• Star Screwdriver • Flat Screwdriver • Thermal Paste (optional) • Antistatic wrist strap (optional) PC Disassembly • Make sure that the PC is switched off • Unplug the computer from the power source • Disconnect all the externally connected peripherals • Ground yourself to discharge static electricity • Open the case • Unplug all the internal connections to the motherboard PC Disassembly (cont.) • Unscrew all the drives (HDD, CD-ROM and Floppy Drives) • Remove the memory cards • Remove the Network Interface Card (NIC) • Remove the Video Card • Remove the CMOS battery PC Assembly • Ground yourself to discharge static electricity • Segregate and arrange the computer peripherals • Install the CMOS battery • Install the Video Card • Install the Network Interface Card (NIC) • Install the memory cards PC Assembly (cont.) • Install all the drives (HDD, CD-ROM and Floppy Drives) • Connect all the cables (IDE and SATA) to the motherboard • Close the case Now, It’s Your Turn • A group can have a maximum of 3 members • Each member has a particular task • You will only come during your schedule