 306
(19.0) (15.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (1.97) (.22) (2.85) (12.4) (12.0)
PV 180 483 391 185 40 9 82 20 32 148 36 50,8 89 31,8 66,7 50 31 72,5 316 306
(19.0) (15.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (1.97) (.22) (2.85) (12.4) (12.0)
PV 250 622 505 230 50 10 105 25 41 187 42 69,8 120,7 31,8 66,7 56 35 75,5 403 403
(24.5) (19.9) (9.06) (1.97) (.39) (4.13) (.98) (1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (2.20) (.38) (2.97) (15.9) (15.9)
29
Side Ports –Pressure Compensator with Load MA
Dimensions
Sensing mm (in) Outlet A
L1
D2k6
D1h8
L1
Inlet B
Pilot valve, second stage
Orifice D1, D2 and D3
Pressure compensator, inside control valves
B11 first stage
B10 B4
L1 L17 B2
Flow valve
L2
L18
L9
Center bore L7 H9
DM16 X1
L1
DIN332 L6
L1 L1 L1 L1
X2
D5 H8
D6 MA
CW H4 +0,2 H5 H7
H1 D3 H6
B
H2
D4 D12 H3
L10
L16
B7h9 L8 L2 D7 L15 B9
B3 L5 B8
L4 L3 B5
B6 B12
B1
Pressure X1 T L19
compensator, X1
first stage
Control valve orifice D2 D10 L11
Control valve orifice D1
X2
L14 L12 D8
Flow valve
D11
D9
Control valve orifice D3
L13 Inlet Port “B”
B 3000/500 psi
A Outlet Port “A”
6000 psi
L (T)
Pump SAE Inlet SAE Outlet X1 G1/4” x 12,5 deep; option for another
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation pilot valve.
3000/500 6000 psi X2 G1/4” x 12,5 deep; load sensing pilot
to +Vmax CW B A
PV 066 11/2” 1” port.
CCW A B L1 Two drain ports, one supplied plugged.
PV 090 2” 1”
to –Vmax CW A B L2 M18 x 1,5 x 12 deep; supplementary
PV 130 21/2” 1” drain, or bleed plug. Must be drained in
CCW B A
PV 180 21/2” 11/4” addition to L1 if the pump is installed with the
shaft input end pointing up.
PV 250 31/2” 11/4”
MA G1/4” x 12,5 deep gauge port (supplied
plugged).
30
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
h9
PV 066 210 116 160 235 130 176 10 116 58 185 218
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (7.28) (8.58) –
PV 090 210 116 160 235 130 180 10 116 58 185 218 157,5
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (7.28) (8.58) (6.20)
PV 130 260 140 200 265 224 224 14 140 70 185 218
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (7.28) (8.58) –
PV 180 260 140 200 265 224 224 14 140 70 185 218
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (7.28) (8.58) –
PV 250 325 175 250 330 280 280 18 175 87,5 185 218
(12.8) (6.89) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (7.28) (8.58) –
Model H1 H2 H3 H4 H5 H6 H7 H8 H9
+0.2
PV 066 227 162 90 41 93 53 88 139 132
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (5.20)
PV 180 160 50 M16 22 M10 M26 x 1,5 M12 x 20 62 M12 x 20 32 M14 x 20 M20
(6.30) (1.97) (.87) deep (2.44) deep (1.26) deep
PV 250 200 65 M20 26 M12 M33 x 2 M16 x 32 90 M16 x 32 32 M14 x 24 M24
(7.87) (2.56) (1.02) deep (3.54) deep (1.26) deep
Model L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19
PV 066 342 274 150 35 8 58 16 26 120 28 35,7 69,8 27,8 57,2 50 31 67,5 245,6 245,6
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (1.97) (.22) (2.66) (9.67) (9.67)
PV 090 342 274 150 35 8 58 16 26 120 28 42,9 77,8 27,8 57,2 50 31 67,5 245,6 245,6
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (1.97) (.22) (2.66) (9.67) (9.67)
PV 130 483 391 185 40 9 82 20 32 148 36 50,8 89 27,8 57,2 50 31 67,5 316 306
(19.0) (15.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (1.97) (.22) (2.66) (12.4) (12.0)
PV 180 483 391 185 40 9 82 20 32 148 36 50,8 89 31,8 66,7 50 31 67,5 316 306
(19.0) (15.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (1.97) (.22) (2.66) (12.4) (12.0)
PV 250 622 505 230 50 10 105 25 41 187 42 69,8 120,7 31,8 66,7 56 35 70,5 403 403
(24.5) (19.9) (9.06) (1.97) (.39) (4.13) (.98) (1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (2.20) (.38) (2.78) (15.9) (15.9)
31
Side Ports – Constant Power Control, LR
(with pressure limiter) MA
Outlet A
Dimensions mm (in)
L1
D2k6
D1h8
L1
Constant power control
Inlet B
Pump SAE Inlet SAE Outlet X1 G1/4” x 12,5 deep; option for another
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation pilot valve.
