Professional Documents
Culture Documents
Wipers
PEEK -70°C to 260°C
Hytrel® -54°C to 149°C
Nitrile -40°C to 120°C
DT D DS DX AN
Product Description:
Wipers are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act
as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/
or the damage of other sealing components. A properly selected wiper could help reduce the need for unscheduled
maintenance and even increase the time between maintenance cycles.
It is important to determine the correct style and material for your application. Hi-Tech Seals standard wiper material is
urethane, however, Nitrile, HNBR, Viton®, PEEK and Hytrel® are available. Things that should be considered when selecting
the material of your wiper include: required abrasion resistance, elasticity, resilience and fluid compatibility.
Part Numbers:
W __ __ - ___ ___ ___ ___ ___
Material (if other than Urethane)
Wiper Prefix Rod Diameter (Nominal)
Example: WAN 1250 - Urethane AN-Style Wiper - Gland with 1 - 1/4” Nom. I.D.
DT, D, DS and DX
+0.004
C
-0.000 0.025 R Max.
Wipers
B D
+0.006 +0.010 A DT Wiper - one piece snap-in type rod wiper designed for medium
-0.000 -0.000
duty applications. O.D. lip provides improved O.D. ingression
resistance. RL wiper lip reduces apparent rod seal leakage with
equivalent ingression resistance to a sharp lip wiper.
DT, D, DS and DX are all available in the sizes listed below. WD prefix
most commonly represents Hi-Tech Seals DT style wiper.
Wipers
DT D DS DX
DT, D, DS and DX are all available in the sizes listed below. WD prefix most commonly represents Hi-Tech Seals
DT style wiper. For specific styles or materials please contact Hi-Tech Seals.
WD 5000 5.000 5.747 0.374 5.493 WD 9750 9.750 10.497 0.374 10.243
WD 5125 5.125 5.872 0.374 5.618 WD 10000 10.000 10.997 0.499 10.659
WD 5250 5.250 5.997 0.374 5.743 WD 10250 10.250 11.247 0.499 10.909
WD 5375 5.375 6.122 0.374 5.868 WD 10500 10.500 11.497 0.499 11.159
WD 5500 5.500 6.247 0.374 5.993 WD 10750 10.750 11.747 0.499 11.409
WD 5625 5.625 6.372 0.374 6.118 WD 11000 11.000 11.997 0.499 11.659
WD 5750 5.750 6.497 0.374 6.243 WD 11250 11.250 12.247 0.499 11.909
WD 5875 5.875 6.622 0.374 6.368 WD 11500 11.500 12.497 0.499 12.159
WD 6000 6.000 6.747 0.374 6.493 WD 11750 11.750 12.747 0.499 12.409
WD 6250 6.250 6.997 0.374 6.743 WD 12000 12.000 12.997 0.499 12.659
WD 6500 6.500 7.247 0.374 6.993 WD 12500 12.500 13.497 0.499 13.159
WD 6750 6.250 7.497 0.374 7.243 WD 13000 13.000 13.997 0.499 13.659
WD 7000 7.000 7.747 0.374 7.493
AN-Style
+0.003
C
-0.003 0.025 R Max.
Wipers
B D A
+0.004 +0.005 +0.000
-0.000 -0.000 -0.002 AN Wiper Light duty snap-in wiper that will retrofit
into glands prescribed in MS-3375.
Wipers
(A) (B) (C) (D) (A) (B) (C) (D)
Part Rod Groove Groove Shoulder Part Rod Groove Groove Shoulder
Number Diameter Diameter Width Diameter Number Diameter Diameter Width Diameter
WAN 4375 4.372 4.802 0.138 4.615 WAN 8000 7.997 8.489 0.154 8.272
WAN 4500 4.497 4.927 0.138 4.740 WAN 8250 8.247 8.739 0.154 8.522
WAN 4625 4.622 5.052 0.138 4.865 WAN 8500 8.497 8.989 0.154 8.772
WAN 4750 4.747 5.177 0.138 4.990 WAN 8750 8.747 9.239 0.154 9.022
WAN 4875 4.872 5.302 0.138 5.115 WAN 9000 8.997 9.489 0.154 9.272
WAN 5000 4.997 5.427 0.138 5.240 WAN 9250 9.247 9.739 0.154 9.522
WAN 5125 5.122 5.552 0.138 5.365 WAN 9500 9.497 9.989 0.154 9.772
WAN 5250 5.247 5.677 0.138 5.490 WAN 9750 9.747 10.239 0.154 10.022
WAN 5375 5.372 5.802 0.138 5.615 WAN 10000 9.997 10.489 0.154 10.272
WAN 5500 5.497 5.927 0.138 5.740 WAN 10250 10.247 10.739 0.154 10.522
WAN 5625 5.622 6.114 0.154 5.896 WAN 10500 10.497 10.989 0.154 10.772
WAN 5750 5.747 6.239 0.154 6.022 WAN 10750 10.747 11.239 0.154 11.022
WAN 5875 5.872 6.364 0.154 6.146 WAN 11000 10.997 11.489 0.154 11.272
WAN 6000 5.997 6.489 0.154 6.272 WAN 11250 11.247 11.739 0.169 11.522
WAN 6250 6.247 6.739 0.154 6.522 WAN 11500 11.497 11.989 0.169 11.772
WAN 6500 6.497 6.989 0.154 6.772 WAN 11750 11.747 12.239 0.169 12.022
WAN 6750 6.747 7.239 0.154 7.022 WAN 12000 11.997 12.489 0.169 12.272
WAN 7000 6.997 7.489 0.154 7.272 WAN 12250 12.247 12.739 0.169 12.522
WAN 7250 7.247 7.739 0.154 7.522 WAN 12500 12.497 12.989 0.169 12.772
WAN 7500 7.497 7.989 0.154 7.772 WAN 12750 12.747 13.239 0.169 13.022
WAN 7750 7.747 8.239 0.154 8.022 WAN 13000 12.997 13.489 0.169 13.272
K-Style
+0.015
C
-0.000 0.025 R Max.
