Professional Documents
Culture Documents
ROC L6 series is the ideal choice for aggregate or limestone quarrying, but is also well ac-
cepted in mining operations including coal overburden excavation. The rigs comprises main
components such as:
• Crawler type two speed undercarriage with track oscilla- • Hydraulic cylinder operated feed system mounted in a
tion system aluminium box profile feed beam
• Caterpillar turbo charged diesel engines • Toe hole drilling capability, option
• Atlas Copco screw type high pressure compressors • Carousel type tube handling system
• Operator’s cabin, ROPS and FOPS approved with rubber • Break out table
vibration dampers • Hydraulic operated rotary head
• Single section boom system • Built for use with 3”, 4”, and 5” down-the-hole hammers
Hole range
Recommended DTH hammers and hole range
ROC L625 COP 34, COP 44 92 -130 mm 3 5/8”- 5 1/8”
ROC L630 COP 34, COP 44, COP 54, COP 54GE 92 -152 mm 3 5/8”- 6”
Hydraulic tube handling system for max hole depth, with 5 m (16,4’) tubes
ROC L625 and ROC L630 Ø 76 - 102 mm (3” - 4”) drill tubes 45 m 148’’
Single pass drilling, max hole depth
ROC L625 and ROC L630 5,4 m 18’
Specifications ROC L625 and L630
Engine Compressor
ROC L625 ROC L625
Caterpillar turbo charged, diesel engine, CAT C11, Tier III/stage 3 Atlas Copco XRX 10, two stage screw type compressor
• Power rating at 1800 rpm.................... 287 kW 385 HP • Working pressure, max........................ 25 bar 363 psi
ROC L630 • FAD, at normal working pressure........ 295 l/s 625 cfm
Caterpillar turbo charged, diesel engine, CAT C13, Tier III/stage 3 ROC L630
• Power rating at 1800 rpm.................... 328 kW 440 HP Atlas Copco XRX 10, two stage screw type compressor
• Working pressure, max........................ 30 bar 435 psi
Carrier • FAD, at normal working pressure........ 354 l/s 729 cfm
• Tramming speed, max......................... 3.5 km/h 2.2 mph Hydraulic system
• Traction force, max.............................. 166 kN 37 310 lbf
• Track oscillation.................................. ±10° Hydraulic oil cooler
• Ground clearance................................. 405 mm 16’’ • Max ambient temperature.................... 50°C. 122°F
Pumps
Aluminium feed • Axial piston pump (1)..........................275 l/min 73 US gal/min
• Gear pump (2) ....................................117 l/min 31 US gal/min
Hydraulic cylinder feed with hose guide and double drill tube • Gear pump (3) ....................................63 l/min 16.6 US gal/min
support with break-out table and movable lower guide/dust hood • Gear pump (4) ....................................39 l/min 8.9 US gal/min
• Feed rate, max..................................... 0.9 m/s 177 ft/min • Gear pump (5) ....................................37 l/min 9.8 US gal/min
• Feed force, max................................... 40 kN 8 992 lbf • Gear pump (6)......................................37 l/min 9.8 US gal/min
• Tractive pull, max................................ 50 kN 11 240 lbf Return and drainage filters (2 x 3 filters)
• Feed extension..................................... 1 900 mm 6’ 3’’ • Filtration rate.......................................20 µm absolute
• Travel length........................................ 5 400 mm 17’ 7’’
Electrical system
Dust collector
• Voltage................................................. 24 V
DCT 200 for L625 • Batteries............................................... 2 x 12 V, 185 Ah
• Filter area.............................................20 m2 215 sq.ft • Alternator............................................. 28 V, 95 Ah
• Suction capacity at 500 mm wg...........850 l/s 3 002 cfm • Work lights, front................................. 4 x 70 W
• Suction hose diam................................152 mm 6’’ • Work lights, rear.................................. 2 x 70 W
• Cleaning air pressure, max..................8 bar 116 psi • Warning lamp and reverse buzzer
• Cleaning air consumption....................2-4 l/pulse 0,06-0,12 • Work lights, feed………………....2 x 70 W
. ............................................................. cf/pulse
DCT 320F for L630 Volumes
• Filter area.............................................32 m2 344 sq.ft
• Number of filter elements....................32 pcs • Hydraulic oil tank................................ 380 l 100 US gal
• Suction capacity at 500 mm wg...........1270 l/s 2 690 cfm • Hydraulic system, total........................ 470 l 124 US gal
• Suction hose diam................................152 mm 6’’ • Compressor oil..................................... 63 l 12 US gal
• Cleaning air pressure, max..................8 bar 116 psi • Diesel engine oil.................................. 42 l 9.3 US gal
• Cleaning air consumption....................2-4 l/pulse 0,06-0,12 • Diesel engine, cooling water............... 68 l 18 US gal
. ............................................................. cf/pulse • Diesel engine, fuel tank....................... 760 l 201 US gal
• Traction gear........................................ 3 l 0.8 US gal
Safety cabin • Lubrication tank (HECL +ECL) . ....... 20 l 5.3 US gal
• ROPS and FOPS approved with rubber vibration dampers Air conditioner
• 2 x wipers with washer (front and roof windows)
• Clear laminated glass (front and roof windows) • Refrigerant........................................... R134a
• Clear toughened glass (side and rear windows) • Cooling capacity.................................. 5,5 kW
• Fully adjustable operator´s seat • Fan suction capacity............................ 125 l/s 265 cfm
• Cabin light
• Rig inclination indicator
• Rear view mirror
• Fire extinguisher 6 kg (13 lbs) dry chemical ABE class III type
• Outlet socket 24 V
• Combined front mounted platform/tool box
• Electric combined inclination/hole depth instrument
Rotary head
Max torque, drilling Max torque, breaking
Rotary head Connection thread Max rpm Suitable for DTH-hammer
Nm Ibf Nm Ibf
DHR6 H 45 API 2 3/8” REG, box 137 1839 1356 1916 1413 COP 34, COP 44
DHR6 H 56 API 2 3/8” REG, box 107 2353 1735 2452 1809 COP 54, COP 64
HD = Heavy duty
Transport dimensions ROC L625 and L630
Height (H1) 1
3 500 mm 11’ 6’’
Height (H1) 2
3 300 mm 10’ 9’’
Length (L1) 10 700 mm 35’ 1’’ L1
1
Feed tramming support removed
2
With RHS 140 (Permutation)
2500
Side view
330
3030
3550
5450
30º
Coverage areas
2440
30
4230
32º
Toe-hole drilling reach for short feed (option)
95º
9851 2331 01f © Copyright 2008, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional
Printed in Sweden 0904 extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.