Professional Documents
Culture Documents
Folding Bike Instruction Booklet PDF
Folding Bike Instruction Booklet PDF
Handlepost
Frame latch
Pedals
Cranks
Step 1
Press down the circular stopper
on the handlepost latch
Step 2
Pull the handlepost latch out to
unlock the handlepost
Step 3
Swing the handlepost into the
folded position: to the left side of
the frame and flush against the
front wheel
Step 4
Push the pedals towards the
frame to fold them in
Step 5
Pull the frame latch to unlock the
frame
Step 6
When folding the frame ensure
that the left pedal crank is pushed
towards the ground
Step 7
Swing the front half of the frame
back and turn the front wheel to
the right
Step 8
Front and back wheel are now in
the parallel position
Step 9
Take the bag off the rear rack (it is
secured with clips and velcro)
Step 10
Open the quick release latch and
push the seat down
Ready to carry!
There are no latches to hold the
bike in the folded position
Step 1
Open the quick release latch and
pull the seat post up
Step 2
Unfold the frame
Step 3
Open the frame latch so that the
two halfs of the frame can be
fitted together
Step 4
Swing the handlepost up to its
vertical position
Step 5
Close the handlepost latch to
secure the handlepost in postition
Step 6
Secure the bag to the rear rack
with the velcro and clips
Step 7
Pull the pedals into position
Ready to cycle!
Before each ride, check to
make sure the frame latch and
handlepost latch are secure