3000/500 6000 psi L1 Two drain ports, one supplied plugged.
to +Vmax CW B A
PV 066 11/2” 1” L2 M18 x 1,5 x 12 deep; supplementary
CCW A B drain, or bleed plug. Must be drained in
PV 090 2” 1”
to –Vmax CW A B addition to L1 if the pump is installed with the
PV 130 21/2” 1” shaft input end pointing up.
CCW B A
PV 180 21/2” 11/4” MA G1/4” x 12,5 deep gauge port (supplied
plugged).
PV 250 31/2” 11/4”
32
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
h9
PV 066 210 116 160 235 130 176 10 116 58 185 218
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (7.28) (8.58) –
PV 090 210 116 160 235 130 180 10 116 58 185 218 157,5
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (7.28) (8.58) (6.20)
PV 130 260 140 200 265 224 224 14 140 70 185 218
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (7.28) (8.58) –
PV 180 260 140 200 265 224 224 14 140 70 185 218
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (7.28) (8.58) –
PV 250 325 175 250 330 280 280 18 175 87,5 185 218
(12.8) (6.89) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (7.28) (8.58) –
Model H1 H2 H3 H4 H5 H6 H7 H8 H9
+0.2
PV 066 227 162 90 41 93 53 88 139 91
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (3.58)
PV 180 160 50 M16 22 M10 M26 x 1,5 M12 x 20 62 M12 x 32 M14 x M20 483 391
(6.30) (1.97) (.87) deep (2.44) 20 deep (1.26) 20 deep (19.0) (15.4)
PV 250 200 65 M20 26 M12 M33 x 2 M16 x 32 90 M16 x 32 M14 x M24 622 505
(7.87) (2.56) (1.02) deep (3.54) 32 deep (1.26) 24 deep (24.5) (19.9)
Model L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19 L20
PV 066 150 35 8 58 16 26 120 28 35,7 69,8 27,8 57,2 50 10 72,5 245,6 245,6 161
(5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (1.97) (.40) (2.85) (9.67) (9.67) (6.34)
PV 090 150 35 8 58 16 26 120 28 42,9 77,8 27,8 57,2 50 10 72,5 245,6 245,6 161
(5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (1.97) (.40) (2.85) (9.67) (9.67) (6.34)
PV 130 185 40 9 82 20 32 148 36 50,8 89 27,8 57,2 60 12 72,5 316 306 171
(7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (2.36) (.47) (2.85) (12.4) (12.0) (6.73)
PV 180 185 40 9 82 20 32 148 36 50,8 89 31,8 66,7 60 12 72,5 316 306 171
(7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (2.36) (.47) (2.85) (12.4) (12.0) (6.73)
PV 250 230 50 10 105 25 41 187 42 69,8 120,7 31,8 66,7 112 – 75,5 403 403 199,5
(9.06) (1.97) (.39) (4.13) (.98) (1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (4.41) (2.97) (15.9) (15.9) (7.85)
33
Side Ports – ES Control
Dimensions mm (in)
MA
Outlet port A
L1
D1h8
D2k6
L1
Inlet port B
B11 L1 L16 B4
B10 L2 L15 B2
L17
L9
L7
L6 D13
L1
L1
D5 H8
L10 D6
H6
H4 +0,2 L1 CW H1 H5 L1
D3 H7
B MA
H2
D4 D12
H3
L8 L2 B9
B7h9 D7
B3 B8
L5 B5
B6
L4 L3
B1 B12
D10 L11
L14 L12 D8
D11
D9
L13 Inlet Port “B”
3000/500 psi
Outlet Port “A”
6000 psi
Pump SAE Inlet SAE Outlet L1 Two drain ports, one supplied plugged.
