9/1/2019 21:32:1 1 Geometry object created. 9/1/2019 21:34:33 New polyline destination: <01-Polilinea> 9/1/2019 21:34:33 -------------------------------- Starting function Create Polyline 9/1/2019 21:34:33 Digitize the polyline points in the viewer. 9/1/2019 21:34:43 Digitize the polyline points in the viewer. 9/1/2019 21:34:45 -------------------------------- Ending function Create Polyline 9/1/2019 21:35:44 Click on elements in viewer to query. Click right when finished. 9/1/2019 21:37:1 Click on elements in viewer to query. Click right when finished. 9/1/2019 21:52:24 -------------------------------- Starting function Minimum Distance Between Elements 9/1/2019 21:52:24 Pick two polylines to measure minimum distance. Click right to finish. 9/1/2019 21:53:0 Min. distance btw. point - point: 469.729 m. 9/1/2019 21:54:32 Min. distance btw. point - polyline: 0.000 m. 9/1/2019 21:54:45 Min. distance btw. point - line: 358.295 m. 9/1/2019 21:56:11 -------------------------------- Ending function Minimum Distance Between Elements 9/1/2019 22:14:18 New polyline destination: <01-Polilinea> 9/1/2019 22:14:18 -------------------------------- Starting function Create Polyline 9/1/2019 22:14:18 Digitize the polyline points in the viewer. 9/1/2019 22:14:25 Digitize the polyline points in the viewer. 9/1/2019 22:14:27 Digitize the polyline points in the viewer. 9/1/2019 22:14:28 -------------------------------- Ending function Create Polyline 9/1/2019 22:15:27 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:15:32 Selected 0 elements 9/1/2019 22:15:32 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:15:38 Object: \01-Ejercicio\01-Polilinea.msr 9/1/2019 22:15:38 Selected 3 polylines with 11 total points. 9/1/2019 22:20:32 1 Geometry object created. 9/1/2019 22:22:5 New polyline destination: <01_Polilinea> 9/1/2019 22:22:5 -------------------------------- Starting function Create Polyline 9/1/2019 22:22:5 Digitize the polyline points in the viewer. 9/1/2019 22:22:16 Digitize the polyline points in the viewer. 9/1/2019 22:22:24 Digitize the polyline points in the viewer. 9/1/2019 22:22:24 -------------------------------- Ending function Create Polyline 9/1/2019 22:22:39 -------------------------------- Starting function Add Point 9/1/2019 22:22:40 To add a marker, click on an existing marker and drag a copy to a new location. To add a point to a polyline click on an edge and drag the node. To add a point to a surface click an edge with line snap ON or click a face and drag. 9/1/2019 22:22:46 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:48 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:49 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:51 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:53 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:54 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:55 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:56 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:57 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:57 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:58 Point added to polyline in object 01_Polilinea 9/1/2019 22:22:59 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:0 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:2 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:3 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:4 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:5 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:6 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:7 Point added to polyline in object 01_Polilinea 9/1/2019 22:23:37 -------------------------------- Ending function Add Point 9/1/2019 22:25:51 -------------------------------- Starting function Move Point 9/1/2019 22:25:51 Move a marker or polyline, polygon, or surface node. 9/1/2019 22:25:51 Drag a point to move it. Click right to end function. 9/1/2019 22:26:5 -------------------------------- Ending function Move Point 9/1/2019 22:26:8 -------------------------------- Starting function Group Point Move 9/1/2019 22:26:8 Select the nodes to be moved (hold Shift to unselect). Click right to continue. 9/1/2019 22:26:12 Drag a reference node and the selected nodes will move together. Click right to end move and select new nodes. 