See Configuration and Options Guide (COG) for all parts that are configurable with this system. Description Marketing part Replacement part CRU/FRU number number Type 2 GB 2 GB (Dual-Rank x8) 1.5 V PC3-10600 CL9 ECC DDR3 44T1486 44T1496 1 1333 MHz VLP RDIMM 2 GB (Single-Rank x8) 1.35 V PC3-10600 CL9 ECC DDR3 46C0560 46C0572 1 1333 MHz VLP RDIMM 4 GB 4 GB (Dual-Rank x8) 1.5 V PC3-10600 CL9 ECC DDR3 44T1596 44T1586 1 1333 MHz VLP RDIMM 4 GB (Dual-Rank x8) 1.35 V PC3-10600 CL9 ECC DDR3 46C0564 46C0576 1 1333 MHz VLP RDIMM 8 GB 8 GB (Quad-Rank x8) 1.35 V PC3-8500 CL7 ECC DDR3 46C0570 46C0582 1 1066 MHz VLP RDIMM 8 GB (Quad-Rank x8) 1.5 V PC3-8500 CL7 ECC DDR3 46C7499 46C7504 1 1066 MHz VLP RDIMM 8 GB (Dual-Rank x4) PC3-10600 CL9 ECC DDR3 1333 49Y1555 49Y1556 1 MHz VLP RDIMM 16 GB 16 GB (Dual-Rank x4) 1.35 V PC3L-10600 CL9 ECC 46C0599 49Y1528 1 DDR3 1333 MHz VLP RDIMM 16 GB (Quad-Rank x4) 1.35 V PC3L-8500 CL7 ECC 90Y3221 90Y3223 1 DDR3 1066 MHz PLANAR-X VLP RDIMM (see Note 1) 32 GB 32 GB (Quad-Rank x4) 1.35 V PC3L-10600 CL9 ECC 00D5008 00D5010 1 DDR3 1333 MHz VLP RDIMM
Notes: 1. The 16 GB 1.35 V 4Rx4 RDIMM (90Y3221) is not supported on the IBM MAX5 V2 for BladeCenter (88Y6128) or the IBM MAX5 for BladeCenter (46M6973).
The BladeCenter HX5 blades contain 16 DIMM sockets.
A maximum of 128 GB of system memory is supported by using an 8 GB DIMM of ECC DDR memory in each of the DIMM sockets. A minimum of two DIMMs per CPU must be installed; DIMMs must be installed in pairs after that. DIMMs must be installed in matched pairs for Mirror Mode.