You are on page 1of 1

Scope of work for Installation of 25 Mtr. High mast lighting system.

1.0 Shifting of 25 Mtr. high mast lighting pole from TAPS store at location
at which High Mast is to be installed with the help of loading/ unloading
arrangement .
Note: Only the High Mast Pole will be supplied by TAPS.
2.0 Excavation & construction of civil foundation for installation of high mast lighting
as per M/s Bajaj approved drawing for High Mast Installation.

3.0 Excavation of cable trench & laying of cable at the depth of 1 Mtr. with bricks,
sand form main panel control & normalisation to its original position.

4.0 Provision of Cable end termination at main panel & control panel at high mast
Lighting

5.0 Provision of cable marker along with cable route.

6.0 Provision of G.I. pipe earthing as per Drawing IS-3043: 2 Nos.

7.0 Erection of the control panel on suitable foundation including all material
& labour.

8.0 Provision of supporting clamps, pipes, hardware etc. for installation of flood
lights.

9.0 Complete erection assembly, installation of high mast lighting system at


foundation prepared as per Bajaj Approved Drawing.

10.0 Suitable earth terminal shall be provided at convenient location on base


plate.

11.0 Provision of lightning rod 1.2 Mtr. Length, 25 mm diameter with suitable
fixing arrangement .

12.0 Commissioning & testing of high mast lighting system including checkout
of operating system of Lantern Carriage.

13.0 All shfiting ,loading ,erection & commissioning of high mast lighting with help of
crane is in the scope of vendor.
14.0 The total period for supply, installation ,commissioning & testing of 25 Mtr.
high mast lighting is approx. 45 days .

You might also like