9/1/2019 22:26:20 Select the nodes to be moved (hold Shift to unselect). Click right to continue. 9/1/2019 22:26:20 -------------------------------- Ending function Group Point Move 9/1/2019 22:27:40 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:28:21 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:28:21 Selected 1 polylines with 29 total points. 9/1/2019 22:29:8 -------------------------------- Starting function Append to Polyline 9/1/2019 22:29:8 Select polyline end node from which to append. 9/1/2019 22:29:16 Digitize string to add, click right when done. 9/1/2019 22:29:19 Select polyline end node from which to append. 9/1/2019 22:29:20 -------------------------------- Ending function Append to Polyline 9/1/2019 22:29:32 -------------------------------- Starting function Append to Polyline 9/1/2019 22:29:32 Select polyline end node from which to append. 9/1/2019 22:29:34 Digitize string to add, click right when done. 9/1/2019 22:29:38 Select polyline end node from which to append. 9/1/2019 22:29:38 -------------------------------- Ending function Append to Polyline 9/1/2019 22:29:57 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:30:0 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:30:0 Selected 1 polylines with 33 total points. 9/1/2019 22:30:14 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:30:17 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:30:17 Selected 1 polylines with 33 total points. 9/1/2019 22:30:35 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:30:39 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:30:39 Selected 1 polylines with 10 total points. 9/1/2019 22:30:42 -------------------------------- Starting function Append to Polyline 9/1/2019 22:30:42 Select polyline end node from which to append. 9/1/2019 22:30:44 Digitize string to add, click right when done. 9/1/2019 22:30:49 Select polyline end node from which to append. 9/1/2019 22:30:49 -------------------------------- Ending function Append to Polyline 9/1/2019 22:32:29 -------------------------------- Starting function Append to Polyline 9/1/2019 22:32:29 Select polyline end node from which to append. 9/1/2019 22:32:31 Digitize string to add, click right when done. 9/1/2019 22:32:39 Select polyline end node from which to append. 9/1/2019 22:32:40 -------------------------------- Ending function Append to Polyline 9/1/2019 22:33:1 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:33:16 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:33:16 Selected 1 polylines with 17 total points. 9/1/2019 22:33:22 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:33:25 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:33:25 Selected 2 polylines with 50 total points. 9/1/2019 22:33:40 -------------------------------- Starting function Delete Points 9/1/2019 22:34:14 -------------------------------- Ending function Delete Points 9/1/2019 22:34:17 -------------------------------- Starting function Group Point Delete 9/1/2019 22:34:17 Select nodes to be deleted (hold Shift to unselect). Click right to delete the nodes. 9/1/2019 22:34:24 -------------------------------- Ending function Group Point Delete 9/1/2019 22:34:50 -------------------------------- Starting function Group Point Delete 9/1/2019 22:34:50 Select nodes to be deleted (hold Shift to unselect). Click right to delete the nodes. 9/1/2019 22:35:20 -------------------------------- Ending function Group Point Delete 9/1/2019 22:36:42 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:36:44 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:36:44 Selected 2 polylines with 20 total points. 9/1/2019 22:36:52 -------------------------------- Starting function Polyline Close 9/1/2019 22:36:53 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:36:55 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:37:4 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:37:51 2 polylines were closed. 9/1/2019 22:37:51 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:37:53 -------------------------------- Ending function Polyline Close 9/1/2019 22:38:1 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:38:3 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:38:4 Selected 1 polygons with 11 total points. 