Professional Documents
Culture Documents
Features
Wide 8V to 36V Input Voltage Range General Description
Output Adjustable from 1.25V to 32V The XL4015 is a 180 KHz fixed frequency
Maximum Duty Cycle 100% PWM buck (step-down) DC/DC converter,
Minimum Drop Out 0.3V capable of driving a 5A load with high
Fixed 180KHz Switching Frequency efficiency, low ripple and excellent line and
5A Constant Output Current Capability load regulation. Requiring a minimum
Internal Optimize Power MOSFET number of external components, the regulator
High efficiency up to 96% is simple to use and include internal
Excellent line and load regulation frequency compensation and a
Built in thermal shutdown function fixed-frequency oscillator.
Built in current limit function
Built in output short protection function The PWM control circuit is able to adjust the
Available in TO263-5L package duty ratio linearly from 0 to 100%. An over
current protection function is built inside.
When short protection function happens, the
operation frequency will be reduced from
Applications 180KHz to 48KHz. An internal compensation
LCD Monitor and LCD TV block is built in to minimize external
Portable instrument power supply component count.
Telecom / Networking Equipment
Pin Configurations
Function Block
Ordering Information
Order Information Marking ID Package Type Packing Type Supplied As
XL4015E1 XL4015E1 TO263-5L 800 Units on Tape & Reel
XLSEMI Pb-free products, as designated with “E1” suffix in the par number, are RoHS compliant.
Note1: Stresses greater than those listed under Maximum Ratings may cause permanent damage
to the device. This is a stress rating only and functional operation of the device at these or any
other conditions above those indicated in the operation is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
95
90
85
80
Efficiency(%)
75
VIN=8V,VOUT=5V,IOUT=0.1A~5A
70
VIN=12V,VOUT=5V,IOUT=0.1A~5A
65 VIN=24V,VOUT=5V,IOUT=0.1A~5A
VIN=36V,VOUT=5V,IOUT=0.1A~5A
60
55
50
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Load current(A)
95
90
85
80
Efficiency(%)
75 VIN=15V,VOUT=12V,IOUT=0.1A~4A
VIN=24V,VOUT=12V,IOUT=0.1A~4A
70
VIN=36V,VOUT=12V,IOUT=0.1A~4A
65
60
55
50
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Output current(A)
Package Information
TO263-5L
Important Notice
XLSEMI reserve the right to make modifications, enhancements, improvements, corrections or
other changes without notice at any time. XLSEMI does not assume any liability arising out of
the application or use of any product described herein; neither does it convey any license under
its patent rights, nor the rights of others. XLSEMI assumes no liability for applications assistance
or the design of Buyers’ products. Buyers are responsible for their products and applications
using XLSEMI components. To minimize the risks associated with Buyers’ products and
applications, Buyers should provide adequate design and operating safeguards. XLSEMI
warrants performance of its products to the specifications applicable at the time of sale, in
accordance with the warranty in XLSEMI’s terms and conditions of sale of semiconductor
products. Testing and other quality control techniques are used to the extent XLSEMI deems
necessary to support this warranty. Except where mandated by applicable law, testing of all
parameters of each component is not necessarily performed.
For the latest product information, go to www.xlsemi.com.