Professional Documents
Culture Documents
Proven products…
you can put through the grind
DEBURRING
DEBURRING SUPERFINISHING
SUPERFINISHING DE
DE -- SCALING/
SCALING/ GRINDING
GRINDING &&
CLEANING
CLEANING FINISHING
FINISHING
3M, USA, is a $23 Billion, diversified , technology driven company known for it's
innovation across the world with leading positions in a broad range of markets. Over
100 years ago, we introduced the first abrasive (sandpaper), to the world. Today, we
market around 72,000 products world-wide in about 140+ countries and own more
than thirty technology platforms.
3M India Ltd is the Indian arm of 3M™ and has been in the country for the last 16 years,
marketing around 2400 products in India with leading positions in Industrial markets,
Healthcare, Transportation, Consumer & Office, Display & Graphics, Safety, Security
and Protection Services, Electronics & Communications.
2
Deburring
3
Scotch-Brite™ Wheels
Scotch-Brite™ Wheels:
• Improve surfaces without significantly changing the shape
or dimension of the workpiece
• Are well-suited for cleaning, blending, deburring, finishing
and polishing
• Help prevent undercutting or gouging through their
controlled abrasive action
• Provide consistent, uniform finishes as fresh abrasives
are continually exposed to the work surface
• Run cool and resist loading due to their open web
construction, reducing the risk of part discoloration and
warping while extending the life of the wheel
4
Factors to consider when choosing a starting point Selecting convolute vs. unitized
for your application: This choice will often be dictated by the part configuration,
• Composition of workpiece and material type wheel size availability, tool speed, or other fixed
• Material hardness circumstances.
• Desired results to be achieved Convolute is a wrapped construction on a standard sized core.
• Size and shape of the work piece–area to be conditioned The "flat" of the web becomes the cutting tool. The wheels are
• Part variability one directional– indicated by an arrow on the side of the wheel
• Tool/machinery type, including speed capability and arrows printed in the core.
• Previous and possible subsequent abrasive steps Unitized is a layered construction with a selection of center
hole sizes and no core. The “edge” of the web becomes the
Scotch-Brite™wheels can show value when cutting tool. The wheels are non-directional.
replacing:
• Steel wool Basic performance differences:
• Conventional coated abrasives
• Hand files • Grade for grade– Convolute will tend to produce a finer
• Carbide burrs finish; unitized will be more aggressive and durable.
• Hand knives and scrapers • Density– The number may be the same (i.e. 6 density) but
• Sand blasting the unitized wheel will always act harder and be less
• Wire brushes conformable.
• Tampico and bristle brushes • Wheel size availability is often a factor when making this
• Buffs and compounds selection.
• Rubber bonded wheels • Convolute wheel selection is 4"-24" diameter, 1/2"-36"
• Set-up wheels wide. Exceptions depend on product type. Refer to the
specific description page for availability.
• Unitized wheel size selection is 1/2"-14" diameter and from
1/8"-1" wide. Exceptions depend on product type.
LOWER
LESS EDGE SOFTER FINER
AGGRESSIVE DURABILITY WHEEL SCRATCH
5
* Scotch-Brite™ brand
Scotch-Brite™ EXL, EX2, EX3 Deburring and Finishing Wheels
Mineral
Product Density Grade
Type
Name
Mandrel 936
2-1/16" x 1/4" x 3/4" 5
Plastic
Max RPM 22,200
Mandrel 946
1-3/4" x 1/4" x 1/2" 5
Steel
Mandrel No. 936 & 946 Mandrel No. 990 Max RPM 35,200
Mandrel 990
1-3/4" x 1/4" 5
Max RPM 18,200
with 3" wheel
For use with 6" wheels. Reduces 1" inside diameter cores,
flanges, or wheels to fit shafts smaller than 1".
