5. Brief profile of the faculty/panelists: V.L.Patankar(Director, IAHE), Umesh
Rajeshirke(Managing Director, Spectrum Techno Consultants Pvt Ltd), V.N.Heggade(Sr Vice president, Gammon India Ltd), T. Viswanathan, Alok Bhowmick(Managing Director, B & S Engineering Consultant Pvt Ltd), Vinay Gupta(Chief Executive Officer, Tandon Consultants Pvt Ltd), Dr. A.K. Mullick(Former Director General, NCBM)
6. Major topics covered:
1. Basis of Design, material properties and their design values. 2. Analysis & ultimate limit state of induced deformation 3. Ultimate limit state of two and three dimensional elements for out of plane and in- Plane loading effects & Concrete shell elements. 4. Action & their combinations. 5. Ultimate limit state of shear, punching shear and torsion. 6. Ultimate limit state of linear elements for bending and axial forces. 7. Pre-stressing systems. 8. Detailing requirements including ductility detailing. 9. Serviceability limits state. 10. Durability and deterioration of concrete. 11. Quality control. 7. Lessons learnt: a) Design of concrete bridges as per IRC 112. b) Theories and derivation of equations of the code.
8. Applicability /relevance of the lessons learnt in the context of ICT: It is applicable