BORAL Premium Dry Mix USGBORAL
INNOVATION INSPIRED BY YOU.”
remium Dry Mix
Multi Purpose Compound, One Day Application
BORAL Premium Dry Mixis a specially formulated plaster
based, al purpose compound especially designed for
flush jointing plasterboard, internal/external angles and
fastener heads, BORAL Premium Dry Mixis a plaster \
based quick setting compound which enables jointing to
bbe completed ina single day.BORAL Premium Dry Mix
BORAL Premium Dry Mix s a specially formulated plaster based, all purpose compound
‘especially designed for flush jointing plasterboard, internal/external angles and fastener heads.
BORAL Premium Dry Mix s a plaster based quick setting compound which enables jointing to
be completed in a single day,
Product Data
Setting Time Storage
Premium Dry Mix has a setting Premium Dry Mix must be stored under cover in a dry
time of 30 minutes and working environment and protected from temperature extremes.
time of 20 minutes. Storage in an unsuitable environment or once the bag
has been opened can shorten the life span of the product
Mixing Ratio
Coverage
2 parts of compound to 1 part of clean water in kg.
5m? per 20kg bag (based on 3 coats application method)
Re-coat
60 minutes after initial gauge has been mixed.
Shelf Lite
Best before 9 months (from production date)
Mixing
‘Always use clean cold water
and clean containers and tools.
Mix by hand or with a power mixer
(max. of 400rpm) - mixing at higher
‘speeds will draw air into the mix and
‘may affect working time. Mix until a
‘smooth workable paste has been
achieved
2D Using dry contanersiwater
tools may affect setting time
and set strength,
G Once setting has commenced, the
‘material cannot be remixed and
should not be used further. The
inclusion of other materials (e.g
retardants, fillers, etc.) in the mix
will impair the performance of this
product, Le, reduced strength, poor
adhesion and will vold the product
warranty.
Q, Forbost resus slowly ade
powder to water and allow
powder to soak for 1-8 minutes
before mixing
A, Moconty enough compound fr
20 minutes working te,
Applying BORAL Premium Dry Mix (Extemal Angles Application)
First Coat (finished wieth 150mm)
1. Using a 150mm wide broad knife, apply an even coat of Premium Dry Mix to both
side of the external angle. Feather the edges and trowel irish to a smooth state.
Second Coat (finished width 200mm)
2. Once the first coat has completely set, a second coat must be applied USGBORAL s
3. Using a275mm trowel, apply an even coat of Premium Dry Mix approximately SOmm
wider than the fist coat, Feather the edges and trowel fish to a smooth state
Boral Plasterboard
‘Third Coat (finished width 275mm) (Malaysia) Sdn Bhd
4, Once the second coat has completely dried, a thi coat can be applied.
5. Using a 275mm trowel, apply an even coat to both sides of the external angle
approximately 75mm wider than the second coat. Feather the edges and trowel finish Lot 606 of Jatin SST
Head otis:
toa smooth state 27500 Subang Jy
Selangor Daathsan
NOTE: Sanding Walesa
+ 603) 56282000
6. All types of plasterboard joints require light sanding before painting Leeson
ewsgboratcom
204 vse aoe At ASR RSPRED BY Oa ers of 6 Bin Poa oe ar rae ies GBC