9/1/2019 22:38:15 -------------------------------- Starting function Delete Points 9/1/2019 22:38:19 -------------------------------- Ending function Delete Points 9/1/2019 22:38:21 Click on elements in viewer to query. Click right when finished. 9/1/2019 22:39:58 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:40:1 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:40:1 Selected 2 polygons with 18 total points. 9/1/2019 22:40:7 -------------------------------- Starting function Del Segments 9/1/2019 22:40:7 Select polyline/polygon segments to delete and click right to perform operation. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:40:17 7 segment(s) deleted from 2 element(s). 9/1/2019 22:40:17 Select polyline/polygon segments to delete and click right to perform operation. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:40:20 -------------------------------- Ending function Del Segments 9/1/2019 22:40:23 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:40:27 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:40:27 Selected 2 polylines with 4 total points. 9/1/2019 22:40:32 -------------------------------- Starting function Polyline Join 9/1/2019 22:40:32 Select endpoint of 1st polyline to join. 9/1/2019 22:40:33 Select endpoint of 2nd polyline to join. 9/1/2019 22:40:34 Select endpoint of 1st polyline to join. 9/1/2019 22:40:40 -------------------------------- Ending function Polyline Join 9/1/2019 22:40:41 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:40:43 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:40:43 Selected 1 polylines with 4 total points. 9/1/2019 22:41:35 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:41:38 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:41:38 Selected 6 polylines with 18 total points. 9/1/2019 22:41:41 -------------------------------- Starting function Polyline Join 9/1/2019 22:41:41 Select endpoint of 1st polyline to join. 9/1/2019 22:41:43 Select endpoint of 2nd polyline to join. 9/1/2019 22:41:44 Select endpoint of 1st polyline to join. 9/1/2019 22:41:46 Select endpoint of 2nd polyline to join. 9/1/2019 22:41:47 Select endpoint of 1st polyline to join. 9/1/2019 22:41:49 Select endpoint of 2nd polyline to join. 9/1/2019 22:41:51 Polyline cannot be joined to itself -- select again. 9/1/2019 22:41:52 Polyline cannot be joined to itself -- select again. 9/1/2019 22:41:55 -------------------------------- Ending function Polyline Join 9/1/2019 22:41:58 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:42:1 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:42:1 Selected 1 polylines with 10 total points. 9/1/2019 22:42:4 -------------------------------- Starting function Polyline Close 9/1/2019 22:42:4 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:42:6 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:42:12 1 polylines were closed. 9/1/2019 22:42:12 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:42:14 -------------------------------- Ending function Polyline Close 9/1/2019 22:45:8 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:45:12 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:45:12 Selected 3 polylines with 8 total points. 9/1/2019 22:45:14 -------------------------------- Starting function Polyline Join 9/1/2019 22:45:14 Select endpoint of 1st polyline to join. 9/1/2019 22:45:15 Select endpoint of 2nd polyline to join. 9/1/2019 22:45:15 Select endpoint of 1st polyline to join. 9/1/2019 22:45:16 Select endpoint of 2nd polyline to join. 9/1/2019 22:45:17 Select endpoint of 1st polyline to join. 9/1/2019 22:45:18 Select endpoint of 2nd polyline to join. 9/1/2019 22:45:18 Polyline cannot be joined to itself -- select again. 9/1/2019 22:45:22 -------------------------------- Ending function Polyline Join 9/1/2019 22:45:22 -------------------------------- Starting function Polyline Close 9/1/2019 22:45:22 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:45:23 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:45:29 1 polylines were closed. 9/1/2019 22:45:29 Select Polylines. Right click to end selection (Shift Click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:45:30 -------------------------------- Ending function Polyline Close 9/1/2019 22:45:36 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:45:39 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:45:39 Selected 2 polygons with 18 total points. 