Min./
OD x ID
Case
Mineral
Product Density Grade
Type
Name
Widths: NA
Mineral
Product Density Grade
Type
Name
8
Scotch-Brite™ Cutting and Polishing Unitized Wheels
Mineral
Product Density Grade
Type
Name
Mineral
Product Density Grade
Type
Name
9
Scotch-Brite™ General Purpose Unitized Wheels
Mineral
Product Density Grade
Type
Name Diameters: 1/2" minimum 14" maximum
General 3, 5, 7 Silicon Carbide ULF Widths: 1/4", 3/8", 1/2", 5/8", 3/4", 1"
Purpose 3, 5, 7 Silicon Carbide SFN 1" maximum all diameters
Unitized 3, 5, 7 Aluminum Oxide
Wheels & Silicon Carbide VFN
Typical •Fine thread polishing
3, 5, 7 Aluminum Oxide
applications: •Mold polishing
& Silicon Carbide FIN
•Jewelry polishing
3, 5, 7 Aluminum Oxide
•Polishing turbine blades
& Silicon Carbide MED
3, 5, 7 Aluminum Oxide CRS
Scotch-Brite™ SF Finishing & Deburring Wheel for Cast & Forged Parts
Size Grade
8S FIN
6" x 1/2" x 1" 8S MED
Max RPM 6,000 11S FIN
11S MED
8S FIN
10
Factors Affecting Performance
Unitized Wheels
Maximum Operating Speeds (RPM)
Size BP-UW CS-UW CP-UW XL-UW XL-UW XL-UW GP-UW ST-UW ST-UW MF-UW
(Diameter 2S, 3S 2A, 4A XCS 4, 6, 8 3 5, 7
x Width) Except 4A XCS
Less than 1” 40,100 40,100 40,100 35,100 30,100 40,100 35,100 40,100 40,100 --
1" x All 35,100 35,100 35,100 30,100 25,100 35,100 30,100 35,100 35,100 35,100
11⁄2" x All 30,100 25,100 30,100 20,100 18,100 30,100 20,100 25,100 30,100 25,100
2" x 1⁄4"-1⁄2" 24,100 20,100 22,100 16,100 16,100 22,100 16,100 20,100 22,100 18,100
2" x 3⁄4"-1" 24,100 20,100 22,100 16,100 14,100 22,100 16,100 18,100 22,100 18,100
21⁄2" x 1⁄8" 22,100 -- 20,100 -- -- 20,100 12,500 -- 20,100 15,100
21⁄2" x 1⁄4" 22,100 16,100 20,100* 14,100 14,100 20,100 12,500 18,100 20,100 15,100
21⁄2" x 3⁄8" 22,100 16,100 20,100 14,100 12,100 20,100 12,500 18,100 20,100 15,100
21⁄2" x 1⁄2" 22,100 16,100 18,100* 14,100 12,100 18,100* 12,500 18,100 18,100 15,100
21⁄2" x 3⁄4-1" 22,100 16,100 18,100* 12,500 10,000 18,100 12,500 15,100 18,100 15,100
3" x 1⁄8" 18,100 -- 18,100 -- -- 18,100 10,000 -- 18,100 12,500
3" x 1⁄4" 18,100 14,100* 18,100 12,100 12,100 18,100 10,000* 14,100 18,100 12,500
3" x 3⁄8" 18,100 14,100 18,100 12,100 10,000 18,100 10,000 14,100 18,100 12,500
3" x 1⁄2" 18,100 18,100 15,100* 10,000 10,000 15,100* 10,000* 14,100 15,100* 12,500
3" x 3⁄4"-1" 18,100 14,100 15,100* 10,000 9,000 15,100 10,000* 12,500 15,100 12,500
4" x 1⁄8"-1⁄2" 14,100 10,000 12,100 8,500 8,000 12,100 8,000 10,000 12,100 9,000
4" x 3⁄4"-1" 14,100 10,000 12,100 8,000 7,000 12,100 8,000 9,000 12,100 9,000
5" x All 12,100 8,000 9,000 6,000 5,500 9,000 6,000 7,500 9,000 7,500
6" x All 10,000 7,000 7,500 5,000 4,500 7,500 5,000 6,000 7,500 6,000
7" x All 8,000 6,000 6,000 4,500 4,000 6,000 4,500 5,000 6,000 5,000
8" x All 7,000 5,000 5,500 4,000 3,500 5,500 4,000 4,500 5,500 4,500
9" x All 6,000 4,500 5,000 3,500 3,000 5,000 3,500 4,000 5,000 4,000
10" x All 5,000 4,200 4,500 3,200 2,800 4,500 3,200 3,750 4,500 3,750
11" x All 4,500 3,800 4,000 2,900 2,500 4,000 2,900 3,400 4,000 3,400
12" x All 4,000 3,500 3,750 2,600 2,300 3,750 2,600 3,100 3,750 3,100
13" x All 3,500 3,200 3,450 2,400 2,100 3,450 2,400 2,800 3,450 2,800
14" x All 3,200 3,000 3,200 2,200 2,000 3,200 2,200 2,650 3,200 2,650
15" x All 3,000 -- -- -- -- -- -- -- -- --
16" x All 2,800 -- -- -- -- -- -- -- -- --
17" x All 2,600 -- -- -- -- -- -- -- -- --
18" x All 2,500 -- -- -- -- -- -- -- -- --
19" x All 2,300 -- -- -- -- -- -- -- -- --
20" x All 2,250 -- -- -- -- -- -- -- -- --
12
3M™ Bristle Products are abrasives that make deburring, blending,
finishing, polishing and cleaning surfaces easier than ever before. They
have been designed to deliver high quality finish and performance -
with the added advantage of a safer operating environment.
