SMART Important things to note
In some cases, worn locks may read between the scale lines, if this is the case |
find it better to cut the key to the higher cut and progress down if necessary.
| always run the numbers | get through Instacode to see if itis a genuine code.
‘Sometimes if the lock has been replaced, it may be an after market (non genuine)
and therefore may not even be a legitimate code.
Itis@ good idea to draw yourself 1)2/3/4|)5|/6/7/8
arid similar to the ones shown, as Sn in ages | |
this will make it much easier to A |
write down the numbers as you |
decode the lock.
}1/2|3/4/5/6)]7]|8 |9 |10
a | =
Most of the time the "TOP" of the key blade is Axis
BUT sometimes it is shown in Instacode as Axis "8
The top of the Key blade can also be shown as "Left"
‘Spacing numbers are always taken from the shoulder end
DEFT RIGHT
of the key (bow) and this is always "number 1" position
If you find a mistake or have a constructive comment or criticism, please do not
hesitate to contact me at:
OR, ifyou have a particular lock you would like to be added, please let me know and
I will do my best to add it to the next Volume.