Professional Documents
Culture Documents
Procedure
Procedure
When doing an investigatory project there is a procedure that you must follow
first, prepare the lab gown for you to wear during the experiment. Second, make sure
the Styrofoam, bowl, acetone, and stick are clean and ready for the experiment. Third,
clean the lab before doing the experiment. Fourth, get the bowl then pour the Acetone
and quickly put the Styrofoam then press it until it is fully melted and sticky. Fifth, when
the Styrofoam is melted, quickly put it in a glass container and tightly seal it. Sixth,
Store it overnight and wait for better results. Seventh, after storing the melted
Styrofoam, it can now be used. Eight, when using, use a stick to get or crape the glue
and put it in the paper or anything you want to put adhesives on. Nine, when you are
putting the glue, make sure to quickly put it in the material because once it is dried, the
viscosity and adhesive strength will be affected. Lastly, turn the cap back and tightly