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation L2 M18 x 1,5 x 12 deep; supplementary
3000/500 6000 psi drain, or bleed plug. Must be drained in
to +Vmax CW B A
PV 066 11/2” 1” addition to L1 if the pump is installed with the
CCW A B shaft input end pointing up.
PV 090 2” 1”
to –Vmax CW A B MA G1/4” x 12,5 deep gauge port (supplied
PV 130 21/2” 1” plugged).
CCW B A
PV 180 21/2” 11/4”
PV 250 31/2” 11/4”
34
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
h9
PV 066 210 116 160 235 130 176 10 116 58 276,5 334,5
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (10.9) (13.2) –
PV 090 210 116 160 235 130 180 10 116 58 276,5 334,5 157,5
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (10.9) (13.2) (6.20)
PV 130 260 140 200 265 224 224 14 140 70 288,5 368,5
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (11.4) (14.5) –
PV 180 260 140 200 265 224 224 14 140 70 288,5 368,5
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (11.4) (14.5) –
PV 250 325 180 250 330 280 280 18 175 87,5 332,7 434,7
(12.8) (7.09) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (13.1) (17.1) –
Model H1 H2 H3 H4 H5 H6 H7 H8
+0.2
PV 066 227 162 90 41 93 53 122 168
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (4.80) (6.61)
PV 180 160 50 M16 22 M10 M26 x 1,5 M12 x 62 M12 x 32 M14 x M20 110,5
(6.30) (1.97) (.87) 20 deep (2.44) 20 deep (1.26) 20 deep (4.35)
PV 250 200 65 M20 26 M12 M33 x 2 M16 x 90 M16 x 32 M14 x M24 123
(7.87) (2.56) (1.02) 32 deep (3.54) 32 deep (1.26) 24 deep (4.84)
Model L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18
342 274 150 35 8 58 16 26 120 28 35,7 69,8 27,8 57,2 78 153,5 245,6 245,6
PV 066
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (3.07) (6.04) (9.67) (9.67)
342 274 150 35 8 58 16 26 120 28 42,9 77,8 27,8 57,2 78 153,5 245,6 245,6
PV 090
(13.5) (10.8) (5.91) (1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (3.07) (6.04) (9.67) (9.67)
483 391 185 40 9 82 20 32 148 36 50,8 89 27,8 57,2 100 175,5 316 306
PV 130
(19.0) (13.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (3.94) (6.91) (12.4) (12.0)
483 391 185 40 9 82 20 32 148 36 50,8 89 31,8 66,7 100 175,5 316 306
PV 180
(19.0) (13.4) (7.28) (1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (3.94) (6.91) (12.4) (12.0)
622 505 230 50 10 105 25 41 187 42 69,8 120,7 31,8 66,7 88 163,5 403 403
PV 250
(24.5) (19.9) (9.06) (1.97) (.39) (4.13) (.98) (1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (3.46) (6.44) (15.9) (15.9)
35
MA
Side Ports – DP Control Outlet port A
Dimensions mm (in) L1 T
PSt1
D1h8
D2k6
L1
Inlet port B
L15 CETOP3 NG6
L1 L16
DIN24340
B11
L2 B4
B10 B2
Proportional L22 L17
valve L18
Pressure L9 PSt1 H9
