8.6.4.6 Secondary relief system for travel
‘The four secondary relief valves (77.1 - 77.4. Fig.
1) for tne track motors are located in the undercar-
nage module.
‘The valves (77.2 & 77.3) are on the rear side of the
housing,
Fig. 1 ‘Secondary rolef valve fortraval
Checking and setting
* Engage the track parking brakes (with toggle
switch) and lower the working equipment to the
ground,
+ De-stroke the main pumps by shifting the
Power control / Eco Set switch to 60 % (see
(Operating instructions)
+ Connect four 400 bar pressure gauges to the
metering points for the pressure relief valves.Fig. 2. Pressure ctor vale
‘¢ Switen oft pressure cut-oft for main pumps (P1
& P2) by shifling the cocks (5, Fig. 2) into post-
tion 0.
+ Runleft hand engine up to top speed.
'¢ Leave the track brakes engaged and summon
“eft-hand lack forwards”. Depress eagle
valve genily into end position.
+ Check pressure on relief valve (77.1, Fig. 1).
¢ It should be: 370 bar Re-set the valve if nec-
essary
‘+ Summon following functions, one after the
other:
LHtrack reverse (valve 77.2)
RH track forwards (valve 7.3)
RH track reverse (valve 77.4)
‘+ and check pressures in the same manner.
'* Affer checking / setting secondary pressures,
Shift cocks for pressure cut-of (5, Fig. 2) back
into postion 1