Professional Documents
Culture Documents
LRCR3283 - N Control Remoto PDF
LRCR3283 - N Control Remoto PDF
Press and hold the device key you want to program (the
Step 2: Program your remote YES: Go to step 5. The Brand Code Search goes through only the codes for one of indicator light comes on).
the select brands listed in the accompanying code list. If your Throughout the programming of each key, be sure to keep
NO: Press PLAY again. The remote tests the next batch of the remote pointed at the IR sensor of the device you are While you’re holding down the device key, use your other
To use this universal remote with your home entertainment brand of device is listed, this search can be very quick and easy.
10 codes. currently programming the remote to control. hand enter the first five-digit code for your brand in the
system, first you need to program it to control your devices.
code list (the indicator light goes off after the first digit).
There are four ways you can program the universal remote to Keep pressing PLAY every 5 seconds until your device turns TIPS: Each device key is associated with a type of device— Test the remote with the device to make sure the device
operate your devices: off. the TV is preset to search for TVs, SAT•CBL•DTC for satellite key is programmed with the correct code for maximum
RCR3283N / • The Auto Code Search goes automatically through all the
codes for the device you’re trying to control. It’s the easiest
5. When your device turns off, press
the REVERSE key on the remote
receivers, cable boxes or digital TV converters (DTC), and
DVD•VCR for DVD players. To program a device key for
a different type of device (for example, to program the
functionality. If some features don’t work, try a different
code. See the “Testing the Code for Maximum Functionality”
section below for more information.
RCR3383N
method, but it can sometimes take longer than some of the and wait at least 2 seconds. DVD•VCR key to control a PVR or VCR), see the Reassigning
other programming methods. During the Brand Code Search, the remote ignores
The remote tries the last of the the DVD•VCR Key to Control a VCR section. keypresses that aren’t part of the search.
• The Brand Code Search searches through the codes for previous ten codes.
To exit without saving a new code at any point in the Brand The search times out after two minutes (the indicator blinks
Universal Remote Control select brands of devices. It’s not as easy as the auto code
search, but it can be faster.
Did your device turn on? Code Search, press the CLEAR key. four times and turns off, and the last programmed code
YES: Press the STOP key. You’re under that device key is retained).
Owner’s Manual • The Direct Code Entry lets you enter a code from the done! You’ve programmed this 1. Manually turn on the device you The indicator blinks four times and turns off when the
Manual del Propietario (parte posterior) accompanying code list for your brand of device. It’s not as device key. want to control. remote has gone through all the codes. The remote exits the
easy as the other methods, but it’s potentially the fastest NO: Press REVERSE again. The remote tests the next Brand Code Search. If your device hasn’t turned off yet, try a
method.
code in the batch. different search method.
• The Manual Code Search lets you manually go through Keep pressing REVERSE every 2 seconds until your device
all the codes for the device you’re trying to control. turns back on. When it does, press STOP. 4. When you’ve finished entering Indicator light
SAVE THIS MANUAL AND THE CODE LISTS! 2. Find your device’s brand in the ts
the five-digit code, keep holding
Note: If you accidentally press the REVERSE key after your
Li
Code gos
Remote controls can sometimes lose their programming Brand Code list section of the a de
Códi
Testing the Code for Maximum Functionality down the device key and look at
List
device turns on, press the FORWARD key. Then, wait two
when you change the batteries. Make sure you keep the Auto Code Search accompanying code list. Circle
V
1. Try a variety of the device’s functions with the remote. If the indicator light.
9
8
7
manual and code lists in a safe place so that you can the number for your brand and
3
2
1 VCR
The Auto Code Search goes automatically through all the some device features don’t work, go to the next step to try
0 9
8
7
6
5
D
1 DV
9
codes for the device you’re trying to control. When you find
0
a different code.