L7
limiter L1 T
L6
L1 L1 D5 L1
H8 H6 MA
H4 +0,2 CW D6
H5 H7
H1 D3 D13
PSt
B
H2 H10 H3
D4 L10 D12
B7h9 L8 L2 D7 L20 B9
B3 M18x1,5-12 deep
Control pump B8
L5 L21
B5
B6 L4 L3
B12
B1 Center bore DM16 DIN332
36
Model B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12
h9
PV 066 210 116 160 235 130 176 10 116 58 52 182,5
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (2.05) (7.19) –
PV 090 210 116 160 235 130 180 10 116 58 52 182,5 157,5
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (2.05) (7.19) (6.20)
PV 250 325 175 250 330 280 280 18 175 87,5 52 182,5
(12.8) (6.89) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (2.05) (7.19) –
PV 130 283 207 113 53,5 117 64 110 170 127 97 131 160 50 M16 22
(11.1) (8.15) (4.45) (2.11) (4.61) (2.52) (4.33) (6.69) (5.00) (3.82) (5.16) (6.30) (1.97) (.87)
PV 180 283 207 113 53,5 117 64 110 170 127 97 131 160 50 M16 22
(11.1) (8.15) (4.45) (2.11) (4.61) (2.52) (4.33) (6.69) (5.00) (3.82) (5.16) (6.30) (1.97) (.87)
PV 250 354 260 140 69 146 77 138 214 127 124 167 200 65 M20 26
(13.9) (10.2) (5.51) (2.72) (5.75) (3.03) (5.43) (8.43) (5.00) (4.88) (6.57) (7.87) (2.56) (1.02)
Model L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19 L20 L21 L22
16 26 120 28 35,7 69,8 27,8 57,2 267 104 46 245,6 245,6 73,5 122,6 230,6
PV 066
(.63) (1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (10.5) (4.09) (1.81) (9.67) (9.67) (2.89) (4.83) (9.08)
16 26 120 28 42,9 77,8 27,8 57,2 267 104 46 245,6 245,6 73,5 122,6 230,6
PV 090
(.63) (1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (10.5) (4.09) (1.81) (9.67) (9.67) (2.89) (4.83) (9.08)
20 32 148 36 50,8 89 27,8 57,2 342 128 46 316 306 73,5 122,6 336
PV 130
(.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (13.5) (5.03) (1.81) (12.4) (12.0) (2.89) (4.83) (13.2)
20 32 148 36 50,8 89 31,8 66,7 342 128 46 316 306 73,5 122,6 336
PV 180
(.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (13.5) (5.03) (1.81) (12.4) (12.0) (2.89) (4.83) (13.2)
25 41 187 42 69,8 120,7 31,8 66,7 387 150 46 403 403 73,5 122,6 437
PV 250
(.98) (1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (15.2) (5.91) (1.81) (15.9) (15.9) (2.89) (4.83) (17.2)
37
Side Ports – SP Control MA
Outlet port A
Dimensions mm (in)
L1
D2k6
D1h8
L1
B12
Inlet port B
B11 L15
B10
L17 B4
L1 L16 B2
Proportional L2
valve L18
Pressure L9
limiter L7 H9
L6 PSt1
L1 L1
L1 L1 D5
D6
L22 H11 MA
CW
H1 H8 H6
H4 +0,2 H5 L23 H7
D3
B
PSt2
H2 H10 H3
D4 L10
D12
B7h9 L8 L2 D7 L20 B9
L5 Control B8
B3 L21
pump B5
B6 L4 L3 B13
B1 Center bore DM16 DIN332
L19
D11
D9
L13 Inlet Port “B”
Outlet Port “A” 3000/500 psi
6000 psi
B L(T)
Pump SAE Inlet SAE Outlet SSt G3/4” Control pump inlet port.
