Professional Documents
Culture Documents
Access Equipment
Hardware Description 4 Chassis
4 Chassis
Overview
NOTE
In specific areas, as the auxiliary materials are different, the sales BOM numbers may be different.
Different sales BOM numbers may correspond to the same description in the device attribute table. The
actual sales BOM number in an area prevails.
Appearance
Panel
RST There is only one RST button for resetting the device.
The RST button can also be used to delete passwords and
configuration files on the device. Once you press the RST button, the
device starts to reset. Then you press and hold down the RST button
35s to 45s until the SATA and ALM indicators blink green. Then
release the RST button so that the device starts to automatically
delete passwords and configuration files. If you keep holding down
the RST button (approximately 10s) until the two indicators are not
blinking green simultaneously, the device only resets and does not
delete the passwords and configuration files.
7 Unspecified
l Slot number
The slot number of ATN 905-F is always 0.
l Subcard number
The ATN 905-F does not support subcards. Therefore, the subcard number of the ATN
905-F is fixed as 2.
l Port number
The port numbers of service interfaces on the ATN 905-F begin with 0. Port numbering
depends on the number of interfaces on the ATN 905-F.
NOTE
The OAM interface is always numbered Ethernet 0/0/0.
Label
Grounding label
HUAWEI
华为技术有限公司 中国制造
HUAWEI TECHNOLOGIES CO.,LTD. MADE IN CHINA
Technical Specifications
Item Specification
Item Specification
MTBF 40 years
MTTR 2 hours
Availability 0.99999
Long-term operating altitude ≤ 4000 meters. If the altitude is between 1800 meters
and 4000 meters, the operating temperature of the
device must decrease by 1°C for every 220 meter
increase in altitude.
Overview
NOTE
In specific areas, as the auxiliary materials are different, the sales BOM numbers may be different.
Different sales BOM numbers may correspond to the same description in the device attribute table. The
actual sales BOM number in an area prevails.
Appearance
Panel
RST There is only one RST button for resetting the device.
The RST button can also be used to delete passwords and
configuration files on the device. Once you press the RST button, the
device starts to reset. Then you press and hold down the RST button
35s to 45s until the SATA and ALM indicators blink green. Then
release the RST button so that the device starts to automatically
delete passwords and configuration files. If you keep holding down
the RST button (approximately 10s) until the two indicators are not
blinking green simultaneously, the device only resets and does not
delete the passwords and configuration files.
7 Unspecified
3 Unspecified
6 Unspecified
7 Unspecified
8 Unspecified
1 Unspecified Unspecified
2 Unspecified Unspecified
2 Grounding end
87654321
3 Input for the digital
parameter
5 Grounding end
6 Grounding end
l Slot number
The slot number of ATN 910C-A is always 0.
l Subcard number
The ATN 910C-A does not support subcards. Therefore, the subcard number of the ATN
910C-A is fixed as 2.
l Port number
The port numbers of service interfaces on the ATN 910C-A begin with 0. Port
numbering depends on the number of interfaces on the ATN 910C-A.
NOTE
The OAM interface is always numbered Ethernet 0/0/0.
Label
Backplane bar code label The bar code of the backplane will be
retrieved by device as the equipment
serial number (ESN).
合格证/QUALIFICATION CARD Certificate label This label suggests that the device is
qualified.
HUAWEI
华为技术有限公司 中国制造
HUAWEI TECHNOLOGIES CO.,LTD. MADE IN CHINA
Product nameplate label This label suggests the product name and
certification.
Technical Specifications
Item Specification
Item Specification
MTBF 40 years
MTTR 2 hours
Availability 0.99999
Redundant fans If a single fan fails, the system can still work for a
short period of time at an ambient temperature of
50°C.
Long-term operating altitude ≤4000 meters. If the altitude is between 1800 meters
and 4000 meters, the operating temperature of the
device must decrease by 1°C for every 220 meter
increase in altitude.
Overview
NOTE
In specific areas, as the auxiliary materials are different, the sales BOM numbers may be different.
Different sales BOM numbers may correspond to the same description in the device attribute table. The
actual sales BOM number in an area prevails.
Appearance
Panel
RST There is only one RST button for resetting the device.
The RST button can also be used to delete passwords and
configuration files on the device. Once you press the RST button, the
device starts to reset. Then you press and hold down the RST button
35s to 45s until the SATA and ALM indicators blink green. Then
release the RST button so that the device starts to automatically
delete passwords and configuration files. If you keep holding down
the RST button (approximately 10s) until the two indicators are not
blinking green simultaneously, the device only resets and does not
delete the passwords and configuration files.