3M™ Bristle Products
3M Radial Bristle Discs (curved, thin)
Size Grade Colour MOS (rpm)
3M Mandrel, 3/32" shank x 1/16" screw Comes with 9/16" & 3/4"discs
3M Mandrel, 1/8" shank x 1/16" screw Alternate to 27680
3M Mandrel, 1/4" shank x 1/16" screw Alternate to 27680, 27682
3M Mandrel, 3/32" shank x 1/16" screw Comes with 9/16" & 3/4"discs
3M Mandrel, 1/8" shank x 1/16" screw Alternate to 27680
3M Mandrel, 1/4" shank x 1/16" screw Alternate to 27680, 27682
3M Mandrel #990, 1/8"- 1/2" wide For both 2"& 3" discs
3M Mandrel #991, 3/4"- 1" wide For both 2"& 3" discs
3M Roloc + Holder 1”
No. 7Roloc + Button Plastic buttons(red) and
mandrels for 2 and 3" discs
Tapered spindle adaptor,1/16" - 1/2" wide For use on bench motors
with tapered spindle shaft 13
3M Radial Bristle Disc (curved, thin)
Size Grade Colour MOS (rpm)
3M Mandrel #990, 1/8"- 1/2" wide For both 2"& 3" discs
3M Mandrel #991, 3/4"- 1" wide For both 2"& 3" discs
3M Roloc + Holder 1”
No. 7Roloc + Button Plastic buttons(red) and
mandrels for 2 and 3" discs
Tapered spindle adaptor, For use on bench motors
1/16" - 1/2" wide with tapered spindle shaft
3M Mandrel #990, 1/8"- 1/2" wide For both 2"& 3" discs
3M Mandrel #991, 3/4"- 1" wide For both 2"& 3" discs
3M Roloc + Holder 1”
No. 7Roloc + Button Plastic buttons(red) and
mandrels for 2 and 3" discs
Tapered spindle adaptor, For use on bench motors
1/16" - 1/2" wide with tapered spindle shaft
15
3M Bristle Disc (right angle grinder)
Size Grade Colour MOS (rpm)
3M Mandrel #990, 1/8"- 1/2" wide For both 2"& 3" discs
3M Mandrel #991, 3/4"- 1" wide For both 2"& 3" discs
3M Roloc + Holder 1”
No. 7 Roloc + Button Plastic buttons(red) and
mandrels for 2 and 3" discs
3M Mandrel #990, 1/8"- 1/2" wide For both 2"& 3" discs
3M Mandrel #991, 3/4"- 1" wide For both 2"& 3" discs
3M Roloc + Holder 1”
No. 7 Roloc + Button Plastic buttons(red) and
mandrels for 2 and 3" discs
3M SR Cutter (Aerospace)
80
Aluminum Oxide Conventionally graded
40 Microns abrasives on
Percent of Volume
60
cloth backing
40
Aluminum Oxide Micron graded
320 Mesh
20 abrasives on
film backing
0
2 4 7 10 20 40 70 100 200
Diameter, Microns
Microfinishing enables you to correct geometry and obtain fine Centerless microfinishing plunges the workpiece into the abrasive to
finishes (as low as 1 to 2 micro inches or 0.025 to 0.05 £gm Ra). remove stock or provide a polished finish.
Notation: 3M™ Microfinishing Film is shown abrasive side up, product reads correctly from the back side.
3M™ Flexible Diamond Belts allow you to 3M™ Microfinishing Film is a fast cutting
achieve better finishes without sacrificing cut abrasive that can produce consistent,
rates on hard to grind roll materials. A metal predictable and repeatable high quality
bond securely anchors micron graded finishes on roll surfaces. This abrasive utilizes
diamonds to our premium, flexible backing. It precision micron graded mineral particles that
offers durability and longer life while allowing are electrostatically oriented, then resin-
conformance to a variety of contours. The bonded to a polyester film backing to give an
open dot pattern produces aggressive cutting aggressive cut with a uniform finish. Available
action and reduces grinding loads. Especially in 9-100 micron grades. sprays or ceramics.
designed for use on rolls harder than 55-60
Rockwell C such as chilled iron, forged steel,
thermal sprays or ceramics.
