Professional Documents
Culture Documents
2SC5027
High-Voltage Switching and Amplifier Applications
Unit: mm
Color TV Horizontal Driver Applications
Color TV Chroma Output Applications
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to
decrease in the reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2006-11-10
2SC5027
Electrical Characteristics (Ta = 25°C)
Marking
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2 2006-11-10
2SC5027
IC – VCE hFE – IC
120 500
Common emitter Common emitter
300
Ta = 25°C VCE = 10 V
100 6
hFE
4
3
(mA)
2
Ta = 100°C
DC current gain
100
80
Collector current IC
1
50 −25
25
60
0.6 30
40 0.4
10
0.3 1 3 10 30 100
20 IB = 0.2 mA
Collector current IC (mA)
0
0
0 4 8 12 16 20 24
300 3
Ta = 25°C IC/IB = 5
hFE
VCE = 20 V
DC current gain
100
VCE (sat) (V)
10
50 0.5
30 5 0.3
Ta = 100°C
10 0.1
0.3 1 3 10 30 100
−25 25
Collector current IC (mA) 0.05
0.3 1 3 10 30 100
VCE (sat) – IC
5
Common emitter VBE (sat) – IC
Collector-emitter saturation voltage
3
Ta = 25°C 5
Base-emitter saturation voltage
3 Common emitter
IC/IB = 5
VCE (sat) (V)
1
Ta = 25°C
VBE (sat) (V)
0.5 1
0.3
0.5
IC/IB = 10
5 0.3
0.1 2
0.05 0.1
0.3 1 3 10 30 100 0.3 1 3 10 30 100
3 2006-11-10
2SC5027
IC – VBE fT – IC
100 500
(MHz)
Common emitter Common emitter
300
VCE = 10 V Ta = 25°C
80
fT
100 VCE = 20 V
Transition frequency
60
50
Ta = 100°C 25 −25 5 10
30
40
10
20 0.3 1 3 10 30 100
0
0.2 0.4 0.6 0.8 1.0 1.2
300
f = 1 MHz IC max (pulsed)*
Ta = 25°C 10 ms*
Cob (pF)
5
IC (A)
50
3 100 ms*
30 DC operation
Ta = 25°C
Collector current
1
1 3 10 30 100 300
10
Collector-base voltage VCB (V)
5
3
*: Single nonrepetitive pulse
Ta = 25°C
4 2006-11-10
2SC5027
rth – tw
1000
500 Curves should be applied in thermal limited area. (single nonrepetitive pulse) Ta = 25°C
300
(°C /W)
100
50
rth
30
Transient thermal resistance
10
5
3
0.5
0.3
0.1
0.001 0.01 0.1 1 10 100 1000
PC – Ta
1.6
PC (W)
1.4
1.2
Collector power dissipation
1.0
0.8
0.6
0.4
0.2
0
0 25 50 75 100 125 150 175
5 2006-11-10
2SC5027
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
6 2006-11-10