Professional Documents
Culture Documents
Wi Connect PLC
Wi Connect PLC
Subject / Title :
Connect to PLC
Area Maintenance
Curing
Supervisor Maintenance
Approved By :
Reference Prepared by :
Maintenance Production HSE IE Manager
Membuat
Driver PLC
According to safety
instruction: Gloves
Safety boots
(mod. S1)
Coveralls
Symbol Standards
Contact phones
Warnings
- Hati-hati tangan
- Waspada potensi Bahaya terjepit
benda bergerak.
No Operation Procedure
1.3 - Hubungkan kabel RJ45 dari laptop (port terdapat dibagian belakang lapto
2. SETTING IP
2.1 - Klik icon Wifi pada Taskbar --> Klik Open Network and Sharing Center
2.6 -Ubah IP Adress sesuai dengan alamat IP mesin (192.168.1.1), untuk mem
dengan 192.168.1.235 untuk bagian auto painting --> lalu Klik OK
3. CONNECT PLC
3.1 - Buka aplikasi RS Logic 5000 --> Klik File --> Klik Open
3.3 Setelah file dibuka akan muncul tampilan seperti pada gambar --> Klik tom
dibagian toolbar
3.6 - Jika berhasil online maka indikator Run Mode akan berwarna hijau
Doc. Number :
Effective date :
Connect to PLC
Total time
35 menit
Safety standards
Safety Helmet
Ear plug
Symbol Standards
PRODUCTIVITY ENVIRONMENT
Contact phones
0823-1868-7143
Prohibited
Hazard category
Designation
0) green: zero
Production Fires/
1) yellow: low Explosio
n
2) orange: middle 1 0
3) red: high
0 0
Noise Chemical
substances
Operation Procedure
N EQUIPMENT (PERALATAN)
Doc. Number :
Effective date :
Connect to PLC
Total time
35 menit
2. SETTING IP
Effective date :
Connect to PLC
Total time
35 menit
word.
word dapat dilihat pada note yang sudah disediakan
Pass: Pirelli01)
ol Version 4(TCP/IPv4)
3. CONNECT PLC
C terbaru
Doc. Number :
Effective date :
Connect to PLC
Total time
35 menit
C terbaru
kan