20
3M™ Lapping Film 3M™ Diamond Lapping Film
3M™ Lapping Film is a premium, precision 3M™ Diamond Lapping Film offers a
abrasive that produces super-fine, super- repeatable, precision
consistent Ra finishes on rolls made of a finish on a variety of hard materials such as
variety of metals, plastics and rubber. A high tungsten carbide, thermal or plasma sprayed
strength polyester backing provides a uniform ceramics, (chrome oxide and aluminum oxide)
base for a coating of micron graded mineral glass, stone and some hardened, high carbon
particles. A carefully controlled resin bond ferrous metals. It combines micron graded
ensures a consistent, predictable and diamond particles, a tough resin bonding
repeatable finish. Available in 0.3-60 micron system and a highly uniform polyester film
grades. backing to produce high quality finishes,
consistently, predictably and economically on
harder roll surfaces. Available in 0.1-45 micron
grades.
21
3M film-backed and flexible diamond abrasives for tough markets.
All 3M film-backed and flexible diamond abrasives provide a predictable, consistent and repeatable finish for all types of
industries, including: steel mills, aluminum mills, film extruders, decorative stainless, paper mills, textiles, printing industry,
copper foil electrodeposition and other non-roll applications. 3M film-backed and flexible diamond abrasives are ideal for roll
finishing on tungsten carbide, chilled iron, forged steel, chrome plating, stainless steel, rubber, nylon, copper, brass, tool
steel, aluminum, epoxy, thermal spray ceramics, tungsten carbide, nickel, polyurethane, ceramics and more.
Clean & Strip 7 Silicon Carbide XCS Typical • Coarse grain finishing
Rim Wheel applications: • Centerless finishing
• Rust removal
• Light coating removal
4" x 1/2"
Max RPM 6,000 SXCS 25
24
Scotch-Brite™ High Strength Discs
(Aluminum Oxide)
Very conformable discs, ideal for light deburring, cleaning,
and finishing.
Dia x
Min./
Centre Grade
Case
Hole
Accessories - Mandrels
Length x
Min./
Shank x Catalog
Case
Washer Dia No.
25
Scotch-Brite™ Surface Conditioning Discs (Hook & Loop)
Min./
Diametre Grade
Case
ACRS 10
ACRS 50
4-1/2" AMED 10
Max RPM 13,000 AMED 50
AVFN 10
AVFN 50
ACRS 10
ACRS 50
5" AMED 10
Max RPM 10,000 AMED 50
AVFN 10
AVFN 50
ACRS 10
ACRS 25
7" AMED 10
Max RPM 6,000 AMED 25
AVFN 10
AVFN 25
Coated Abrasive
Mineral Type Grade
Grade Equivalent
Min./
Item Dia. x Thread
Case
26
Scotch-Brite™ Hand Pads
Colour/ Pads/
WxL
Grade Case
Min./
WxL Grade
Case
A MED 1/3
4" x 30' A FIN 1/3
AVFN 1/3
S VFN 1/3
A MED 1/2
6" x 30' A FIN 1/2
AVFN 1/2
Colour/ Min./
LxW
Grade Case
Use with desired Scotch-Brite™ strips to clean and polish 3-1/2" x 4-3/4" 10
other tight areas. Mandrel has a 1/4" shank to fit desired tool.
Min./
L x Dia.
Case
2-7/8" x 1/4" 5
Max RPM 14,000
27
3M™ Evenrun™ Bands
28
ACCESSORIES
Min./
Dia. x W x Shaft
Case
Min./
Dia. x W x Shaft
Case
29
3M™ Cartridge Rolls 241D (Aluminum Oxide – X Wt. Cloth)
Min./
Dia. x L x CH Grade
Case
ACCESSORIES
Cartridge Rolls
3M Mandrels
30
Scotch-Brite™ Surface Conditioning Belts
Min./
WxL Grade
Case
Min./
Dia. x W x Shaft Grade
Case
31
32
3M™ Cloth Belts 577F
3M 577F is a premium aluminum zirconia mineral coated on a
durable polyester backing. This high performance belt is
designed for grinding stainless steel and nickel alloys in
applications requiring low to moderate pressure. If you’re
looking for high performance and productivity, 3M 577F will
reduce your process time and give you more parts per shift.
