Service Parts Bae
Topics May, 1984
&
94785
Foo Ero Fan
AlPExcept, A, B, C
‘Subject
Air Fuel Control (AFC) Barrels and Plungers for PT Fuel Pumps
T&R Manual ‘Shop Manual 0 & i Manual TAR Marval Specs Marval Other
3379084
‘This topic replaces Service Parts Topic 9275-7. Remove and discard Service Parts Topic 9275-7 and replace it with
this topic. This topic gives usage information on AFC piston, Part No. 3274797, and shows the differences between
shaped port AFC barrels, Part Nos. 3077526 and 3074228, for identification.
This topic also contains information on AFC barrel and plunger assemblies available for service.
The single spring AFC sealing o-ring, Part No. 3044942,
supersedes the sealing gasket, Part No. 3023870, use the New old
existing stock of the gaskets, Part No. 3023870, to deple-
tion with the old insert only.
NOTE: When assembling the old insert, with the o-ring, the
parts must be clean, dry, and without any lubricant
The torque specifications of the piston assembly is 3.4 to
4.5 Nem [30 to 40 in-Ib}.
O-Ring Gasket
3044942 3023870
‘An o-ring groove has been added to the single spring AFC.
piston insert, Part No, 3023171. The o-ring groove will
retain the o-ring during assembly and make a better seal
NOTE: Do not use the gasket, Part No. 3023870, with the
new insert.
This is a product improvement and is not subject to
campaign.
‘Cummins Engine Company, inc,, Columbus, i ia 47202-9005
rare Eons Compan), Gorm, Wovtanta Eola tay wu
SEO Bate omen a Page 1 089475-5
The "shorter" dual spring AFC piston, Part No, 3279797
must be used:
1) On B prefix fuel pump codes with calibration flow |18,62 mm [0.615 in |18.16 mm [0.715 in.)
values 1000 PPH or greater. 76.13 mm [0.635 in} I [78.67 mm [0.735 in.
2) When the fuel code notes call for production AFC
assembly, Part No. 3279798.
3) When the fuel pump code calls for barrel and plunger,
Part No. 3058944, and the calibration flow value is
1000 PPH or greater. |
The “'shorter’ dual spring AFC piston must not be used
with other barrel and plunger assemblies. All other dual 3279797 3047278,
spring AFC fuel pump codes use the piston, Part No.
3047278.
The first column, in Tables 1 and 2, is a production assembly part number. The production assembly part number
is sometimes listed in the fuel pump code instead of the service barrel and plunger Part No.. This part number
is not available for service but itis listed for reference only. The column labeled as service part numbers can be
ordered for service.
Table 1: Class Fit AFC Assemblies
Production Service
Assembly Barrel-Plunger__Description/ Section View
Part No. Part No. ‘Comments of Part
3077527 3077526 Shaped port dual
spring AFC
(K38 and K50)
‘a
3070590 3074225 Shaped Port Dual
Spring AFC
3070581 Dual Spring AFC
‘Superseded by
3074225
Page 2 of 594TS5
Table 1: Class Fit AFC Assemblies
Production Service
‘Assembly Barrel-Plunger —_Description/ Section View
Part No. Part No. Comments of Part
3067844 9067834 ‘89" 444XT Dual
Spring AFC.
3059603, 9058944 “88” Dual Spring
AFC
3279798 3058944 ‘88" Dual Spring
AFC With
“Shorter”
Piston, 3279797,
for B prefix
codes
3059604 3058899 Dual Spring
Superseded by
8058944
3061494 3036903 Single Spring
Class Fit9475-5
Tabie 2: Non-Ciass Fit Single Spring AFC
Production Service
Assembly Barrel-Plunger__ Description’ Section View
Part No. Part No. ‘Commenis of Part
3031298 3021068 Non-Ciass Fit,
AFC Barrel
9031297
3031298 3021676 ——_Non-Class Fit,
Non-Vented
Plunger
3031297 3020739 Non-Class Fit,
Vented Plunger
PageTSS
AFC Barrel O-Ring Identification
Reference No. Part No. Description
1 3042542 (O-Ring (Viton - Black with white stripe)
2 3066914 O-Ring (Viton - Brown)
3 3045986 O-Ring (Viton - Black with green stripe)