Professional Documents
Culture Documents
ANSYS Tutorial
Applying a Transient Load Function
This tutorial demonstrates how to create a function in ANSYS and apply it as a pressure load for a
transient analysis.
Material Props
Material Models & Structural & Linear & Elastic & Isotropic & OK
(Click inside the EX box) 3e7
(Click inside the NUXY box) 0.3 & OK
Close Material Models window
Modeling
Create
Areas
Rectangle
By Dimensions
(Click X1 box) 0 (Click X2 box) 10
(Click Y1 box) 0 (Click Y2 box) 10 & OK
Circle
By Dimensions
(Click RAD1 Box) 1 & OK
Operate
Booleans
Subtract
Areas
(Click on base area from which to subtract) Click A1 (rectangle) & Apply
(Click on area to be subtracted) Click A2 (circle) & OK
1
Nyquist / Haghighi ABE 601
Solution
Define Loads
Apply
Structural
Displacement
Symmetry B.C
On Lines
(Pick lines X=0 & Y=0 and then click) OK
File
Save
Name it Load5000.func & Save
Close
2
Nyquist / Haghighi ABE 601
Parameters
Functions
Read from File…
Select load5000.func & Open
(Function loader Appears)
Table Parameter Name: Sin5000 & OK
3
Nyquist / Haghighi ABE 601
Solution
Analysis Type
4
Nyquist / Haghighi ABE 601
New Analysis
Choose Transient & OK
Choose Full & OK
Sol’n Controls
Basic Tab
Time at end of loadstep: 16
Click on Time Increment
Time step size: 1
Frequency: Choose Write every substeps
Transient Tab
Choose Ramped Loading & OK
5
Nyquist / Haghighi ABE 601
Solve
Current LS
Read Results
By Pick
(select the substep of interest) & READ
Close
Plot Results
Contour Plot
(Choose the plots of interest)
6
Nyquist / Haghighi ABE 601