You will find this product to provide superior cut rates and life.
Size Grade
Custom P36
Sizes P60
P80
P120
Trizact™ abrasive belts last up to five times longer than Trizact™ Abrasive
conventional belts, making them very cost effective.
Test results verify that:
• Trizact™ abrasive belts last 2-5 times longer than
conventional belts Conventional Abrasive
• Operators can reduce grade sequences, which in turn
lowers abrasive costs Time
While its initial cut is not as high, 3M™ Trizact™ Abrasives maintain
their high rate of cut much longer in comparison to conventional
Reduced operator fatigue. abrasives on 304 Stainless Steel.
Because Trizact™ abrasives maintain a higher cut rate for
the life of the belt, they’re less tiring to use. Operator applies
even pressure throughout the life of the belt, reducing
Finish (micro-inches)
Trizact™ Abrasive
operator fatigue and minimizing the frequency of overcutting.
Lower is finer.
The unique construction of Trizact™ abrasives requires a different grading system. Grade is defined by the average
particle size in microns and begins with an “A.” Trizact™ abrasive belts are available in grades A5 through A160 in
widths up to 26 inches. The Table below shows the Trizact™ abrasive grade comparison to conventional abrasive
grades. As you can see, the lower the A-grade, the finer the grade.
A5 P3000
A6 P2500
A10
A16 P1200
P800
A20
A30
A35 P600
A45 P400
P320
A60
A65
P240
A80
A90 P220
A100
A110 P180
A130 P150
A160 P120
34
3M™ Fibre Discs – 381C (Aluminum Oxide - Fibre)
24 100
4" x 3/4” 36 100
Max RPM 50 100
13,300 60 100
80 100
120 100
24 25
36 25
5" x 7/8" 50 25
Max RPM 60 25
12,000 80 25
100 25
120 25
24 25
36 25
7" x 7/8" 50 25
Max RPM 60 25
8,600 80 25
100 25
120 25
24 25/100
5" x 7/8" 36 25/100
Max RPM 12,000 50 25/100
80 25/100
24 25/100
7" x 7/8" 36 25/100
Max RPM 8,600 50 25/100
60 25/100
80 25/100
24 25/100
36 25/100
50 25/100
4-1/2" x 7/8" 60 25/100
Max RPM 80 25/100
13,300 100 25/100
120 25/100
24 25/100
36 25/100
50 25/100
5" x 7/8" 60 25/100
Max RPM 80 25/100
12,000 100 25/100
120 25/100
24 25/100
36 25/100
50 25/100
7" x 7/8" 60 25/100
Max RPM 80 25/100
8,600 100 25/100
120 25/100 35
Accessories – Fibre Discs
Plastic hubs with 5/8" – 11 metal insert. Use with disc pad
face plates.
Min./
Size
Case
2-1/2" 1/10
Use with all size face plates
4-1/2" 1/10
Use with 7" face plates only
2-1/2" 1/10
Use with all size face plates, tool shaft length 1/2" or less
Backup plates for fibre discs. 3M disc pad face plates are
color coded by density.
• Ribbed plates result in cooler running discs
• Use harder face plates for heavier stock removal
applications
Min./
Depth
Case
3/8" 1
1/2" 1
5/8" 1
4-1/2" x 5/8" – 11 1
Use with 7" only.
Disc Holder Adaptor No. 9
Min./
Thread Size
Case
Min./
Dia. x Thk x AH Grade
Case
Min./
Dia. x AH
Case
Grade
Dia.
4”
(4mm, 6mm thk) 24
5”
(6mm thk) 24
7”
(6mm, 7mm thk) 24
9”
(6mm thk) 24
37
3M™ Flap Disc 747D (3M Cubitron™ Abrasive Grain – Type 27)
Min./
Dia. x Ctr Hole Grade
Case
36 10
4-1/2" x 7/8" 50 10
Max RPM 13,300 60 10
80 10
P120 10
36 5
7" x 7/8" 50 5
Max RPM 8,600 60 5
80 5
P120 5
Min./
Dia. x Ctr Hole Grade
Case
P36 10
4-1/2" x 7/8" P40 10
Max RPM 13,300 P60 10
P80 10
P120 10
P36 5
7" x 7/8" P40 5
Max RPM 8,600 P60 5
P80 5
P120 5
ACCESSORIES
Adapter nut used for securing 4-1/2" diameter flap discs
or 4-1/2" and 7" flexible grinding wheels to right angle Backup plate for 7" diameter type 27 flap discs.
tool with a 5/8" –11 threaded shaft.
