“D> pressure
“pipe sampler
HEATH & SHERWOOD Model PPHNB Inline Series
Continuous Sampling from Typical application:
Pressurized Horizontal Pipes On-Stream Analyzer Feed from
Pumped Final Tailing Lines
Sample Connections Sample Out
removable rubber lined
‘sample nozzle
computer modelling for
sizing each nozzle to
Sample Extracted fom he application
Middle of Flow
Process Flow
In from Pump
Rubber Lined
Inner Surface Process
= prevents wear Flow Out
“hot vulcanized process ;
preventing separation of ‘Process Connection
rubber from metal surface + installs on a horizontal
special ining materials process pipe near pump
ae avilable discharge where flow
is turbulent
* #150 flanged or Vietaulic
cut grooved connectionspressure
pipe sampler
cD)
a SEROOD
Model PPHNB Inline Series
specifications dimensions
B soninal weit est)
“hie model tanged groove
js iches) sm tea) st
a 5 PPHNBOS 2-8 48 (848)
Frnt aE
a 7 Prna 6)
PRB 7H
(FP
PP
ie Fema
‘T Nozzte
= 3/4, 1,1 1/4, 1 1/2 oF 2 inch dia.
2 manual or automatic 2-way
water flush system
(optional)
3 inlet pressure to sampler
psi Pa)
* customer to supply:
- inlet pressure to sampler
(must be less than 100 psi or 689.5 KP)
~ sample elevation (SH) in ft or m
= process line elevation (PH) in ft or m
~ sample pipe run (SR) in ft or m
»
PHN
typical installation
2% SLOPE MINIMUM
‘SAMPLE PIPE RUN (SR)
SAMPLE
SECONDARY SAMPLER
DIVERTER
MULTIPLEXER,
ANALYZER.
BOOSTER PUMP
sity +o
3971000mm]
inftorm
PROCESS PIPE ELEVATION (PH) in ftorm
SAMPLE LINE ELEVATION (SH) in ftorm
NoTE:
SAMPLE LINE ELEVATION (SH)
PROCESS LINE ELEVATION (PH)
isHePH)
CINEMA
raocess [red oMMENDED)
Heath & Sherwood (1964) Limited Tel. (705) 567-5313.
Box 340 Krkand Lake, Ontario Fax. (705) 568-8545
Canada P2N 312 Toll Free in North America:
41 888-go sample (467-2675)
ema
info@heathandsherwood64.com
Subsidiary Offices:
Toronto, Onlario Canad
Agents World Wide
Visit our website at:
www.heathandsherwood64.com