Professional Documents
Culture Documents
Selecting The Correct Screw PDF
Selecting The Correct Screw PDF
The charts below helps to select the correct screw type when joining like thicknesses of wood (ie. 3/4” (19mm) to 3/4” (19mm)
Selecting the Correct Screw
Logo on white, gray
or any lighter shade
when printing color
material) in both a frame and right angle application. This chart assumes that you are using the setting of the jig that corresponds to
the material thickness you are drilling, and that you are using the standard drill bit depth collar settings. These are simply standard Logo on Pantone
guidelines for screw penetration. We always recommend that you test your desired joint in scrap material before drilling and 2945 or any darker
shade when printing
assembling the final joint. color
0.421
0.421 (28mm)
Material - Joining 5/8” (16mm) to 5/8” (16mm) Material - Joining 3/4” (19mm) to 3/4” (19mm) Material - Joining 1-1/8” (28mm)
0.421 0.421 to 1-1/8”
0.662
Material0.662
- 0.622
Joining 1-1/4” 0.622
(32mm) to 1-1/4” (32mm)
0.622
0.622 0.78
0.781
Recommended screw length - 1” (25mm) or Recommended screw length - 1-1/4” (32mm) Recommended screw length - 1-1/2” (38mm) Recommended screw length - 2” (51mm) Logo on white
1-1/4” (32mm) or light shade when
printing grayscale
0.421 0.421
0.662 0.622 0.622 0.781 0.781 0.781 0.781
Logo on black or
dark shade when
printing grayscale
Recommended screw length - 1-1/2” (38mm) Recommended screw length - 1-1/2” (38mm) Recommended screw length - 2” (51mm) Recommended screw length - 2-1/2” (63mm)
1” (25mm) Material
7/8” (22mm) Material
0.545