Min./ Min./
Thread Size Thread Size
Case Case
38
3M Trizact™ Hookit™ II Film Discs
268XA - Aluminium Oxide
Get your job done faster, with a superior finish using Trizact
film. Trizact film abrasives are produced by microreplication,
a patented 3M technology. Tiny, precisely shaped pyramids
containing micron graded aluminum oxide particles are
reproduced onto a polyester film backing. As the abrasive is
used, the tops of the pyramids wear away, continually
exposing fresh sharp mineral. This ensures a consistent cut
rate through the long life of the Trizact film. For fantastic
results, try it on your next solid surface finishing job.
Micron Case
Disc
Grade Qty.
Size
Micron Case
Disc
Grade Qty.
Size
Accessories
General purpose, 5" and 6" back-up pad for use with 3M’s
patented Hookit II abrasives. Expect longer abrasive and
backup pad life, firmer attachment, less lint and debris for
finer, more uniform finish. Required for use with Trizact
Hookit II dics in solid surface finishing applications.
Provide a fast, efficient method for deburring, blending, 3M Roloc Disc Button
finishing, removing tool marks, and die polishing on all types Color/Grade Chart
of metal. They lock securely in place with just a half twist…
another half twist and they’re off. Each disc is color coded 24
by grade. 36
50
3M™ 777F Regalite™ Polycut™ Resin Bond Cloth YF Wt. 60
3M’s Regalite™ Polycut™ incorporates 3M™ Cubitron™ 80
and premium aluminium oxide minerals on a heavy YF cloth 100
or fibre backing. 120
150
180
Size Min./
Prod. ID
(dia.) Case 240
1/2" 777F 50/500
1-1/2" 777F 50/500
Roloc™ TR Discs 2" 777F 50/200
(Plastic Button) 3" 777F 50/200
4" 785C 25/100
Min./
Diametre Grade
Case
Min./
WxL Grade 9" x 11" 80 50/250
Case 518 100
120
9" x 11" 50 50/500 150
140N 60 50/500 180
80 50/500 220
320
9" x 11" 100 100/1000 400
110N 120 100/1000
150 100/1000
180 100/1000
220 100/1000
Silicon Carbide
414N (A wt. Paper – Open Coat)
Provides exceptional finishes and excellent
conformability for contour sanding.
Min./
WxL Grade
Case
3M™Wetordry™ Sheets
431Q
• Silicon carbide — C wt. Paper. Min./
List W x L Grade
• Heavyweight paper backing for increased durability. Case
42
3M™ Flexible Diamond Products
Min./
Size Grade
Case
3" x 3” M250 10
M125 10
M74 10
M40 10
M20 10
R30 10
R10 10
Surface
Int’l Mesh - ANSI FEPA “P” Micron Diamond Emery Conditioning
12
P 12
P 16
16
P 20
20
P 24
24
30
P 30
36
P 36 Coarse
40
P 40
50
P 50
60 M250/60 Mesh Medium
P 60
P 80
80 180
P 100
100 150 Fine Ex. Coarse
P 120 M125/120 Mesh
120 120 Coarse
P 150
150 100 Medium
180 P 180 80
220 60 M74/200 Mesh
P 220
P 240
240 50 Fine
P 280
P 320
280 40
P 360 M40/400 Mesh
320 Very Fine
P 400
P 500 R30/500 Mesh
360
P 600
400 30
P 800
500 M20/800 Mesh
P 1000 20
600 15 Super Fine
P 1200 12
800 P 2000 9 M10/1800 Mesh
P 2500 5 R10/1800 Mesh
4
1000 3 Ultra Fine
2
1
1200 0.5
0.3
0.1
0.05
1 inch = 25.4 millimetres Please Note: Throughout his catalogue, Scotch-Brite
1 millimetre = 0.99370 inches grades are abbreviated:
1 micron (µ) = 0.000039 inches
ANSI - American National Standards Institute ULF - Ultra Fine MED - Medium
FEPA - Federation of European Producers of VFN - Very Fine CRS - Coarse
Abrasives Products FIN - Fine XCS - Extra Coarse
44
Notes
Notes
3M Innovation Center
Benefits to YOU!
47
3M India Limited
Abrasive Systems Division
Raheja Paramount
138 Residency Road
Bangalore - 560 025
Tel.: +91 80 2223 1414
www.3m.com