Professional Documents
Culture Documents
G Title PDF
G Title PDF
ENGINE
4G1 SERIES (E - W)
WORKSHOP MANUAL
FOREWORD
FILING INSTRUCTION
Please keep these manual pages in the binder
No. BN940001.
File these pages according to the signs
“Added”, “Revised” and “Deleted” on the “List
of effective pages” which are interpreted
below.
Added:
File the pages with this sign additionally in
your manual.
Revised, Deleted:
Replace the existing pages with the
corresponding pages with this sign.
Indicates the Indicates the Indicates the Indicates the Indicates the
group title. section title. group number. section num- page number.
ber.
27 Nm
4 11 Nm
12
3 5
11 6 8 7
9
23 Nm
14
Removal steps
1. Water hose "CA 8. Thermostat
2. Water hose 9. Thermostat case
3. Water hose 10.Gasket
"FA 4. Thermo valve (engines with EGR) "BA 11.Water inlet pipe
"FA 5. (20) 5. valve
Thermo "BA 12.O-ring
Thermo valve
"DA 6. Water temperature gauge unit "BA 13.O-ring
7. Water inlet timing "AA 14.Water pump Operating procedures, cau-
tions, etc. on removal, installa-
INSTALLATION SERVICE POINTS tion, disassembly and reas-
"AA WATER PUMP INSTALLATION sembly are described.
(1)Apply a 3 mm bead of form-in-place gasket (FIPG) to the
mounting surface.
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or equivalent.