The document provides information to check the safety of a column section under an axial compressive load of 18 kilonewtons. It specifies the column's dimensions, material properties, and calculates the section's area, section modulus, and slenderness ratio. Based on these values and the yield strength of steel, it determines the allowable compressive load is 38.43 kilonewtons, exceeding the actual load, therefore the section is deemed safe.
The document provides information to check the safety of a column section under an axial compressive load of 18 kilonewtons. It specifies the column's dimensions, material properties, and calculates the section's area, section modulus, and slenderness ratio. Based on these values and the yield strength of steel, it determines the allowable compressive load is 38.43 kilonewtons, exceeding the actual load, therefore the section is deemed safe.
The document provides information to check the safety of a column section under an axial compressive load of 18 kilonewtons. It specifies the column's dimensions, material properties, and calculates the section's area, section modulus, and slenderness ratio. Based on these values and the yield strength of steel, it determines the allowable compressive load is 38.43 kilonewtons, exceeding the actual load, therefore the section is deemed safe.
Effective length of column in x direction 1 mtr Effective length of column in y direction 1 mtr yield stregth of stee 310 n/mm2 PROVIDE SECTION PROVIDE SECTION = 32x32x2 AREA (A) = 2.3 cm2 = 230 mm2 rx = 1.21 mm = 12.1 mm ry = 1.21 mm = 12.1 mm ZX = 2.1 ZY = 2.10 Slender ration in x direction 82.64 slender ration in y direction 82.64 Maximum slenderness ratio 82.64 MAXIMUM Fibre stress 167.07 N/MM2