You are on page 1of 10

Below is a picture of my ADP25H.

You can see that I have removed the back, and used a longer
ribbon connector to place the CF card holder at the back of the tray. This means I can remove and
replace the CF cards without having to unplug the tray from the AW4416. The ribbon cable is 1mm
Pitch 50 Pin Wire Flat IDC Ribbon, and can be bought from here:

https://www.aliexpress.com/item/1-m-1-0-mm-Pitch-10-Pin-12-14-16-20-26-30-34-
40/32818900638.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_1034
4_10068_10130_10345_10324_10342_10547_10325_10343_10340_10341_10548_10192_10541_1
0190_10084_10083_10307_10301_10303_10539_10312_10059_10313_10314_10184_10534_1000
31_10604_10603_10103_10605_10594_10596_10142_10107,searchweb201603_31,ppcSwitch_5&
algo_expid=0fb9c05e-45f1-4026-81c8-8fc77ff2dd37-0&algo_pvid=0fb9c05e-45f1-4026-81c8-
8fc77ff2dd37&rmStoreLevelAB=4

You might also like