9/1/2019 22:45:42 -------------------------------- Starting function Smooth Polylines 9/1/2019 22:45:42 Select polylines/polygons to smooth and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:45:47 Select polylines/polygons to smooth and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:46:10 2 polyline/polygon(s) smoothed using the Node Preserving Spline method. 9/1/2019 22:46:10 Select polylines/polygons to smooth and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:46:12 -------------------------------- Ending function Smooth Polylines 9/1/2019 22:46:53 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:46:58 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:46:59 Selected 2 polygons with 108 total points. 9/1/2019 22:47:6 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:47:9 Object: \02-Funciones CAD\01_Polilinea.msr 9/1/2019 22:47:9 Selected 2 polygons with 108 total points. 9/1/2019 22:48:56 1 Geometry object created. 9/1/2019 22:49:59 New polyline destination: <02_Densify> 9/1/2019 22:49:59 -------------------------------- Starting function Create Polyline 9/1/2019 22:49:59 Digitize the polyline points in the viewer. 9/1/2019 22:50:1 Digitize the polyline points in the viewer. 9/1/2019 22:50:3 Digitize the polyline points in the viewer. 9/1/2019 22:50:5 Digitize the polyline points in the viewer. 9/1/2019 22:50:6 -------------------------------- Ending function Create Polyline 9/1/2019 22:54:28 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:54:30 Object: \02-Funciones CAD\02_Densify.msr 9/1/2019 22:54:30 Selected 1 polylines with 2 total points. 9/1/2019 22:54:35 -------------------------------- Starting function Densify Polylines 9/1/2019 22:54:35 Select polyline/polygon to densify and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:54:40 Select polyline/polygon to densify and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:54:50 Preview shows densify added 3 nodes. 9/1/2019 22:54:51 Densify added 3 nodes. 9/1/2019 22:54:51 Select polyline/polygon to densify and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:54:53 -------------------------------- Ending function Densify Polylines 9/1/2019 22:55:3 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:55:9 Object: \02-Funciones CAD\02_Densify.msr 9/1/2019 22:55:9 Selected 1 polylines with 5 total points. 9/1/2019 22:55:9 -------------------------------- Starting function Minimum Distance Between Elements 9/1/2019 22:55:9 Pick two polylines to measure minimum distance. Click right to finish. 9/1/2019 22:55:15 Min. distance btw. point - point: 172.263 m. 9/1/2019 22:55:19 Min. distance btw. point - point: 172.263 m. 9/1/2019 22:55:22 Min. distance btw. point - point: 172.263 m. 9/1/2019 22:55:25 -------------------------------- Ending function Minimum Distance Between Elements 9/1/2019 22:55:33 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:55:36 Object: \02-Funciones CAD\02_Densify.msr 9/1/2019 22:55:36 Selected 1 polylines with 2 total points. 9/1/2019 22:55:39 -------------------------------- Starting function Densify Polylines 9/1/2019 22:55:39 Select polyline/polygon to densify and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:55:45 Preview shows densify added 4 nodes. 9/1/2019 22:55:48 Densify added 4 nodes. 9/1/2019 22:55:48 Select polyline/polygon to densify and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:55:50 -------------------------------- Ending function Densify Polylines 9/1/2019 22:55:53 -------------------------------- Starting function Minimum Distance Between Elements 9/1/2019 22:55:53 Pick two polylines to measure minimum distance. Click right to finish. 9/1/2019 22:55:56 Min. distance btw. point - point: 82.800 m. 9/1/2019 22:56:0 Min. distance btw. point - point: 200.000 m. 9/1/2019 22:56:3 Min. distance btw. point - point: 200.000 m. 9/1/2019 22:56:5 Min. distance btw. point - point: 200.000 m. 9/1/2019 22:56:8 Min. distance btw. point - point: 200.000 m. 9/1/2019 22:56:10 -------------------------------- Ending function Minimum Distance Between Elements 9/1/2019 22:58:41 Select elements in Viewer. Click right to complete selection. (Hold Shift to unselect elements, hold Ctrl to select across folders.) 