Annular BOP Packing unit
Main technical parameters: Bore: 11°(350mm) Working pressure: 50Q0psi(35Mpa)
Characters:
In the structure its divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core,
and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to wide range, capable to seal pipe string with
‘nominal paths fom 0-DN in ans shapes, better performance by combining with ran blowout preventer inthe use.
Working Principle
‘When wells must be sealed in cate of kicks high pressure (10.5Mpa) oil fom control systems enters into clase-cavity under piston from housing
oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer toeach other to moce the rubber
between them te the center of wellhead so as to seal drilling tols or fully seal wellhead. In opening , hydraulic pressure oul enters into open-
cavity above piston ffom housing oul inlet, to push piston moring downwards ,s0 that plastic will reset with its own elasticity, wellhead will be
open.
ModelDimensicns (mm) Weight (cg)Working temperatureRange of seal well
Model for reference:
Model Dimensions (mm) Weight (ka) Working temperature Range of seal well
FHIB-21
FHIB3S — D47Ex218 65.2 0-180
FHIBTO
- 18-99°C
FH2B-35
(0703x323 270 0-280
FH28-70,
FHIG-36 0814x370 370 0-346