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation PSt1 G1/2” Control pressure port.
3000/500 6000 PSt2 G3/8” Control pressure port.
to +Vmax CW B A
PV 066 11/2” 1” L1 Two drain ports, one supplied plugged.
CCW A B L2 M18 x 1,5 x 12 deep; supplementary
PV 090 2” 1”
to –Vmax CW A B drain, or bleed plug. Must be drained in
PV 130 21/2” 1”
addition to L1 if the pump is installed with the
CCW B A
PV 180 21/2” 11/4” shaft input end pointing up.
MA G1/4” x 12,5 deep gauge port (supplied
PV 250 31/2” 11/4”
plugged).
38
Model B7
B1 B2 B3 B4 B5 B6 B8 B9 B10 B11 B12 B13
h9
PV 066 210 116 160 235 130 176 10 116 58 45 224,4 165
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (1.77) (8.83) – (6.50)
PV 090 210 116 160 235 130 180 10 116 58 45 224,4 157,5 165
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (1.77) (8.83) (6.20) (6.50)
PV 130 260 140 200 265 224 224 14 140 70 45 224,4 190
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (1.77) (8.83) – (7.48)
PV 180 260 140 200 265 224 224 14 140 70 45 224,4 190
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (1.77) (8.83) – (7.48)
PV 250 325 175 250 330 280 280 18 175 87,5 67,4 224,4 221
(12.8) (6.89) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (2.65) (8.83) – (8.70)
Model D1 D2
H1 H2 H3 H4 +0.2 H5 H6 H7 H8 H9 H10 H11 D3 D4
h8 k6
PV 066 227 162 90 41 93 53 88 139 125 97 113 125 38 18
M12
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (4.92) (3.82) (4.45) (4.92) (1.50) (.71)
PV 090 227 162 90 41 93 53 88 139 125 97 113 125 38 18
M12
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (5.47) (4.92) (3.82) (4.45) (4.92) (1.50) (.71)
PV 130 283 207 113 53,5 117 64 110 174 125 97 131 160 50 22
M16
(11.1) (8.15) (4.45) (2.11) (4.61) (2.52) (4.33) (6.85) (4.92) (3.82) (5.16) (6.30) (1.97) (.87)
PV 180 283 207 113 53,5 117 64 110 174 125 97 131 160 50 22
M16
(11.1) (8.15) (4.45) (2.11) (4.61) (2.52) (4.33) (6.85) (4.92) (3.82) (5.16) (6.30) (1.97) (.87)
PV 250 354 260 140 69 146 77 138 217 125 124 167 200 65 26
M20
(13.9) (10.2) (5.51) (2.72) (5.75) (3.03) (5.43) (8.54) (4.92) (4.88) (6.57) (7.87) (2.56) (1.02)
Model L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19 L20 L21 L22 L23
26 120 28 35,7 69,8 27,8 57,2 50 10 46 245,6 245,6 73,5 122,6 14,5 31
PV 066
(1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (1.97) (.39) (1.81) (9.67) (9.67) (2.89) (4.83) (.57) (.22)
26 120 28 42,9 77,8 27,8 57,2 50 10 46 245,6 245,6 73,5 122,6 14,5 31
PV 090
(1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (1.97) (.39) (1.81) (9.67) (9.67) (2.89) (4.83) (.57) (1.22)
32 148 36 50,8 89 27,8 57,2 50 10 46 316 306 73,5 122,6 14,5 31
PV 130
