Powersupply Issue :

`show clock`
19:57:21.591 UTC Tue May 21 2019

`show inventory` - serial number

NAME: "Chassis", DESCR: "MDS 9250i 40 FC 2 IPS 8 FCoE (2 RU) Chassis "
PID: DS-C9250I-K9 , VID: V02 , SN: JPG193200FN

Show version:
Software
BIOS: version 2.1.17
loader: version N/A
kickstart: version 6.2(23)
system: version 6.2(23)

`show environment`
Power Supply:
Voltage: 12 Volts
-----------------------------------------------------
PS Model Power Power Status
(Watts) (Amp)
-----------------------------------------------------
1 DS-C50I-300AC 300.00 25.00 Ok
2 DS-C50I-300AC 300.00 25.00 Ok (faulty)
3 DS-C50I-300AC 300.00 25.00 Ok

``show logging log`

2018 Jul 17 14:55:53 ITDC-C9250-B102 %SYSLOG-2-SYSTEM_MSG : Syslogs wont be logged
into logflash until logflash is online
2018 Jul 17 14:55:57 ITDC-C9250-B102 Jul 17 14:55:57 %KERN-0-SYSTEM_MSG:
[ 1.996453] Enabling all PCI devices - kernel
2018 Jul 17 14:55:57 ITDC-C9250-B102 Jul 17 14:55:57 %KERN-3-SYSTEM_MSG:
[ 11.820935] alishan_ide: base phys:0xfff608000 vir:0xf1022000, ctrl
phys:0xfff610000 vir:0xf1030000 - kernel
2018 Jul 17 14:55:57 ITDC-C9250-B102 Jul 17 14:55:57 %KERN-3-SYSTEM_MSG:
[ 22.086798] CMOS: Module initialized - kernel
2018 Jul 17 14:55:53 ITDC-C9250-B102 %SYSLOG-2-SYSTEM_MSG : Syslogs wont be logged
into logflash until logflash is online
2018 Jul 17 14:55:57 ITDC-C9250-B102 Jul 17 14:55:57 %KERN-0-SYSTEM_MSG:
[ 1.996453] Enabling all PCI devices - kernel
2018 Jul 17 14:55:57 ITDC-C9250-B102 Jul 17 14:55:57 %KERN-3-SYSTEM_MSG:
[ 11.820935] alishan_ide: base phys:0xfff608000 vir:0xf1022000, ctrl
phys:0xfff610000 vir:0xf1030000 - kernel
2018 Jul 17 14:55:57 ITDC-C9250-B102 Jul 17 14:55:57 %KERN-3-SYSTEM_MSG:
[ 22.086798] CMOS: Module initialized � kernel

Power supply failed (cisco)

Error Code : 'PowerSupply-2' in Slot 1 on switch 'ITDC-C9250-B102' status changed

to offEnvPower, adminStatus on

Commands:
"show clock

show inventory
show version
show environment- powersupply

show logging log - date - time