This document outlines the qualification requirements for a thick section pipe made of ASTM A 995 Gr. 4A/MDS D46 steel for a NORSOK M-650 application. It specifies that tensile, impact, hardness/chemical/microstructure/ferrite, and pitting specimens must be taken from the quarter thickness location of the pipe for qualification testing.
This document outlines the qualification requirements for a thick section pipe made of ASTM A 995 Gr. 4A/MDS D46 steel for a NORSOK M-650 application. It specifies that tensile, impact, hardness/chemical/microstructure/ferrite, and pitting specimens must be taken from the quarter thickness location of the pipe for qualification testing.
This document outlines the qualification requirements for a thick section pipe made of ASTM A 995 Gr. 4A/MDS D46 steel for a NORSOK M-650 application. It specifies that tensile, impact, hardness/chemical/microstructure/ferrite, and pitting specimens must be taken from the quarter thickness location of the pipe for qualification testing.