8
7
NOTES
6
5
4
3
2 BLE
1 /CA
0 9
the one that operates your device, you can stop the search and
SA
8
7
most RCA-branded TVs, VCRs, DVD players and satellite store that code. Throughout the programming of each key, be sure to keep
the device turns off for the first time, don’t press the STOP NO, it blinked four times and turned off: You have
receivers. Just press the corresponding key—DVD•VCR the remote pointed at the IR sensor of the device you are
key, which would store the same code. Instead, with the either entered a code number that is not in the code lists or
for a DVD player, TV for a television, SAT•CBL•DTC for a TIPS: Each device key is associated with a type of currently programming the remote to control. 3. Press and hold the device key you want to program. While unit now off, continue to press the POWER key repeatedly missed a step in the code entry procedure. Try step 3 again.
satellite receiver. device—the TV is preset to search for TVs, SAT•CBL•DTC Test the remote with the device to make sure the you’re holding down the device key, use your other hand until the unit turns back on.
for satellite receivers, cable boxes or digital TV converters device key is programmed with the correct code for to press and hold the remote’s POWER key at the same
3. Once the unit turns back on, you have found another code NOTES
(DTC), and DVD•VCR for DVD players. To program a device maximum functionality. If some features don’t work, try time.
key for a different type of device (for example, to program that operates the device. Press the STOP key. Remember to enter the code for future reference in the box
a different code. See the “Testing the Code for Maximum
provided in the Code Retrieval section of this manual.
Step 1: Install your batteries the DVD•VCR key to control a PVR or VCR), see the
Reassigning the DVD•VCR Key to Control a VCR section.
Functionality” section below for more information. 4. Test the key’s functionality again by attempting to control
a variety of the device’s functions. If the code that has If your brand isn’t listed in the code list, use one of the Code
During the Auto Code Search, the remote ignores been stored controls the majority of the device’s functions, Search methods to program the remote control. (Refer to the
Your universal remote requires two AAA alkaline batteries (not To exit without saving a new code at any point in the Auto
keypresses that aren’t part of the search. programming is complete. If the code stored does not give Auto and Manual Code Search methods.)
included). Code Search, press the CLEAR key.
maximum functionality, try another code.
The search times out after two minutes (the indicator blinks If you release the device key any time during the Direct
To install the batteries: four times and turns off, and the last programmed code Code Entry procedure, the indicator blinks four times, and
1. Press and push the battery 1. Manually turn on the device you under that device key is retained). 4. Wait until the remote’s indicator the process is exited. The last programmed code under the
compartment cover to remove it. want to control. comes on and stays on. Then release device key is retained.
The indicator blinks four times and turns off when the both keys.
remote has gone through all the codes. The remote exits Test the remote with the device to make sure the device
2. Insert the batteries, matching the Auto Code Search. If your device hasn’t turned off yet, Direct Code Entry key is programmed with the correct code for maximum
the batteries to the (+) and try a different search method. Direct Code Entry lets you enter a code from the accompanying functionality. If some features don’t work, try a different code
(–) marks inside the battery
compartment. 2. Press and hold the device key you want to program. While 5. Look at the number you circled for code list for your brand of device. It’s not as easy as the other in the list.
you’re holding down the device key, use your other hand your device’s brand code number. methods, but it’s potentially the fastest method.
to press and hold the remote’s POWER key at the same
3. Push the battery cover back into time.
Press that number on the remote
TIP: Each device key is associated with a type of device—
place. Testing the Code for Maximum Functionality keypad.
the TV is preset to search for TVs, SAT•CBL•DTC for satellite
1. Try a variety of the device’s functions with the remote. If receivers, cable boxes or digital TV converters (DTC), and
some device features don’t work, go to the next step to try
DVD•VCR for DVD players. To program a device key for
Battery Precautions: a different code. a different type of device (for example, to program the
• Do not mix old and new batteries.
2. Repeat the Auto Code Search Method from the beginning. 6. Point the remote directly at the DVD•VCR key to control a PVR or VCR), see the Reassigning Manual Code Search
When your device turns off, do not stop searching. front panel of the device you want the DVD•VCR Key to Control a VCR section. The Manual Code Search lets you go one-by-one through all the
• Do not mix alkaline, standard (carbon-zinc) or
Instead, with the unit now off, continue to press the PLAY to control. Press POWER on the codes for the device you’re trying to control. When you find the
rechargeable (nickel-cadmium) batteries. key every 5 seconds until the unit turns back on.
remote and wait 2 seconds. The
• Always remove old, weak or worn-out batteries promptly
remote is testing a single code for 1. Manually turn on the device you one that operates your device, you can stop the search and store
and recycle or dispose of them in accordance with Local 3. Wait until the remote’s indicator 3. Once the unit turns back on, press the REVERSE key on the want to control. that code.
remote every 2 seconds until your device turns off again. your device’s brand.
and National Regulations. comes on and stays on. Then TIPS: The Manual Code Search method may take a long time
When your device turns off again, press the STOP key.
release both keys. Did your device turn off? because the remote searches through all of the codes in
4. Test the key’s functionality again by attempting to control its memory one-by-one. If your brand is listed in the Brand
Battery Saver a variety of the device’s functions. If the code that has YES: Press the STOP key to store the code. You’re done!
