Professional Documents
Culture Documents
Choose create a new object button from the top tool chest. The New dialog box will be
displayed; select the assembly radio button from the type.
FIG-6.1
You can enter the name of assembly now click on ok button to create a new assembly
Please notice the all tools in model tab of assembly.
FIG-6.2
Now click on assembly option in model tab at the upper left side
Click or Insert > Component > Assemble> The Open dialog box select the part
and click open
FIG-6.3
FIG-6.4
FIG-6.5
Select the cylindrical surface of shaft
FIG-6.6
FIG-6.7
FIG-6.8
Now select the lower cylindrical surface of your part
FIG-6.9
If your component being fully constrain its mean your assembly is ok
FIG-6.10
FIG-6.12
FIG-6.13
FIG-6.14
Now pick your next part to complete assembly and constrain it same
FIG-6.15
FIG-6.16
50 | P a g e
6.1 MECHANISM
For movement of assembly we have to create joints there are many types of joints
FIG-6.17
Click on assemble.
52 | P a g e
FIG-6.18
FIG-6.19
FIG-6.20
53 | P a g e
FIG-6.21
Now click on pin joint for 360 angle movement of your part
Now click on shaft’s cylindrical surface and the hole surface of base plate as shown in
figure
FIG-6.22
FIG-6.23
54 | P a g e