11.18 VibratingCantileverBeam.lim!
Analysis type: Modal Vibration 3D Shell and Beam
Elements: Beam (line2)
Loads and constraints: Fixed support _ a
Beam elements are used to model a vibrating cantilever fixed at one end and free at the other. Four
‘elements are needed to capture the higher bending modes. The beam's properties are:
Length, L= 2.4m
Width, b = 0.1m
Height, h = 0.05m
Young's modulus, E = 200 GPa
Density, p = 7860 kg/m’
The frequencies of the first 3 modes for bending in the XY plane are verified by the formula
875
a: = 4.694 ew
= 7886 Wie
bh a ’
i Zossax ig m= LOFTS 10 19.05 7
which gives these frequencies compared to LISA @
@®\Mode | Frequency from formula | Frequency from LISA ExeveLo 110
7.073 Ha 7.074 Hz
E 5 QOTE->
n=2 44.33 Hz 44.38 Hz. oe as) aes)
n=3 125.1 He 125.1 Hz Se 9-995)
S) (0'= 0.025% 08
ee eee (0}- 0.028 50,05)
ogs.: i = A Ge Qpo;-0.0255-005)
ZY
®@ Vets FE VaR eS EC ARCRVEVC VO
PLAVO X¥.
105
088. Vewrcunt aevTave0
Rwvratsses, Voom WoSra7vlov 222en7,