(1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (1.97) (.39) (1.81) (12.4) (12.0) (2.89) (4.83) (.57) (1.22)
32 148 36 50,8 89 31,8 66,7 50 12 46 316 306 73,5 122,6 14,5 31
PV 180
(1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (1.97) (.47) (1.81) (12.4) (12.0) (2.89) (4.83) (.57) (1.22)
41 187 42 69,8 120,7 31,8 66,7 56 46 403 403 73,5 122,6 14,5 35
PV 250
(1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (2.20) – (1.81) (15.9) (15.9) (2.89) (4.83) (.57) (1.38)
39
Side Ports – SM Control
Dimensions mm (in)
MA
Outlet port A
L1
D2k6
D1h8
B12
L1
Inlet port B
L1
L2 L15
B13 Servo B4
B11 L18 control B14
B10 B2
L9
H9 PSt1
L7
H11 L6
L1
L1 H8 MA
D6
H1 H6
H4 +0,2 CW H5 H7 H12
D3
PSt2
B
H2 D4 H10 H3
L10 D12
B7h9 L8 L2 D7 L16 B9
B3 L5 M18x1,5-12 deep L17 Control pump
B8
B6 L4 L3
B5
B1 Center bore DM16 DIN332
L19
MA A
L11
SSt D10
PSt
L14 L12 D8
D11
D9
L13 Inlet Port “B”
Outlet Port “A” 3000/500 psi
6000 psi
B L(T)
Pump SAE Inlet SAE Outlet SStG3/4” Control pump inlet port.
Control Direction Inlet Outlet
Flange “B” Flange “A” of rotation PSt1G1/2” Control pressure port.
3000/500 6000 PSt2 G3/8” Control pressure port.
to +Vmax CW B A
PV 066 11/2” 1” L1 Two drain ports, one supplied plugged.
CCW A B L2 M18 x 1,5 x 12 deep; supplementary
PV 090 2” 1”
to –Vmax CW A B drain, or bleed plug. Must be drained in
PV 130 21/2” 1”
addition to L1 if the pump is installed with the
CCW B A
PV 180 21/2” 11/4” shaft input end pointing up.
MA G1/4” x 12,5 deep gauge port (supplied
PV 250 31/2” 11/4”
plugged).
40
Model B7
B1 B2 B3 B4 B5 B6 B8 B9 B10 B11 B12 B13 B14
h9
PV 066 210 116 160 235 130 176 10 116 58 19 113,5 158 100
(8.27) (4.57) (6.30) (9.25) (5.12) (6.93) (.39) (4.57) (2.28) (.75) (4.47) – (6.22) (3.94)
PV 090 210 116 160 235 130 180 10 116 58 19 113,5 157,5 158 100
(8.27) (4.57) (6.30) (9.25) (5.12) (7.09) (.39) (4.57) (2.28) (.75) (4.47) (6.20) (6.22) (3.94)
PV 130 260 140 200 265 224 224 14 140 70 19 113,5 160 100
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (.75) (4.47) – (6.30) (3.94)
PV 180 260 140 200 265 224 224 14 140 70 19 113,5 160 100
(10.2) (5.51) (7.87) (10.4) (8.82) (8.82) (.55) (5.51) (2.76) (.75) (4.47) – (6.30) (3.94)
PV 250 325 175 250 330 280 280 18 175 87,5 19 113,5 178 100
(12.8) (6.89) (9.84) (13.0) (11.0) (11.0) (.71) (6.89) (3.44) (.75) (4.47) – (7.00) (3.94)
Model H4
H1 H2 H3 H5 H6 H7 H8 H9 H10 H11 H12
+0.2
PV 066 227 162 90 41 93 53 88 154,5 65,5 97 315,5 88
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (6.08) (2.58) (3.82) (12.4) (3.46)
PV 090 227 162 90 41 93 53 88 154,5 65,5 97 315,5 88
(8.94) (6.38) (3.54) (1.61) (3.66) (2.09) (3.46) (6.08) (2.58) (3.82) (12.4) (3.46)
PV 130 283 207 113 53,5 117 64 110 199,5 65,5 97 383,5 110