Codes or the Code Lists, first try the Brand Code Search or
Your universal remote control saves battery power by You’ve programmed this device key.
automatically turning off if any key is pressed for more than
been stored controls the majority of the device’s functions, 2. Find the Code List that came with the Direct Code Entry method.
4. Point the remote directly at the programming is complete. If the code stored does not give
s
List
NO: Press POWER again. The remote tests the next code the remote. Locate the section for Code
Códi
gos
for your brand. the type of device you’re trying to preset to search for TVs, SAT•CBL•DTC for satellite receivers,
get stuck in a place where the keys remain depressed, such as
TV
9
8
7
between sofa cushions. Keep pressing POWER every 2 seconds until your device
1
0 9
8
7
D
1 DV
The remote is testing a batch of your brand and keep them handy.
5
10 codes on your device. a PVR or VCR), see the Reassigning the DVD•VCR Key to
5
4
3
2
1
0
RCR3283N /
la tecla de dispositivo esté programada con el código correcto
métodos a continuación. tipo de dispositivo—TV está configurada para buscar TV,
y garantizar así su máxima funcionalidad. Si no puede utilizar
• La Búsqueda Automática de Códigos recorre 5. Cuando el dispositivo se apague, SAT•CBL•DTC para receptores de satélite, aparatos de cable
alguna de las funciones, intente con otro código. Para obtener
automáticamente todos los códigos del dispositivo que desea oprima la tecla REVERSE del control o convertidores de TV digital, y DVD•VCR para lectores de
mayor información, consulte la sección “Cómo Probar el Código
remoto y espere por lo menos 2 DVD. Para programar una tecla de dispositivo para un tipo de
RCR3383N
manejar. Éste es el método más fácil, pero a veces toma más para Obtener Máxima Funcionalidad” a continuación.
tiempo que algunos de los demás métodos de programación. segundos. El control remoto prueba el dispositivo diferente (por ejemplo, para programar una tecla
último código del grupo anterior de 10 DVD•VCR para manejar un PVR o VCR), consulte la sección Durante la Búsqueda de Códigos por Marca, el control remoto
• La Búsqueda de Códigos por Marca busca a través de los ignora la opresión de teclas que no son parte de la búsqueda.
códigos. Cómo Reasignar la Tecla DVD•VCR para Manejar una VCR.
códigos según la marca de dispositivos seleccionada. No es tan
La búsqueda se detendrá luego de dos minutos (el indicador
Manual del Propietario del fácil como la búsqueda de códigos automática, pero muchas
veces puede ser más rápida.
¿Se encendió el dispositivo? Para salir en cualquier momento de la Búsqueda de Códigos
por Marca sin guardar un código nuevo, oprima la tecla CLEAR. parpadea cuatro veces y se apaga, y se retiene el último código
SÍ: Oprima la tecla STOP. ¡Listo! La
Control Remoto Universal • La Entrada Directa de Códigos le permite ingresar un tecla de dispositivo está programada.
programado bajo la tecla de dispositivo).
El indicador parpadea cuatro veces y se apaga cuando el control
código de la lista de códigos suministrada para la marca de su 1. Encienda manualmente el
Owner’s Manual (English on back) dispositivo. No es tan fácil como los otros métodos, pero es
NO: Oprima REVERSE nuevamente. El control remoto prueba el remoto ha recorrido todos los códigos. El control remoto sale del
próximo código en el grupo de códigos. dispositivo que desea manejar. método de Búsqueda de Códigos por Marca. Si su dispositivo
posiblemente el más rápido.
Continúe oprimiendo REVERSE cada 2 segundos hasta que el aún no se ha apagado, intente un método de búsqueda diferente.
• La Búsqueda Manual de Códigos le permite recorrer
dispositivo se encienda. Cuando se encienda, oprima STOP.