9/1/2019 22:58:43 Object: \02-Funciones CAD\02_Densify.msr 9/1/2019 22:58:43 Selected 1 polylines with 2 total points. 9/1/2019 22:58:46 -------------------------------- Starting function Densify Polylines 9/1/2019 22:58:46 Select polyline/polygon to densify and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:58:51 Preview shows densify added 4 nodes. 9/1/2019 22:58:52 Densify added 4 nodes. 9/1/2019 22:58:52 Select polyline/polygon to densify and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 22:58:54 -------------------------------- Ending function Densify Polylines 9/1/2019 22:58:56 -------------------------------- Starting function Minimum Distance Between Elements 9/1/2019 22:58:56 Pick two polylines to measure minimum distance. Click right to finish. 9/1/2019 22:59:0 Min. distance btw. point - point: 65.602 m. 9/1/2019 22:59:5 Min. distance btw. point - point: 200.000 m. 9/1/2019 22:59:7 Min. distance btw. point - point: 200.000 m. 9/1/2019 22:59:9 Min. distance btw. point - point: 200.000 m. 9/1/2019 22:59:10 -------------------------------- Ending function Minimum Distance Between Elements 9/1/2019 23:12:38 1 Geometry object created. 9/1/2019 23:13:26 New polyline destination: <03_S�lido> 9/1/2019 23:13:26 -------------------------------- Starting function Create Polygon 9/1/2019 23:13:26 Digitize the polygon points in the viewer. 9/1/2019 23:13:34 Digitize the polygon points in the viewer. 9/1/2019 23:13:40 Click on elements in viewer to query. Click right when finished. 9/1/2019 23:14:45 -------------------------------- Ending function Create Polygon 9/1/2019 23:14:50 -------------------------------- Starting function Redefine Direction 9/1/2019 23:14:50 Select polyline/polygons to redefine and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 23:16:7 Preview shows direction redefined for 1 of 1 polylines/polygons. 9/1/2019 23:16:9 Preview shows direction redefined for 0 of 1 polylines/polygons. 9/1/2019 23:16:14 Preview shows direction redefined for 0 of 1 polylines/polygons. 9/1/2019 23:16:15 The direction was redefined on 0 of 1 polylines/polygons. 9/1/2019 23:16:15 Select polyline/polygons to redefine and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 23:16:17 -------------------------------- Ending function Redefine Direction 9/1/2019 23:19:3 -------------------------------- Starting function Extrude 9/1/2019 23:19:3 Select polyline to extrude and/or expand. 9/1/2019 23:19:47 -------------------------------- Ending function Extrude 9/1/2019 23:21:10 -------------------------------- Starting function Extrude 9/1/2019 23:21:10 Select polyline to extrude and/or expand. 9/1/2019 23:22:7 -------------------------------- Ending function Extrude 9/1/2019 23:24:41 Click on elements in viewer to query. Click right when finished. 9/1/2019 23:28:48 Select solid from viewer. 9/1/2019 23:28:55 Sorting solid faces. 9/1/2019 23:28:55 Computing volume/block partials. 9/1/2019 23:28:56 Integrated volume for 1 solid(s): 250,021,482.63 cubic meters 9/1/2019 23:28:56 Tonnage = 525,045,113.52 tonnes 9/1/2019 23:34:11 1 Geometry object created. 9/1/2019 23:34:52 New polyline destination: <01_Inclinado> 9/1/2019 23:34:52 -------------------------------- Starting function Create Polyline 9/1/2019 23:34:52 Digitize the polyline points in the viewer. 9/1/2019 23:35:8 Digitize the polyline points in the viewer. 9/1/2019 23:35:10 -------------------------------- Ending function Create Polyline 9/1/2019 23:37:27 -------------------------------- Starting function Attach Template 9/1/2019 23:37:28 Select polylines on which to attach template and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 23:37:54 1 shell(s) created. 9/1/2019 23:37:54 Select polylines on which to attach template and click right to end selection. (Shift-click to unselect, Ctrl-A to select All, Ctrl-U to Unselect all) 9/1/2019 23:38:25 -------------------------------- Ending function Attach Template 9/1/2019 23:41:17 Click on elements in viewer to query. Click right when finished. 9/1/2019 23:43:1 1 Geometry object created. 9/1/2019 23:44:36 Select first group of solids. Click right to finish. 9/1/2019 23:44:40 Select second group of solids. Click right to finish. 9/1/2019 23:47:14 Click on elements in viewer to query. Click right when finished.