(11.1) (8.15) (4.45) (2.11) (4.61) (2.52) (4.33) (7.85) (2.58)1 (3.82) (15.1) (4.33)
PV 180 283 207 113 53,5 117 64 110 199,5 65,5 97 383,5 110
(11.1) (8.15) (4.45) (2.11) (4.61) (2.52) (4.33) (7.85) (2.58) (3.82) (15.1) (4.33)
PV 250 354 260 140 69 146 77 138 256,5 65,5 124 467 138
(13.9) (10.2) (5.51) (2.72) (5.75) (3.03) (5.43) (10.1) (2.58) (4.88) (18.4) (5.43)
Model D1 D2
D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 L1 L2 L3
h8 k6
PV 066 125 38 18 M10 x 24 38 M12 x 24 25 M12 x 21 342 274 150
M12 M8 M22 x 1,5 –
(4.92) (1.50) (.71) deep (1.50) deep (.98) deep (13.5) (10.8) (5.91)
PV 090 125 38 18 M10 x 20 50 M12 x 24 25 M12 x 21 342 274 150
M12 M8 M22 x 1,5 –
(4.92) (1.50) (.71) deep (1.97) deep (.98) deep (13.5) (10.8) (5.91)
PV 130 160 50 22 M12 x 20 62 M12 x 20 25 M12 x 20 483 341 185
M16 M10 M26 x 1,5 M20
(6.30) (1.97) (.87) deep (2.44) deep (.98) deep (19.0) (13.4) (7.28)
Model L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L19
35 8 58 16 26 120 28 35,7 69,8 27,8 57,2 163 73,5 122,6 245,6 245,6
PV 066
(1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.41) (2.75) (1.09) (2.25) (6.42) (2.89) (4.83) (9.67) (9.67)
35 8 58 16 26 120 28 42,9 77,8 27,8 57,2 163 73,5 122,6 245,6 245,6
PV 090
(1.38) (.31) (2.28) (.63) (1.02) (4.72) (1.10) (1.69) (3.06) (1.09) (2.25) (6.42) (2.89) (4.83) (9.67) (9.67)
40 9 82 20 32 148 36 50,8 89 27,8 57,2 175 73,5 122,6 316 306
PV 130
(1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.09) (2.25) (6.89) (2.89) (4.83) (12.4) (12.0)
40 9 82 20 32 148 36 50,8 89 31,8 66,7 175 73,5 122,6 316 306
PV 180
(1.57) (.35) (3.23) (.79) (1.26) (5.83) (1.42) (2.00) (3.50) (1.25) (2.63) (6.89) (2.89) (4.83) (12.4) (12.0)
50 10 105 25 41 187 42 69,8 120,7 31,8 66,7 204 73,5 122,6 403 403
PV 250
(1.97) (.39) (4.13) (.98) (1.61) (7.36) (1.65) (2.75) (4.75) (1.25) (2.63) (8.03) (2.89) (4.83) (15.9) (15.9)
41
Thru-Drive Mounting Dimensions
H
102 82,58 +0,03
(4.02) ∅
(3.25)
106,4
(4.19) 10 (.39) O-ring supplied with pump
130 M10-20 deep L1
(5.12)
L3
PV 130/180/250-P-*-*-5
SAE “A” L2
22 (.87)
H
126 82,58 +0,03
∅
(4.96) (3.25)
PV 130/180/250-P-*-*-4 33 (1.30)
SAE “B”
D2 D1
89,8 101,6 H7
∅ (4.00)
(3.54)
42
SAE 4-Bolt Mounting Pads
A 38 50 62 90 25 32 max
C ∅A
B 35,7 42,9 50,8 69,8 27,8 31,8
Installation data
Installation position is optional, however, Therefore, the drain line has to be Installatio Drain piping
note bearing lubrication with respect to installed in such a way as to allow n position
mounting position. hydraulic fluid to be drawn from the
reservoir tank. For this to happen: Shaft up
The operation of all sizes of “PV pumps”
– the drain pipe must terminate below L2
in a open circuit with the following
conditions: the reservoir oil level.