¡GUARDE ESTE MANUAL Y LAS LISTAS DE CÓDIGOS!
manualmente todos los códigos del dispositivo que desea 4. Cuando haya ingresado el Luz indicadora
manejar. Aviso: Si oprime accidentalmente la tecla REVERSE luego de Cómo Probar el Código para Obtener Máxima Funcionalidad código de cinco dígitos, continúe
En ocasiones los controles remotos pierden su programación que el dispositivo se encienda, oprima la tecla FORWARD. Luego, 2. Encuentre la marca del dispositivo en 1. Pruebe una variedad de funciones del dispositivo con el control
s
oprimiendo la tecla de dispositivo y
cuando se cambian las baterías. Asegúrese de mantener el
List
Code
espere dos segundos para ver si su dispositivo se vuelve a apagar. la sección de Códigos por Marca de la a de
Códi
gos
remoto. Si no puede utilizar alguna de las funciones de sus observe la luz indicadora.
manual y las listas de códigos en un lugar seguro de manera
List
lista de códigos suministrada. Marque dispositivos, vaya al próximo paso e intente un código diferente.
V
necesario.
8
2 D
1 DV
0 9
está programada.
7
1 CA
0 9
mayoría de televisores, VCR, lectores de DVD y receptores de No, parpadeó cuatro veces y se apagó: Ha ingresado un
5
satélite RCA. Sencillamente oprima la tecla correspondiente— y guardar el código. repetidamente hasta que la unidad se vuelva a encender. número de código que no se encuentra en las listas de códigos
con el control remoto. vez que sostiene la tecla de dispositivo,
DVD•VCR para un Lector de DVD, TV para un televisor, u omitió un paso en el procedimiento de entrada de códigos.
utilice la otra mano para oprimir y sostener simultáneamente la 3. Si se vuelve a encender la unidad, habrá encontrado otro código
SAT•CBL•DTC para un receptor de satélite. Pruebe el control remoto con el dispositivo para asegurarse que Intente el paso 3 nuevamente.
CONSEJOS: Cada tecla de dispositivo está asociada a un tecla POWER del control remoto. que puede manejar ese dispositivo. Oprima STOP.
la tecla de dispositivo esté programada con el código correcto
tipo de dispositivo—TV está configurada para buscar TV,
y garantizar así su máxima funcionalidad. Si no puede utilizar 4. Pruebe la funcionalidad de la tecla nuevamente intentando NOTAS
SAT•CBL•DTC para receptores de satélite, aparatos de cable
alguna de las funciones, intente con otro código. Para obtener una variedad de funciones. Si el código controla la mayoría
o convertidores de TV digital, y DVD•VCR para lectores de Recuerde ingresar el código para referencia futura en el
mayor información, consulte la sección “Cómo Probar el Código de las funciones del dispositivo, entonces habrá concluido la
DVD. Para programar una tecla de dispositivo para un tipo de recuadro provisto en la sección Recuperación de Códigos de
Paso 1: Instale las baterías dispositivo diferente (por ejemplo, para programar una tecla
para Obtener Máxima Funcionalidad” a continuación. programación. Si el código guardado no brinda una máxima
este manual.
funcionalidad, intente otro código.
DVD•VCR para manejar un PVR o VCR), consulte la sección Durante la Búsqueda Automática de Códigos, el control remoto Si la marca de su dispositivo no aparece en la lista de códigos,
El control remoto necesita dos baterías alcalinas AAA (no Cómo Reasignar la Tecla DVD•VCR para Manejar una VCR. ignora la opresión de teclas que no son parte de la búsqueda.
utilice uno de los métodos de Búsqueda de Códigos para
suministradas). Para salir en cualquier momento de la Búsqueda Automática de La búsqueda se detendrá luego de dos minutos (el indicador programar el control remoto. (Consulte los métodos de
Para instalar las baterías: Códigos sin guardar un código nuevo, oprima la tecla CLEAR. parpadea cuatro veces y se apaga, y se retiene el último código Búsqueda Automática y Manual de Códigos)
programado bajo la tecla de dispositivo). 4. Espere hasta que el indicador del Si suelta la tecla de dispositivo en cualquier momento durante
control remoto se ilumine y permanezca
1. Oprima y empuje la tapa del El indicador parpadea cuatro veces y se apaga cuando el el proceso de Entrada Directa de Códigos, el indicador parpadea
compartimiento de las baterías para 1. Encienda manualmente el iluminado. Luego, suelte ambas teclas. cuatro veces, y se sale del proceso. Se retendrá el último código
control remoto ha recorrido todos los códigos. El control
removerla. dispositivo que desea manejar. remoto sale del método de Búsqueda Automática de Códigos. Entrada Directa de Códigos programado bajo la tecla de dispositivo.