Wipers
B D
+0.005 +0.015 A
-0.000 -0.000
K Style Wiper - one piece snap-in type rod wiper
designed for light duty application. Secondary U-Cup.
30°
45 x 1/64 Chamfer
Wipers
B D
H Style Wiper one piece snap-in type rod wiper designed +0.003 +0.003 A
for light duty application. This style also acts as a secondary -0.000 -0.000
H-Style
Wipers
Wipers
B
+0.001 A
Metal Encased Wiper (WC)- Created with a Nitrile (N) or Urethane -0.000
(U) element encased in a high quality steel metal retainer.
The Metal Clad Wipers lip is rigid enough to handle tough scraping
environments such as dry/wet mud and ice, yet sensitive enough to
exclude fine dust and/or moisture.
Metal Encased
Wipers
Metal encased wipers are typically stocked in Nitrile (N) or Urethane (U), however, additional materials and sizes are available.
Wipers
PEEK -70°C to 260°C
Hytrel® -54°C to 149°C
Metal Clad (WCM) Metal Clad (WCM) Metal Clad (WCM) Metal Clad H-Style
Pin Eye (PE) (WCM)
Product Description:
Wipers are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act
as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/
or the damage of other sealing components. A properly selected wiper could help reduce the need for unscheduled
maintenance and even increase the time between maintenance cycles.
It is important to determine the correct style and material for your application. Things that should be considered when
selecting the material of your wiper include: required abrasion resistance, elasticity, resilience and fluid compatibility.
D-Style
L
H
Wipers
Interchangable Design WDM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L H
Wipers
Part Number I.D. O.D. L H Part Number I.D. O.D. L H
WDM 8092712 80.00 92.00 7.00 12.00 WDM 125137712 125.00 137.00 7.00 12.00
WDM 829057 82.00 90.00 5.00 7.00 WDM 1251401016 125.00 140.00 10.00 16.00
WDM 859357 85.00 93.00 5.00 7.00 WDM 12814057 128.00 140.00 5.00 7.00
WDM 859557 85.00 95.00 5.00 7.00 WDM 130142712 130.00 142.00 7.00 12.00
WDM 8597712 85.00 97.00 7.00 12.00 WDM 13514357 135.00 143.00 5.00 7.00
WDM 889657 88.00 96.00 5.00 7.00 WDM 135147712 135.00 147.00 7.00 12.00
WDM 909857 90.00 98.00 5.00 7.00 WDM 14014857 140.00 148.00 5.00 7.00
WDM 9010057 90.00 100.00 5.00 7.00 WDM 1401551016 140.00 155.00 10.00 16.00
WDM 90102712 90.00 102.00 7.00 12.00 WDM 15015857 150.00 158.00 5.00 7.00
WDM 95107712 95.00 107.00 7.00 12.00 WDM 150162712 150.00 162.00 7.00 12.00
WDM 10010857 100.00 108.00 5.00 7.00 WDM 150165712 150.00 165.00 7.00 12.00
WDM 100112712 100.00 112.00 7.00 12.00 WDM 1501651016 150.00 165.00 10.00 16.00
WDM 10511357 105.00 113.00 5.00 7.00 WDM 155167712 155.00 167.00 7.00 12.00
WDM 105117712 105.00 117.00 7.00 12.00 WDM 1601751016 160.00 175.00 10.00 16.00
WDM 11011857 110.00 118.00 5.00 7.00 WDM 1701851016 170.00 185.00 10.00 16.00
WDM 110122712 110.00 122.00 7.00 12.00 WDM 1751901016 175.00 190.00 10.00 16.00
WDM 115127712 115.00 127.00 7.00 12.00 WDM 1801951016 180.00 195.00 10.00 16.00
WDM 12012857 120.00 128.00 5.00 7.00 WDM 1802001018 180.00 200.00 10.00 18.00
WDM 12013057 120.00 130.00 5.00 7.00 WDM 1902101016 190.00 210.00 10.00 16.00
WDM 120132712 120.00 132.00 7.00 12.00 WDM 2002201018 200.00 220.00 10.00 18.00
Stepped D-Style L2
L1
H
Wipers
O.D. I.D.
WDM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L1 L2 H
Standard Material: Urethane
Wipers
I.D. O.D.
WHM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L H
Standard Material: Urethane
Stepped H-Style
L2 L2
L1 L1
H
Wipers
WHM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L1 L2 H
Wipers
O.D. I.D. Primary Design
Interchangable Design
WCM - ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
I.D. O.D. L H
Metal Clad
Wipers
Wipers
O.D. I.D.