Professional Documents
Culture Documents
Particle Counter: Optical Counting Aerosol Particle Counters
Particle Counter: Optical Counting Aerosol Particle Counters
Contents
Optical counting
Aerosol particle counters
U.S. FED STD 209E cleanroom standards
ISO 14644-1 cleanroom standards
Cleanroom class comparison
Liquid particle counters
Solid particle counters
Detection methods
Other types of particle counters
Remote particle counters
Manifold particle counters
Hand-held particle counter
See also
References
External links
Optical counting
The nature of particle counting is based upon either light
scattering, light obscuration, or direct imaging. A high intensity
light source is used to illuminate the particle as it passes through
the detection chamber. The particle passes through the light
source (typically a laser or halogen light) and if light scattering is
used, then the redirected light is detected by a photo detector. If
direct imaging is used, a halogen light illuminates particles from
the back within a cell while a high definition, high magnification
camera records passing particles. Recorded video is then
Diagram of a particle counter
analyzed by computer software to measure particle attributes. If
light blocking (obscuration) is used the loss of light is detected.
The amplitude of the light scattered or light blocked is measured and the particle is counted and tabulated into standardized
counting bins. The image to the right shows a light scattering particle counter diagram. More information about types of particle
counters and types of particle detection follow in this article.
Direct imaging particle counting employs the use of a high resolution camera and a light to detect particles. Vision based particle
sizing units obtain two dimensional images that are analyzed by computer software to obtain particle size measurement in both
the laboratory and online. Along with particle size, color and shape analysis can also be determined.
There are several direct-reading instruments for measuring aerosol particle emissions. The condensation particle counter and
differential mobility particle sizers, including the scanning mobility particle sizer and fast mobility particle sizer, can measure
aerosol concentration; the diffusion charger and electric low pressure impactor can measure surface area; the size selective static
sampler and tapered element oscillating microbalance can measure mass.[1]
Particles/ft³
Class 0.1 µm 0.2 µm 0.3 µm 0.5 µm 1.0 µm 5.0 µm
1 35 7 3 1
10 350 75 30 10 2
100 3500 750 300 100 22 3
1,000 1,000 218 7
10,000 10,000 2,180 70
100,000 100,000 21,800 700
The replacement standard is ISO 14644-1 and is meant to completely replace Federal Standard 209E. This ISO Standard can be
found through the non-profit organization, Institute of Environmental Sciences and Technology (IEST). Each of these standards
represents the maximum allowable number of particles in a unit of air. The typical unit is either cubic feet or cubic meters. The
particle counts are always listed as cumulative.
Particles/m³
Class 0.1 µm 0.2 µm 0.3 µm 0.5 µm 1.0 µm 5.0 µm
ISO 1 10 2
ISO 2 100 24 10 4
ISO 3 1,000 237 102 35 8
ISO 4 10,000 2,370 1,020 352 83
ISO 5 100,000 23,700 10,200 3,520 832 29
ISO 6 1,000,000 237,000 102,000 35,200 8,320 293
ISO 7 352,000 83,200 2,930
ISO 8 3,520,000 832,000 29,300
ISO 9 35,200,000 8,320,000 293,000
Liquid particle counters are also used to determine the cleanliness level of hydraulic fluids and various other systems including
(engines, gears and compressors), the reason being that 75-80% of hydraulic breakdowns can be attributed to contamination.
There are various types, installed on the equipment, operated in a laboratory as part of an oil analysis programme.[2] or portable
units that can be transported to site, e.g., a construction site, and then used on the machine, e.g., a bulldozer, to determine fluid
cleanliness. By determining and monitoring these levels, and following a proactive or predictive maintenance program, the user
can reduce hydraulic failures, increase uptime and machine availability, and to reduce oil consumption. They can also be used to
assure that hydraulic fluids have been cleaned using filtration, to acceptable or target cleanliness levels. There are various
standards in use in the hydraulic industry, of which ISO 4406:1999, NAS1638 and SAE AS 4059 are probably the most common.
