Professional Documents
Culture Documents
Install-PNMTj On Windows 7 Stepwise PDF
Install-PNMTj On Windows 7 Stepwise PDF
P ASOLINK
N ETWORK
PNMT (Java version)
Installation Manual
(Windows7)
M ANAGEMENT
T ERMINAL
NEC Corporation
Copyright © 2010
NWD-105324
Table of Contents
-i-
NWD-105324
1. Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings,
-1-
NWD-105324
-2-
NWD-105324
-3-
NWD-105324
(3) Click the Phone and Modem icon in the Control Panel window to start configuring the
modem.
(4) If Location Information window will appear, enter your country and area code and then click
[OK].
-4-
NWD-105324
(6) Select the Modem tab. Click [Add] to continue with adding the new modem for the PNMT.
-5-
NWD-105324
(7) Check Don’t detect my modem ... and click [Next] to continue.
(8) Select Standard Modem Types from the list of Manufacturers and Standard 19200bps
Modem from the Models. Click [Next] to continue.
-6-
NWD-105324
(9) Select Selected ports and COM#, then click [Next] to continue.
-7-
NWD-105324
(11) Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-8-
NWD-105324
(1) From the Start menu, select and click Control Panel.
-9-
NWD-105324
- 10 -
NWD-105324
- 11 -
NWD-105324
(6) Insert the USB driver CD-ROM in the computer’s disk drive and set Search for driver
software in this location and click [Next].
(7) Please wait while processing the search for Driver Software.
- 12 -
NWD-105324
(9) Please wait while installation for USB Modem Driver is in progress.
- 13 -
NWD-105324
NOTE
There is a possibility that the USB connection is dropped
during a long-duration operation depending on the device type
of computer. In the case of a connection failure, please
reestablish the dial-up connection.
- 14 -
NWD-105324
4. Dial-up Setting
(1) Click Start | Control Panel and the Network and Sharing Center icon to start
configuring the Dialup setting.
(2) The Network and Sharing Center window appears. Click Set up a new connection
or network in the Tasks area.
- 15 -
NWD-105324
- 16 -
NWD-105324
- 17 -
NWD-105324
(5) In the New Connection Wizard window, input connection name and Dial-up phone
number field.
Check Don’t connect now... and click [Next].
In case of connecting with RS232C-Type [PNMT(RS232C)]
- 18 -
NWD-105324
- 19 -
NWD-105324
(8) The Network and Sharing Center window appears. Click [Change adapter setting]
in the Connect Dial-up Connection window
(9) Select Connection and Right Click , Appear context menu and select Connection’s
properties.
- 20 -
NWD-105324
(10) In the Properties Window click on the General tab. Click [Configure].
- 21 -
NWD-105324
(12) Retain the default setting on the Options tab and click the PPP Setting.
(13) In the PPP Setting window, uncheck all the boxes. Click [OK] to go back to the
previous window. And click the Security tab.
- 20 -
NWD-105324
(14) Retain the default setting on the Security tab and click the Networking tab.
(15) On the Networking tab, uncheck File and Printer ... and Client for Microsoft...
and Internet Protocol Version 6(TCP/IPv6)
- 21 -
NWD-105324
- 22 -
NWD-105324
(19) In the Advanced TCP/IP Settings window, uncheck Use IP header compression for
the PPP link. Click [OK].
- 23 -
NWD-105324
NOTE
It is necessary to remove SNMP Service or to stop it if it has
already been installed.
- 24 -
NWD-105324
(3) Turn off Simple Network Management Protocol(SNMP) and WMI SNMP
Provider check box, and click [OK].
- 25 -
NWD-105324
6. PNMT Setup
NOTE
If PNMT software has already been installed, please uninstall it
before you install a new version.
(1) Insert the PNMT Installation CDROM. Open the CDROM folder and double-click install.exe.
- 26 -
NWD-105324
(4) Specify the directory in which the PNMT is to be installed. Click [Next].
Restore Default Folder:
Click this button to revert to default path
Choose:
Click this button to select another directory
- 27 -
NWD-105324
NOTE
The default path is C:\PNMTj. It is not possible to include
blank spaces as in “Program Files”. (C denotes the directory
where the currently running OS is installed)
(5) Specify the License Key file if one is available. Click [Next].
Restore Default File:
Click this button to revert to default file
Choose:
Click this button to choose the license key file
NOTE
If no license key file is available, operation in trial mode is
possible.
- 28 -
NWD-105324
- 29 -
NWD-105324
NOTE
In some cases with Windows7, window shown below might
pop-up upon completion of installation. However, please
note that installation is complete without any problem.
- 30 -
NWD-105324
7. Firewall Setup
(1) Go to Control Panel. Click Windows Firewall.
- 31 -
NWD-105324
- 32 -
NWD-105324
- 33 -
NWD-105324
(3) In the Windows Firewall with Advanced Security.Window appears Click Inbound
Rules and New Rule... on Actions.
- 34 -
NWD-105324
(5) Select This program path and Click Browse. Select the pnmt on “PNMTj Install
PATH\bin” Click [Next].
- 35 -
NWD-105324
- 36 -
NWD-105324
(10) Input Name filed and Description field and Click [Finish].
- 37 -
NWD-105324
This section describes the network setting for 5000S. If you don’t wish to connect to 5000S, please
precede directly 10. PNMT Launching
(1) Select Start Control Panel
(2) Select the Network and Sharing Center from the Control Panel window.
- 38 -
NWD-105324
- 39 -
NWD-105324
(4) Select the Network Connections from the Network and Internet Connections window.
Right click the Local Area Connection and select the Properties from the context menu.
(5) The following Local Area Connection Properties window will appear as default.
Select the Internet Protocol Version 4 (TCP/IPv4), then click on the Properties
button.
- 40 -
NWD-105324
(6) The following Internet Protocol Version 4 (TCP/IPv4) Properties window will
appear. Select the Use the following IP Address instead of the Obtain an IP address
automatically. Set the IP address, Subnet mask and Default gateway as follows:
Item Setting
IP Address 172.17.254.254
Subnet mask 255.255.255.252
Default gateway 172.17.254.253
- 41 -
NWD-105324
- 42 -
NWD-105324
(3) Enter User name and Password, and Select the Connection Entry.
After installation of the PNMT, the initial password will be:-
User name: admin
Password: (There is no initial password. Just press Enter.
A password can then be set.)
Connection: In case of connection to 5000S select Ethernet and PNMT
(LAN/Direct) entry.
Otherwise select Dialup and PNMT(RS232C)/PNMT(USB) entry.
- 43 -
NWD-105324
- 44 -
NWD-105324
NOTE
If another application is using the SNMP Port, application
initialization will not be possible; the application will shut
down, and the following message will appear.
- 45 -