Professional Documents
Culture Documents
An Area Was Chosen For The Realization of A Route in Order To Apply What Was Seen in The Semester
An Area Was Chosen For The Realization of A Route in Order To Apply What Was Seen in The Semester
the semester. with the chosen area a first study of this is to take with the global
mapping tool, these studies are conducted in digital format as are micro basis and
contours. the contour lines were worked in civil AutoCAD since this program was
used for the entire realization of the road. Preliminary routes are carried out, zero
ground identification line. With this the slopes, tangent speed, curve speed, radius
of the curves, can’t and diagram are calculated in order to perform the geometric
design horizontal of the road. All hydraulics procedures were performed, the flow
rate affecting each section was determined. with the study of SPT parameters and
factors were determined for obtaining the load capacity