Detection methods
There are several methods used for detecting and measuring particle size or size distribution — light blocking (obscuration), light
scattering, Coulter principle and direct imaging.
The light blocking optical particle counter method is typically useful for detecting and sizing particles greater than 1 micrometer
in size and is based upon the amount of light a particle blocks when passing through the detection area of the particle counter.
This type of technique allows high resolution and reliable measurement.
The light scattering method is capable of detecting smaller-sized particles. This technique is based upon the amount of light that
is deflected by a particle passing through the detection area of the particle counter. This deflection is called light scattering.
Typical detection sensitivity of the light scattering method is 0.05 micrometre or larger. However, employment of the
condensation nuclei counter (CNC) technique would allow a higher detection sensitivity in particle sizes down to nanometre
range. A typical application is monitoring of ultrapure water in semiconductor fabrication facilities.
The light blocking method is specified for particle counters that are used for counting in hydraulic and lubricating fluids. Particle
counters are used here to measure contamination of hydraulic oil, and therefore allow the user to maintain their hydraulic system,
reduce breakdowns, schedule maintenance during no or slow work periods, monitor filter performance, etc. Particle counters used
for this purpose typically use ISO Standard 4406:1999 as their reporting standard, and ISO 11171 as the calibration standard.
Others also in use are NAS 1638 and its successor SAE AS4059D.
Direct imaging is a technique that uses the light emitted by a laser as a source to illuminate a cell where particles are passing
through. The technique does not measure the light blocked by the particles, but rather measures the area of the particles
functioning like an automated microscope. A pulsed laser diode freezes the particle motion. The light transmitted through the
fluid is imaged onto an electronic camera with macro focusing optics. The particles in the sample will block the light, and the
resulting silhouettes will be imaged onto the digital camera chip.
This computer based system can integrate into a database, alarming and may have e-mail capability to notify facility or process
personnel when conditions inside the cleanroom have exceeded predetermined environmental limits. Remote particle counters are
available in several different configurations, from single channel to models that detect up to 8 channels simultaneously. Remote
particle counters can have a particle size detection range from 0.1 to 100 micrometres and may feature one of a variety of output
options including 4-20 mA, RS-485 Modbus, Ethernet and pulse output.
Manifold particle counters
Modified aerosol portable particle counter that has been attached to a sequencing sampling system. The sequencing sampling
system allows for one particle counter to sample multiple locations, via a series of tubes drawing air from up to 32 locations
inside a cleanroom. Typically less expensive than utilizing remote particle counters, each tube is monitored in sequence.
See also
Particle mass analyser
Particulate matter sampler
Aerosol mass spectrometry
References
1. "Current Strategies for Engineering Controls in Nanomaterial Production and Downstream Handling Processes"
(https://www.cdc.gov/niosh/docs/2014-102/default.html). U.S. National Institute for Occupational Safety and
Health: 49. November 2013. doi:10.26616/NIOSHPUB2014102 (https://doi.org/10.26616%2FNIOSHPUB201410
2). Retrieved 2017-03-05.
2. "ISO 4406 cleanliness code. Determining cleanliness on the miniature scale. | Learn Oil Analysis" (http://learnoila
nalysis.com/iso-cleanliness-code-measuring-the-dirtyness-of-your-fluid/). learnoilanalysis.com. Retrieved
2017-12-14.
3. "ISO 4406 cleanliness code. Determining cleanliness on the miniature scale. | Learn Oil Analysis" (http://learnoila
nalysis.com/iso-cleanliness-code-measuring-the-dirtyness-of-your-fluid/). learnoilanalysis.com. Retrieved
2017-12-14.
External links
www.iest.org (http://www.iest.org) — Institute of Environmental Sciences and Technology
Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using
this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia
Foundation, Inc., a non-profit organization.