7 Unspecified
3 Unspecified
6 Unspecified
7 Unspecified
8 Unspecified
1 Unspecified Unspecified
2 Unspecified Unspecified
2 Grounding end
87654321
3 Input for the digital
parameter
5 Grounding end
6 Grounding end
l Slot number
The slot number of ATN 910C-B is always 0.
l Subcard number
The ATN 910C-B does not support subcards. Therefore, the subcard number of the ATN
910C-B is fixed as 2.
l Port number
The port numbers of service interfaces on the ATN 910C-B begin with 0. Port numbering
depends on the number of interfaces on the ATN 910C-B.
NOTE
The OAM interface is always numbered Ethernet 0/0/0.
Label
Backplane bar code label The bar code of the backplane will be
retrieved by device as the equipment
serial number (ESN).
合格证/QUALIFICATION CARD Certificate label This label suggests that the device is
qualified.
HUAWEI
华为技术有限公司 中国制造
HUAWEI TECHNOLOGIES CO.,LTD. MADE IN CHINA
Product nameplate label This label suggests the product name and
certification.
Technical Specifications
Item Specification
Item Specification
MTBF 40 years
MTTR 2 hours
Availability 0.99999
Redundant fans If a single fan fails, the system can still work for a
short period of time at an ambient temperature of
50°C.
Long-term operating altitude ≤ 4000 meters. If the altitude is between 1800 meters
and 4000 meters, the operating temperature of the
device must decrease by 1°C for every 220 meter
increase in altitude.
Overview
NOTE
In specific areas, as the auxiliary materials are different, the sales BOM numbers may be different.
Different sales BOM numbers may correspond to the same description in the device attribute table. The
actual sales BOM number in an area prevails.
Appearance
Panel
RST There is only one RST button for resetting the device.
The RST button can also be used to delete passwords and
configuration files on the device. Once you press the RST button, the
device starts to reset. Then you press and hold down the RST button
35s to 45s until the SATA and ALM indicators blink green. Then
release the RST button so that the device starts to automatically
delete passwords and configuration files. If you keep holding down
the RST button (approximately 10s) until the two indicators are not
blinking green simultaneously, the device only resets and does not
delete the passwords and configuration files.
7 Unspecified
3 Unspecified
6 Unspecified
7 Unspecified
8 Unspecified
1 Unspecified Unspecified
2 Unspecified Unspecified
2 Grounding end
87654321
3 Input for the digital
parameter
5 Grounding end
6 Grounding end
l Slot number
The slot number of ATN 910C-D is always 0.
l Subcard number
The ATN 910C-D does not support subcards. Therefore, the subcard number of the ATN
910C-D is fixed as 2.
l Port number
The port numbers of service interfaces on the ATN 910C-D begin with 0. Port
numbering depends on the number of interfaces on the ATN 910C-D.
NOTE
The OAM interface is always numbered Ethernet 0/0/0.
Label
Backplane bar code label The bar code of the backplane will be
retrieved by device as the equipment
serial number (ESN).
合格证/QUALIFICATION CARD Certificate label This label suggests that the device is
qualified.
HUAWEI
华为技术有限公司 中国制造
HUAWEI TECHNOLOGIES CO.,LTD. MADE IN CHINA
Product nameplate label This label suggests the product name and
certification.
Technical Specifications
Item Specification
Item Specification
MTBF 40 years
MTTR 2 hours
Availability 0.99999
Redundant fans If a single fan fails, the system can still work for a
short period of time at an ambient temperature of
50°C.
Long-term operating altitude ≤ 4000 meters. If the altitude is between 1800 meters
and 4000 meters, the operating temperature of the
device must decrease by 1°C for every 220 meter
increase in altitude.
Overview
NOTE
In specific areas, as the auxiliary materials are different, the sales BOM numbers may be different.
Different sales BOM numbers may correspond to the same description in the device attribute table. The
actual sales BOM number in an area prevails.
Appearance
Slot Layout
Labels
1类激光产品
Class 1 Laser Product
N14036
合格证/QUALIFICATION CARD
この装置は、クラスA情報技術装置です。この装置を家庭環境で
使用すゐと電波妨害を引き起こすことがぁります 。この場合には使用
者が適切な対策を講ずゐよぅ要求されゐことがぁります 。 VCCI -A
Backplane bar code label The bar code of the backplane will be
retrieved by the device as the equipment
serial number (ESN).
Fan warning label The label suggests that do not touch the
fan leaves when the fan is rotating.
