You are on page 1of 1
2 Theortia Background a Dlubal 2.1.2 Shear De: “The design for shear force resistance is only performed inthe strength mit state. The actions and resistances are considered with their design values. The general design requirement ac- cording to ACI318-14, 11.1.1 is the following weve where v Factored shear force at the section Ve=Vet¥s Nominal shear strength ACI 318-14, £4. (225.1.1) ve Shear strength provided by concrete % Shear strength provided by shear reinforcement =075 Strength reduction factor for shear When the factored load exceeds one-half the shear design strength of concrete, the Code e-

You might also like