– pump in flow position up to Qmax. – a check valve in the drain line is L1
– p1 < 2 bar (30 psi) abs. not allowed.
– p2 < 25 bar (360 psi) – if a check valve is required and
0,2 bar (3 psi)
For example: Circulation with no cannot be avoided, the case must check
pressure may cause a reverse of the be flushed by an external flow of 5
to 10 l/min (1.32 to 2.64 USgpm) Shaft
drain flow. Hydraulic fluid will be drawn down L3
from the case through the
decompression bore of the valve plate
into the cylinder. Operating the pumps in L1
this condition will risk dry running the
bearings resulting in damage.
0,2 bar (3 psi)
check
43
Application Data
Case flushing requirements Pressure and flow ratings of hydraulic Vickers pumps, as with any variable
components generally have to be reduced displacement piston pumps, will operate
Case flushing is not necessary for open when alternative fluids are used. with apparent satisfaction in fluids up to
loop pumps with DR or LR controls. the rating specified here. Experience
Because hydraulic pumps depend on has shown, however, that pump and
A check valve must not be used in the the pumping fluid for dynamic hydraulic system life is not optimized
drain pipe. The drain pipe must terminate lubrication, it is necessary to alter the with high fluid contamination levels (high
below the oil level in the reservoir. ratings in order to retain the durability ISO cleanliness codes).
and operating life that is expected in
Case flushing is not necessary for open today’s hydraulic systems.
loop pumps with DF controls if flushing Proper fluid condition is essential for
or return oil is drained via the case. These pumps will provide exceptional life long and satisfactory life of hydraulic
when used with a good quality clean fluid components and systems. Hydraulic
For all other conditions with low pressure at the pump ratings specified for that fluid. fluid must have the correct balance of
<20 bar (<300 psi) and low flow (<10% of cleanliness, materials, and additives for
Qmax) case flushing is required. Fluid maintenance is critical to the protection against wear of components,
durability of all hydraulic components,
For operation with special fluids HFB elevated viscosity, and inclusion of air.
and particularly so woth hydraulic
and HFC, case flushing is required. pumps. This becomes even more of a
Essential information on the correct
Flushing flow factor when alternative fluids are used.
methods for treating hydraulic fluid is
All types of alternative fluids require
Flushing flow via the pump case should be extensive maintenance in order to included in Vickers publication 561 –
>1% of maximum pump flow. Maximum maintain proper levels of water content, “Vickers Guide to Systemic
flushing flow depends on case pressure. acidity, viscosity and contamination. Contamination Control” – available from
Fluids your local Vickers distributor. In this
Fluid Cleanliness publication, filtration and cleanliness
Pumps in this catalog are primarily These pumps are rated for anti-wear levels for extending the life of axial
designed to operate with conventional petroleum fluids with a contamination piston pumps and other system
petroleum based hydraulic oil. level of 18/15/13 (Vickers) or ISO 18/14. components are listed. Included is an
Alternative fluids and restrictions: Operation in fluids with levels more
excellent discussion of the selection of
contaminated than this is not
NOTE: recommended. Fluids other than products needed to control fluid condition.
1. All maximum speed figures are based petroleum, severe service cycles, or Ordering procedure
on atmospheric pressure (1.0 bar temperature extremes are cause for
adjustment of these codes. Please When ordering please specify full model
absolute) at pump inlet. This requires designations of items required; see
an overhead reservoir. contact your Vickers representative for
specific duty cycle recommendations. ”Model codes” section of this catalog.
2. All listed ratings are based on the use
of a good quality fluid. Note the following:
– Designations of variable displacement
3. Alternative fluids have a reduced pumps must include the
tolerance for contamination over supplementary designation of the
petroleum base fluids. Good filtration
is therefore critical. required control type.
44