Professional Documents
Culture Documents
Machine Tools Questions For Mid1
Machine Tools Questions For Mid1
**QUESTIONSSTART**
**NEXTQUESTION**
Explain the differences between orthogonal cutting and oblique cutting with neat sketch.
**NEXTQUESTION**
With neat sketch explain the principle angles of single point cutting tool and other
parameters associated with it.
**NEXTQUESTION**
What is the chip? Explain the chip formation mechanism & various types of chips
produced during machining?
**NEXTQUESTION**
With the help of neat sketch, derive the expressions for cutting forces using Merchant’s
circle diagram.
**NEXTQUESTION**
What are the common methods of chip breaking and what are the means used for the
same?
**ENDOFQUESTIONS**
**SECONDUNIT**
**QUESTIONSSTART**
With a neat sketch explain the principle of working and basic parts of a Lathe.
**NEXTQUESTION**
With a block diagram, discuss about the different types of taper turning methods.
**NEXTQUESTION**
With neat sketch explain various work holding & tool holding devices used on a lathe
machine.
**NEXTQUESTION**
**NEXTQUESTION**
**NEXTQUESTION**
Name the different types of the lathes available in machine shop? Describe the working of a
centre lathe.
**ENDOFQUESTIONS**
**COMMONFIRSTSECONDUNIT**
**QUESTIONSSTART**
a. Define tool life? And write the relation among tool life, cutting speed, depth of cut and
feed.
e. What are the tool post devices used in capstan and turret lathe.
**NEXTQUESTION**
**NEXTQUESTION**
a. Write the velocity relationships in metal cutting.
**NEXTQUESTION**
**ENDOFQUESTIONS**