The user can turn on the system to collect the data or turn off when they don’t need Exception: No power supply, Error in system. 2. Check connection of central unit The user can check the connection between they laptop and the central unit connected by RS232 module Exception: No power supply, Fail Connection, Transmission line get problems 3. Check connection of sensor units The user can check the connection between the central unit and the sensor units connected by I2C communication Exception: No power supply, Fail Connection, Problem in Transmission line, Wrong Connection Configuration 4. Check the activity of sensors The user can check the activities of sensor by checking the output of sensors, which are return to the sensor unit and laptop with a result in appropriate range. Exception: No power supply, sensors and microprocessor not working, error in connection between sensor and microprocessor sensor unit. 5. Check the result of the unit sensor at measurement side The user can check the measurement side through a LCD monitor to make sure that unit sensor work stably Exception: No power supply, sensors and microprocessor not working error in connection between sensor and microprocessor sensor unit. 6. Record the data to a statistic file The user can take a record of data in any time period by using a statistic application Exception: Cannot connecting the software to the hardware, System not working, Software error 7. Export graph for storing and further analysis The user can export a graph of data in any time period by using a statistic application Exception: Software error, Cannot connecting the software to the hardware.