Si su dispositivo aún no se ha apagado, intente un método de La Entrada Directa de Códigos le permite ingresar un código de la
Pruebe el control remoto con el dispositivo para asegurarse que
2. Inserte las baterías, cerciorándose búsqueda diferente. lista de códigos suministrada para la marca de su dispositivo. No la tecla de dispositivo esté programada con el código correcto
de que las polaridades (+) y (–) es tan fácil como los otros métodos, pero es posiblemente el más
correspondan con el diagrama que
5. Fíjese en el número que marcó para y garantizar así su máxima funcionalidad. Si no puede utilizar
el número de código de la marca del rápido. alguna de las funciones, intente con otro código de la lista.
aparece en el compartimiento de las 2. Oprima y sostenga la tecla de dispositivo que desea programar. Cómo Probar el Código para Obtener Máxima Funcionalidad
dispositivo. Oprima dicho número en el
baterías. A la vez que sostiene la tecla de dispositivo, utilice la otra mano 1. Pruebe una variedad de funciones del dispositivo con el teclado del control remoto. CONSEJO: Cada tecla de dispositivo está asociada a un tipo de
3. Vuelva a colocar la tapa del para oprimir y sostener simultáneamente la tecla POWER del control remoto. Si no puede utilizar alguna de las funciones del dispositivo—TV está configurada para buscar TV, SAT•CBL•DTC
compartimiento de las baterías en su control remoto. dispositivo, vaya al próximo paso e intente un código diferente. para receptores de satélite, aparatos de cable, o convertidores
posición. 2. Repita la Búsqueda Automática de Códigos desde el comienzo. de TV digital, y DVD•VCR para lectores de DVD. Para programar
una tecla de dispositivo para un tipo de dispositivo diferente
Búsqueda Manual de Códigos
Cuando su dispositivo se apague, no detenga la búsqueda. En
(por ejemplo, para programar una tecla DVD•VCR para manejar La Búsqueda Manual de Códigos le permite recorrer uno por uno
vez, con la unidad apagada, continúe oprimiendo la tecla PLAY 6. Mantenga el control remoto apuntado
un PVR o VCR), consulte la sección Cómo Reasignar la Tecla todos los códigos del dispositivo que desea manejar. Cuando
Precauciones sobre las Baterías: cada 5 segundos hasta que la unidad se vuelva a encender. directamente al panel frontal del
DVD•VCR para Manejar una VCR. encuentre el que maneja su dispositivo, puede detener la búsqueda y
• No combine baterías nuevas y viejas. 3. Cuando se vuelva a encender la unidad, oprima la tecla dispositivo que desea manejar. Oprima guardar el código.
• No combine diferentes tipos de baterías: alcalinas, estándar REVERSE en el control remoto cada 2 segundos hasta que el la tecla POWER del control remoto y
dispositivo se vuelva a apagar. Cuando el dispositivo se vuelva espere 2 segundos. El control remoto 1. Encienda manualmente el dispositivo CONSEJOS: El método de Búsqueda Manual de Códigos podría
(carbón-zinc) o recargables (níquel-cadmio).
a apagar, oprima la tecla STOP. está probando un código para la marca que desea manejar. tomar más tiempo porque el control remoto busca a través de
• Siempre remueva de inmediato baterías viejas, débiles o
3. Espere hasta que el indicador del dispositivo. todos los códigos en su memoria uno por uno. Si su marca
desgastadas, y recíclelas o deséchelas según lo disponen las 4. Nuevamente, pruebe la funcionalidad de la tecla intentando aparece en las Listas de Códigos por Marca o Listas de Códigos,
del control remoto se ilumine y
normas locales y nacionales. controlar una variedad de funciones del dispositivo. Si el código intente primero la Búsqueda de Códigos por Marca o el método
permanezca iluminado. Luego,
suelte ambas teclas. que se ha almacenado controla la mayoría de las funciones del ¿Se apagó el dispositivo? de Entrada Directa de Códigos.
dispositivo, entonces habrá concluido la programación. Si el
Ahorro de Batería SÍ: Oprima la tecla STOP para guardar el código. ¡Listo! La tecla 2. Encuentre la Lista de Códigos s Cada tecla de dispositivo está asociada a un tipo de dispositivo—
código guardado no brinda una máxima funcionalidad, intente
List
Code gos
de dispositivo está programada. suministrada con el control remoto. a de
Códi
TV está configurada para buscar TV, SAT•CBL•DTC para
Su control remoto universal ahorra la potencia de las baterías al otro código.
List
6
7
8
9
sofá.
1
0