1. There must be at least two (2) people in the laboratory
while working on live circuit 2. Remove all loose conductive jewelry and trinkets, including rings, which may come in contact with exposed circuits. 3. Consider all circuits to be "hot" unless proven otherwise. 4. Be as neat a possible. Keep the work area and workbench clear of items not used in the experiment. 5. Always check to see that the power switch is OFF before plugging into the outlet. Also, turn instrument or equipment OFF before unplugging from the outlet. 6. Pull electrical cords from the socket by holding the plug, not the wire. 7. When using machine tools and measuring devices, use the predetermined tool. 8. Wear protective goggles and protective equipment in the necessary locations. 9. Calibration of gas detectors must be done in gas chamber. 10. Use proper fittings for pressure related jobs.