Professional Documents
Culture Documents
KVR13N9S6 2 PDF
KVR13N9S6 2 PDF
KVR13N9S6/2
2GB 1Rx16 256M x 64-Bit PC3-10600
CL9 240-Pin DIMM
DESCRIPTION SPECIFICATIONS
This document describes ValueRAM's 256M x 64-bit (2GB) CL(IDD) 9 cycles
DDR3-1333 CL9 SDRAM (Synchronous DRAM) 1Rx16, memory Row Cycle Time (tRCmin) 49.125ns (min.)
module, based on four 256M x 16-bit FBGA components. The Refresh to Active/Refresh 260ns (min.)
SPD is programmed to JEDEC standard latency DDR3-1333 Command Time (tRFCmin)
timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact Row Active Time (tRASmin) 36ns (min.)
fingers. The electrical and mechanical specifications are as Maximum Operating Power 1.050 W*
follows:
UL Rating 94 V - 0
Operating Temperature 0o C to 85o C
FEATURES Storage Temperature -55o C to +100o C
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply *Power will vary depending on the SDRAM used.
• 8-bit pre-fetch
• Asynchronous Reset
Continued >>
133.35
Units: millimeters ± 0.15
30.00
± 0.15
18.80
± 0.15
15.80 ± 0.15
11.00 ± 0.15
8.00
± 0.15
0.00
0.00
54.70
± 0.15