DIN 29874P Tx) 77 MM 279444 OOLO72S 2 me
UDC 621.643.414.062/.063-034.14 DEUTSCHE NORM ‘September 1977
Threaded steel pipe fittings
Crosses, tees, elbows
Stahifittings mit Gewinde; Kreuz, T, Winket
As itis currentpractice in standards published by the International Organization for Standardization (ISO), the comma
‘has been used throughout as a decimal marker.
Compared with the June 1962 edition, this standard has been amended by adopting the unite lald down in Gesote fiber
Etnhelten im Messwesen (Law on Units in Metrology) of Znd July 1969 without changing the factual content of the
standard,
Dimensions in mm
NZ
TN i
a
Dosignation of a galvanized cross Designation of a too for a DN 60 Designation of an elbow for a DN'50
‘or a DN 80 threaded pipe threaded pipe {symbol 2), black threaded pipe (symbol 2), black
(symbol 2): finish: finish:
Cross DIN 2987 —2 galvanized T DIN 2987 ~2 Elbow DIN 2987 — 2
Symbol
Nominal size Nominal size -
DN DN
Ye 6 E we 40,
Va a E 50
Fo 10 E 5
V2 16 “80
a 20 ; 100
1 2
1a 32 50.
‘Symbol
‘Thread: Whitworth pipe thread in accordance with ‘DIN 2999 Part 1
No part tia standet may be reproduced wit oe the pro parnision of DN Daath ltt ft Normung Bein
Material: Stee!
Finish: Standard finieh: black
Ifa galvanized finih Is quired, this chal bo i
1d In the standard detignation.
Hydraulic prossure tost: 76 bar
For permissible linear daviations see DIN 2080
For madium.waight threaded pipes see DIN 2440
For heavy.weight threaded pipes see DIN 2441
For reducing tees and elbows see DIN 2087 Part 2
For Explanatory notes see page 2
‘Bouth Verlag GmbH, Bern Shas oxlos sae right for Garman Sandarde QR Nomen) ‘DIN 2987 Part Engl. Price group 4
o783 ‘Seles No, 0104
Sopyment oy Mee DN Deaiscnes ast tut Pur Normans PT
Mon an 22 144254 2007‘DIN 2967KPT) 77 MM 2794446 OOLO72b 4 a |
Page 2 DIN 2987 Part 1
Explanatory notes
Standards DIN 2980 to DIN 2993 have been entitled “Threaded steel pipe fittings” in order to distingulsh them from
standards dealing with other types of connection.
‘The division of DIN 2980 according to “Piping components’ and “Pipe
fields of application.
‘The standards specify ll types and sizes required for usual plumbing practice. Sockets and reducing sockets have been dealt
with separately. For technical reasons, only the reinforced pattern of piping components with parallel threads hes been
specified.
Certain overall dimensions have been slightly modified in order to ensure agreement with ISO Recommendation R 49 on
‘malleable cast iron fittings, as far as this is possible from the production viewpoint,
In DIN 2980, the permissible deviations for piping components have been limited and have been introduced for the first
time for the position of the thread axis ralative to the fitting axis
8 been made with ragard to the differant
Copyright by the DIN DeulschesTsltut Pur Normung EV
Mon an 22 144303 2007