Philippine National Standard (PNS) 49:2002-
Steel Bars for Concrete Reinforcement:
Specification
Definition
‘A deformed see! bor, has surface deformation oflogs
‘or partrusions that resulted from hot rolling,
Se (rm) walang
[ [xw_s0iwf 7 J
Lg (etn)
Scope
‘This standard species the requirements for deformed
steel bars for concrete reinforcement. ft apples t0
Steel bars manufactured from prime billets oF ignts,
supplied a rolled o hot rolled, with subsequent
‘quenching and self tempering.
‘Sic grades of stee! bars are defined, namely Grades
230,275,415, 2300, 275W and 415W.
Usage
A steel baris a structural tee that i used as concrete
Feinforcement in residential, commercial and
Industral bullaings and structures
BPS Certification Scheme
Under the Bureau of Philippine Standards’ Product
Certification Scheme, PNS 43:2002. and its
amendments is included in the list of PNS for
‘mandatory centfiation,
‘Alllocaly:produced and imported deformed steel bars
covered by the PNS 49:2002 by the PNS 49:2002 and
their successor standards are under mandatory
certification.
"Only manufactures and importers that meet the
requirements of PNS 49:2002 shal be issued 2 PS
Tense or an ICC certificate, Upon issuance, the
manufacturer and importer should ensure: that
their steel bars bear the minimum marking
requirements ofthe Philippine National Standard
1+ As such, manufacturers and importers ofloally
‘manufactured and imported deformed stel
bars, shall seek for approval of their logos and
subsequently apply for the PS license or ICC
Cenifeate.
Essential attributes to be checked
‘The folowing physical attabutes of steel bars shall be
verified:
1+ Requisite markings
+ Actual fullength
+ Actual mass per meter
+ Facities of those mentioned above
+ Mechanical Properties
+ Chemical Properties
Marking
‘All deformed steel bars hall have 2 clearly embossed
‘manufacturer's identifying mark (ogo) as well asthe bar
sae accordance with the PNS requirements
+ The company logo shall be registered withthe BPS
and the registration shall be current and vali,
How to conduct actual mass per meter test
"+ Weigh each indvidval sample up to three decimal
places in ilogram units.
+ Compute the mass per meter by dividing the actual
weight ofeach sample by ts actual length rounded
tothree decimal places.
+ Compute the average mass per meter forthe ten
(20) samples
‘+ Themass per meter should have an average valve
that Iswithin the range specified in the Table,
Allowable variation in mass per meter
Size, Alowabie| Nominal | Aceptabie ange ord
mmm Tolerence anit meterlengt,
smassper
Tain
Min | Max
10 «6% | 067 | asm 0682
BR vhom ose | ams | 090
16 sh 6% | ism | iam | 1678
206% | 2486 | 2518 | 2609
25 6% | 3883 | 362 | 4005
7 + 6% gm) ase | 5322
mee) 631s | sem | 6692
36 w6% | 790 | 7511 | 8470
wo hm | 9865 | 9273 | 10486
50 wom | 15413 | 14ase | 16338
Length Tolerance
Note
For every additional 1m or fraction thereof add
Sm (0.005mm) to + 4Omam (0.040 mm) But not
exceeding 60mmChemical Composition, Percent, Maximum
oe] aa
0.06% MaxS and 0.06% max are allowed provided that
‘mechanical property requirements ae met
‘Carbon equivalent est oppies to lade analysis ony
‘Addon tolerance strlen
ass | __ Chemical composton Max
ox | om | em | mene | i
Feu Ns ,
= 0325 roars
ib) oc | soos | oon] soos | oas
Note
CE lscarbon equivalent and applies forladle analysis
Gade Symbol
230 No dash
as 1
a5 7
Now Non - Weldabie Bar
w Weldabe Bar
Note:
Dash (parallel to the rib) or the grade number itself
Non-weldable bar alsa refers to regular bar
Color Codes painted on the surface ends of each bar
may also be Used
“Grade Color
Grade 230 White
Grade 275 Yellow
Grade ais Green
Weldable Grade Red
‘Quenched & Tempered Silver
Note:
For Re-rolied Steel Bars, Deformed Steel Bars and
Equal Leg Angle Bars in lieu ofthe ICC stickers and PS
mark the approved logo shall be used by the
manufacturer and importer
I As of June 2017, there are 59 Approved |
| Logos for Deformed: Stee! Bars intended 4
1, {01S Application and 66 Approved Logos
Intended for ICC Certification. 1
| cor the complete list, you may visit the aps |
1 Foratatwnntpedtigov ph,
DEFORMED STEEL BARS FOR
CONCRETE REINFORCEMENT
PNS 49:2002
BUREAU OF
PHILIPPINE
i STANDARDS