Professional Documents
Culture Documents
BALINIT® LATUMA also means: No performance losses after coating – and you save considerably on costs. We would
reconditioning. Even after multiple recoating operations, you be pleased to provide you with information on our recon-
still benefit from the same high performance as after initial ditioning services.
BALINIT LATUMA
Amount of machined material, 100%
Versatility wins
First-class performance in milling,
+ + + drilling and turning
+ + +
1 new tool
4 new tools Reconditioned 3 times
100% 50%
total costs cost savings
Iramali 18
9496 Balzers
Liechtenstein
T +423 388 7500
F +423 388 5419
E info.balzers@oerlikon.com
Cutting Tools
BALINIT LATUMA Convincing results with the use of BALINIT LATUMA
Make your machining operations a model for success coatings on indexable inserts and end mills
Tool manufacturers, mechanical engineering, the aircraft process reliability under difficult working conditions is also
Face milling in steel, dry Turning in stainless steel,
industry and reconditioners can look forward to even increased at the same time. Employ this coating solution wet and dry
more versatility and performance. With BALINIT® LATUMA, for indexable inserts and shank-type tools – take your
developed on the basis of the BALINIT® coatings FUTURA metal processing business to new levels of success with Tool life [m] Relative tool life [%] wet
NANO and X.CEED, it offers you decisive advantages. BALINIT® LATUMA. Oerlikon Balzers, a global technology dry
4.5 200
Not only is the machining and use of a wide variety of leader in hard coatings, helps you on the way.
4.0
challenging materials even more productive now, the 3.5 150
3.0
2.5
100
1.5
50
1.0
0.5
0.0 0
Optimized thermal shock resistance Ideal for wet and dry machining
Milling in hot-working steel Drilling in steel
High cutting speeds and feed rates Enhanced productivity Tool life [m] Relative tool life [%]
250 200
50
50
Milling and turning with Milling with carbide Drilling with carbide Tool Carbide end mill, Ø 10 mm Carbide drill, Ø 6,0 mm
indexable inserts and HSS end mills and HSS drills
Workpiece Steel 1.2344 Steel 1.0503
(AISI H13, SKD61), 45 HRC (AISI
® 1045, S45C)
Lorem ipsum dolor sit amet BALINIT ALCRONA PRO
Milling in Milling in Drilling in
Cutting data vc = 180 m/min vc = 80 m/min
- Stainless steel, HRSA - Stainless steel, HRSA - Stainless steel, HRSA ft = 0.1 mm/rev ft = 0.25 mm/rev
- Cast iron - Cast iron - Cast iron ap = 10 mm LD = 4xD
- Steel - Difficult-to-machine tool steels - Difficult-to-machine tool steels ae = 0.5 mm VB = 0.15 mm
VB = 0.10 mm
Turning in and high-alloy steels and high-alloy steels
Emulsion Emulsion
- Stainless steel for finishing - High-strength, hardened steels - High-strength, hardened steels
operations Source Oerlikon Balzers cutting laboratory Tool manufacturer