HUAWEI
华为技术有限公司 中国制造
HUAWEI TECHNOLOGIES CO.,LTD. MADE IN CHINA
Product nameplate label The label suggests the product name and
certification.
Technical Specifications
Item Specification
Item Specification
MTBF 40 years
MTTR 2 hours
Availability 0.99999
Redundant fans l If a single fan fails, the system can still work for a
short period of time at an ambient temperature of
50°C(64G System).
l If a single fan fails, the system can still work for a
short period of time at an ambient temperature of
40°C(160G System).
Long-term operating altitude ≤ 4000 meters. If the altitude is between 1800 meters
and 4000 meters, the operating temperature of the
device must decrease by 1°C for every 220 meter
increase in altitude.
Overview
NOTE
In specific areas, as the auxiliary materials are different, the sales BOM numbers may be different.
Different sales BOM numbers may correspond to the same description in the device attribute table. The
actual sales BOM number in an area prevails.
Appearance
Slot Layout
Label
Backplane bar code label The bar code of the backplane will be
retrieved by the device as the equipment
serial number (ESN).
Fan warning label The label suggests that do not touch the
fan leaves when the fan is rotating.
HUAWEI
华为技术有限公司 中国制造
HUAWEI TECHNOLOGIES CO.,LTD. MADE IN CHINA
Product nameplate label The label suggests the product name and
certification.
Technical Specifications
Item Specification
Item Specification
MTBF 40 years
MTTR 2 hours
Availability 0.99999
Redundant fans If a single fan fails, the system can still work for a
short period of time at an ambient temperature of
40°C.
Long-term operating altitude ≤ 4000 meters. If the altitude is between 1800 meters
and 4000 meters, the operating temperature of the
device must decrease by 1°C for every 220 meter
increase in altitude.
Overview
NOTE
In specific areas, as the auxiliary materials are different, the sales BOM numbers may be different.
Different sales BOM numbers may correspond to the same description in the device attribute table. The
actual sales BOM number in an area prevails.
Appearance
Slot Layout
Fan board 1 14 -
MPU- 10GE/ 10GE/ 20GE/ 20GE/ 4*10G 4*10G 10GE/ 10GE/ 10GE/
ANJ1 8GE/4 8GE/4 2*10G 2*10G E/ E/ 8GE/4 8GE/4 8GE/4
CXP GE/ GE/ E/ E/ 20GE/ 20GE/ GE/ GE/ GE/
CPOS CPOS 10GE/ 10GE/ 2*10G 2*10G CPOS CPOS CPOS
/E1 /E1 8GE/4 8GE/4 E/ E/ /E1 /E1 /E1
GE/ GE/ 10GE/ 10GE/
CPOS CPOS 8GE/4 8GE/4
/E1 /E1 GE/ GE/
CPOS CPOS
/E1 /E1
MPU- 4*10G 4*10G 4*10G 4*10G 100G 100G 4*10G 4*10G 10GE/
ANJ2 E/ E/ E/ E/ E/ E/ E/ E/ 8GE/4
CXP 20GE/ 20GE/ 20GE/ 20GE/ 2*50G 2*50G 20GE/ 20GE/ GE/
2*10G 2*10G 2*10G 2*10G E/ E/ 2*10G 2*10G CPOS
E/ E/ E/ E/ 50GE/ 50GE/ E/ E/ /E1
10GE/ 10GE/ 10GE/ 10GE/ 4*10G 4*10G 10GE/ 10GE/
8GE/4 8GE/4 8GE/4 8GE/4 E/ E/ 8GE/4 8GE/4
GE/ GE/ GE/ GE/ 20GE/ 20GE/ GE/ GE/
CPOS CPOS CPOS CPOS 2*10G 2*10G CPOS CPOS
/E1 /E1 /E1 /E1 E/ E/ /E1 /E1
10GE/ 10GE/
8GE/4 8GE/4
GE/ GE/
CPOS CPOS
/E1 /E1
NOTE
Description of the capacity of each slot used by Interface board when using different Control board.
Label
Backplane bar code label The bar code of the backplane will be
retrieved by the device as the equipment
serial number (ESN).
Fan warning label The label suggests that do not touch the
fan leaves when the fan is rotating.
Technical Specifications
Item Specification
MTBF 40 years
MTTR 2 hours
Availability 0.99999
Item Specification
Redundant fans If a single fan fails, the system can still work for a
short period of time at an ambient temperature of
40°C.
Long-term operating altitude ≤ 4000 meters. If the altitude is between 1800 meters
and 4000 meters, the operating temperature of the
device must decrease by 1°C for every 220 meter
increase in altitude.